• 제목/요약/키워드: Black Film

검색결과 293건 처리시간 0.025초

'흑인영화(black film)'의 계승과 다시쓰기(re-writing), 미국 흑인 청년감독 라이언 쿠글러(Ryan Coogler) 연구: <오스카 그랜트의 어떤 하루(Fruitvale Station)> (2013), <크리드(Creed)>(2015), <블랙팬서(Black Panther)>(2018)를 중심으로 (A Study On Succession and Re-writing of 'Black Film', American Youth Film Director Ryan Coogler - Centering on (2013), (2015), (2018))

  • 강내영
    • 한국콘텐츠학회논문지
    • /
    • 제21권1호
    • /
    • pp.210-226
    • /
    • 2021
  • 이 글의 목적은 미국의 흑인 청년감독 라이언 쿠글러의 작품과 영화세계를 분석하는데 있다. 쿠글러 감독은 독립영화에서 출발하여 현재 할리우드에서 활동 중인 흑인 청년감독으로, 자신의 문화정체성을 바탕으로 흑인의 가치관과 내면의식을 영화로 재현하며 미국 '흑인영화'의 계보를 잇고 있는 청년감독이다. 이 글에서는 대표작 <오스카 그랜트의 어떤 하루>(2013), <크리드>(2015), <블랙 팬서>(2018)를 중심으로 그의 작품세계와 영화철학을 분석하고, 당대 미국 사회현실과의 사회맥락적 의미를 규명한다. 이 연구를 통해 쿠글러 감독은 흑인의 정체성과 흑인성(blackness)을 자기반영하는 '흑인영화'의 전통을 충실히 계승하고 있으며, 동시에 할리우드에서 내면화해 온 백인 남성가부장제 이데올로기를 전복하는 21세기 '새로운 할리우드 흑인영화 파워(New Hollywood Black Film Power)'를 상징하는 청년감독임을 확인할 수 있다.

그림자효과를 이용하여 증착한 타이타늄 박막의 미세구조 및 형상 (Microstructure and Morphology of Titanium Thin Films Deposited by Using Shadow Effect)

  • 한창석;진성윤;권혁구
    • 한국재료학회지
    • /
    • 제29권11호
    • /
    • pp.709-714
    • /
    • 2019
  • In order to observe the microstructure and morphology of porous titanium -oxide thin film, deposition is performed under a higher Ar gas pressure than is used in the general titanium thin film production method. Black titanium thin film is deposited on stainless steel wire and Cu thin plate at a pressure of about 12 Pa, but lustrous thin film is deposited at lower pressure. The black titanium thin film has a larger apparent thickness than that of the glossy thin film. As a result of scanning electron microscope observation, it is seen that the black thin film has an extremely porous structure and consists of a separated column with periodic step differences on the sides. In this configuration, due to the shadowing effect, the nuclei formed on the substrate periodically grow to form a step. The surface area of the black thin film on the Cu thin plate changes with the bias potential. It has been found that the bias of the small negative is effective in increasing the surface area of the black titanium thin film. These results suggest that porous titanium-oxide thin film can be fabricated by applying the appropriate oxidation process to black titanium thin film composed of separated columns.

Preparation of a Semi-Conductive Thin Film Sensor for Measuring Occlusal Force

  • Yu, Siwon;Kim, Nari;Lee, Youngjin
    • 센서학회지
    • /
    • 제24권2호
    • /
    • pp.88-92
    • /
    • 2015
  • In order to study the semi-conductive characteristics of carbon black-filled ethylene-propylene-diene monomer (EPDM) composite film, which is used for measuring occlusal force, composite samples with volume ratios of carbon black to EPDM ranging from 30% to 70% were prepared. The process of making a composite film consists of two steps, which involve the preparation of a slurry composition and the fabrication of a thin film using solution casting and a lamination process. To prepare the slurry composition, we dispersed carbon black nanoparticles into an organic solvent before mixing with an EPDM solution in toluene. The mechanical and electrical properties of the resulting carbon black-filled EPDM film were then investigated, and the results showed that the electrical resistance of a film decreases with the increase in the carbon black content. Furthermore, improved elastic recovery was observed after cross-linking the EPDM.

알루미늄 필름, 전도성 직조섬유/나노 카본블랙 탄소섬유복합재료의 전자파 차폐효과에 관한 연구 (A Study on Electromagnetic Interference Shielding Effectiveness of the Aluminum film, Conductive Fabric and Nano Carbon black/Carbon Fiber Reinforced Composites)

  • 한길영;송동한;배지수;안동규
    • 한국기계가공학회지
    • /
    • 제7권4호
    • /
    • pp.10-16
    • /
    • 2008
  • This study investigated electromagnetic interference(EMI) shielding effectiveness(SE) of the aluminum film, conductive fabric and nano carbon black carbon fiber reinforced composites. We fabricated carbon fiber reinforced composites filled with nano carbon black where they bonded aluminum film and conductive fabric. The measurements of SE were carried out frequency range from 300MHz to 1.5GHz. It is observed that the SE of the bonded aluminum film and conductive fabric composites is the frequency dependent, increase with the increase in filler nano carbon black content. The aluminum film bonded composites showed higher SE compared to that of carbon black and conductive fabric. The aluminum film bonded epoxy composite was shown to exhibit up to 80dB of SE. The result that aluminum film bonded composite can be used for the purpose of EMI shielding as well as for some microwave applications.

  • PDF

피복재료가 고랭지 재배 Oriental 백합의 생장과 개화에 미치는 영향 (Effect of Mulching Materials on Growth and Flowering of Oriental Hybrids Lilies in Alpine Area)

  • 홍세진;김학기;박세원
    • 원예과학기술지
    • /
    • 제19권4호
    • /
    • pp.585-590
    • /
    • 2001
  • 본 연구는 강원도 평창의 고랭지에서 1998년 5월부터 10월까지 백합의 생육 향상과 우량구근 생산을 위해 여러 가지 피복재를 재배에 이용하였다. 피복처리재는 톱밥, 흑색필름, 반사필름, 투명필름, 그리고 백흑이중필름을 사용하였다. 백합 공시 품종은 일본 수출에 유리한 'Casablanca'와 'Marco Polo'를 재식하였다. 흑색필름과 백흑이중필름 피복재배는 백합 잎의 생장과 발육을 지연시켰다. 피복재배는 'Casablanca' 품종의 지상부 생체중을 증가시켰다. 구근생장은 흑색필름과 백흑이중필름 피복구를 제외한 처리구는 무처리구와 유사한 구근 생육상을 보여주었다. 톱밥과 반사필름 피복재배가 무처리구와 다른 피복처리구보다 백합 지상부 생육, 지하부 생육, 그리고 구근생육에 유리하였다. 흑색필름은 지상부와 지하부 생육, 그리고 개화 향상에 적합하지 않은 것으로 조사되었다. 투명필름처리와 백흑이중필름은 백합재배 시 무처리구와 비교하여 지상부생육과 구근 생산에 뚜렷한 증진 효과가 없었다. 한편 피복재가 대체적으로 생육을 지연시키는 효과가 있어 관행수확기보다 수확기를 다소 늦추는 것이 백합 구근생산에 유리할 것으로 판단된다.

  • PDF

흑색 P. E. Film 피복에서 초당옥수수의 생육기간을 표시하는 GDD모델 개발 (A GDD Model for Super Sweet Corn Grown under Black P. E. Film Mulch)

  • 이석순;양승규;홍승범
    • 한국작물학회지
    • /
    • 제53권1호
    • /
    • pp.42-49
    • /
    • 2008
  • 흑색 P E. film 피복과 노지재배에서 초당옥수수를 원하는 시기에 수확할 수 있는 파종기를 결정하는 방법을 찾기 위하여 "Cambella-90"을 4월 1일에서 6월 30일까지 10일 간격으로 파종한 후 파종기와 관계없이 파종에서 수확까지 생육기간을 일정하게 나타낼 수 있는 GDD 모델과 기준온도를 설정하였으며, 그 결과를 요약하면 다음과 같다. 1, 초당옥수수의 생육기간은 파종기에 따라 흑색 P. E. film 피복에서는 $64{\sim}93$일, 노지에서는 $66{\sim}97$일로 파종기간 CV는 각각 13.8 및 14.2%이었다. 그러나 생육기간을 GDD로 표시하면 최적 기준온도를 적용하였을 때 파종기간 GDD의 CV는 모델에 따라 흑색 P. E. film 피복에서는 $1.1{\sim}2.4%$, 노지에서는 $1.5{\sim}1.8%$이었다. 2. 초당옥수수의 생육기간을 나타내는 가장 적합한 GDD 모델은 파종에서 수확까지 일 최고기온과 최저기온을 합하여 2로 나눈 후 기준온도를 빼서 GDD를 계산하되 일 최고 기온이 $30^{\circ}C$가 넘을 때는 일 최고기온에서 $30^{\circ}C$를 넘는 만큼 $30^{\circ}C$에서 빼어 그 값을 최고기온으로 대치하고, 최저기온이 기준온도 이하일 때는 기준온도로 대치하여 계산하는 방법이었다. 이때 기준온도는 흑색 P. E. film 피복에서는 $9^{\circ}C$, 노지재배에서는 $10^{\circ}C$이었다. 3. 원하는 시기에 수확하기 위한 파종기를 결정하기 위해서는 그 지역의 누적 GDD표를 만들고, 수확 예정일의 누적 GDD에서 그 품종의 GDD를 빼서 그 GDD에 해당되는 일자를 선택하면 된다.

Transparent Black Phosphorus Nanosheet Film for Photoelectrochemical Water Oxidation

  • Choi, Chang-Ho
    • 청정기술
    • /
    • 제27권3호
    • /
    • pp.217-222
    • /
    • 2021
  • Although monolayer black phosphorus (BP) and few-layer BP nanosheets (NSs) have been extensively studied as promising alternatives to graphene, research has focused primarily on atomically thin-layered BP in an isolated form. In order to realize the practical applications of BP-related devices, a BP film based on continuous networking of few-layer BP NSs should be developed. In this study, a transparent BP film with high quality was fabricated via a vacuum filtration method. An oxygen-free water solvent was used as an exfoliation medium to avoid significant oxidation of the few-layer BP NSs in liquid-phase exfoliation. The exfoliation efficiency from bulk BP to the few-layer BP NSs was estimated at 22%, which is highly efficient for the production of continuous BP film. The characteristics of the high-quality BP film were determined as 98% transparency, minimum oxidation of 18%, structural stability, and an appropriate bandgap of about 1.8 eV as a semiconductor layer. In order to demonstrate the potential of the BP film for photocatalytic activity, we performed photoelectrochemical water oxidation of the transparent BP film. Although its performance should be improved for practical applications, the BP film could function as a photoanode, which offers a new potential semiconductor in water oxidation. We believe that if the BP film is adequately engineered with other catalysts the photocatalytic activity of the BP film will be improved.

단감의 저온저장방법(低溫貯藏方法) 개발(開發)에 관(關)한 연구(硏究) (Development of Low-Temperature Storage Method of Sweet Persimmons)

  • 정종훈;서상룡
    • Journal of Biosystems Engineering
    • /
    • 제19권3호
    • /
    • pp.232-246
    • /
    • 1994
  • This study was conducted to develop the long-tenn storage method to minimize the black spot occurred on the surface of persimmons stored in the films at low temperature. The storage experiments were done with different films and persimmon varieties at $0^{\circ}C$ storage condition for 5 months, and then the physical and chemical characteristics of persimmons were tested monthly. The results were as follows : 1. The film 160 made from zeolites showed highest performance in well storings sweet persimmons for 5 months, compared with other films by eyesight. The initial moisture condensation inside the films seemed to cause the black spots on persimmons, and the effect of the film holes was never significant to prevent the black spots. 2. The sugar content was ranged from $14^{\circ}Brix$ to $15^{\circ}Brix$ regardless of film types and persimmom varieties, and it changed little for storage of 5 months. 3. The decrease rate of persimmom weight in the film 160 and 180 was 0.3% for storage of 5 months, while those in other films reached to 2%. The decrease rate of persimmon weight was least in the film 160 and 180. 4. The hardness of Fuyu least decreased in the films 160 and 380. It was changed from 36 kg/cnf to 8-27 $kg/cm^2$, and that of Charyang was from 31 $kg/cm^2$ to 8-10 $kg/cm^2$ for storage of 5 months. The hardness of Charyang rapidly decreased as storage period increased. 5. The average rate of black spot(defect rate) of Fuyu measured by a computer image processing system was least in the film 160 by 0.5%, but those in other films was ranged from about 5% to 20% for storage of 5 months. The rate of black spot of Charyang was less than that of Fuyu among most of films. 6. The intensity, hue, and saturation in persimmon color changed according to storage period. Especially, the intensity of persimmon colors decreased as storage period increased, but it was least in the film 160. 7. An integrated long-term storage method of sweet persimmons was suggested in the basis of the experiments and literature reviews.

  • PDF

남부지방에서 초당옥수수의 경제적 파종한계기 (Planting Time for the Economic Yield of a Super Sweet Corn Hybrid in the Southern Part of Korea)

  • 양승규;홍승범;이석순
    • 한국작물학회지
    • /
    • 제52권3호
    • /
    • pp.325-333
    • /
    • 2007
  • 남부지방에서 초당옥수수의 경제적 재배한계기를 결정하기 위하여 경북 경산에서 "Cambella 90"을 2003년과 2004년 4월 1일부터 10일 간격으로 흑색 P E. film 피복과 노지에서 파종한 후 지온, 생육 및 자수특성을 조사한 결과를 요약하면 다음과 같다. 1. 일 최고지온은 흑색 P. E. film 피복에서 노지보다 낮았지만 최저지온은 높았고, 토양수분은 흑색 P. E. film 피복에서 노지보다 적습수준을 유지하였다. 2. 출아율, 입묘율, 간장 및 상품성 있는 자수수는 흑색 P. E. film 피복에서 노지에서보다 높았다. 3. 파종기가 지연될수록 생육기간이 단축되었다. 흑색 P. E. film 피복에서 노지보다 출수기가 빨랐고, 그 정도는 파종기가 빠를수록 더 컸으며, 수확기의 분포는 $3{\sim}5$일이었다. 4. 초당옥수수 "Cambella 90"의 경제적 조파한계기는 4월 초순, 만파한계기는 6월 20일 경이었다.

카본블랙과 고분자 바인더로 구성된 보호필름을 통한 리튬금속 음극의 성능개선 (Enhanced Performance of Li Metal Negative Electrode using Protection Film by Carbon Black and Polymeric Binder)

  • 노성호;류다영;장영석;류지헌
    • 전기화학회지
    • /
    • 제25권1호
    • /
    • pp.42-49
    • /
    • 2022
  • 본 연구에서는 리튬금속 수지상의 형성을 효과적으로 억제하기 위해 리튬금속 표면에 물리적 보호막을 제공할 필름을 제조하였다. 필름은 기계적 강도가 우수하고 전기화학적 안정성이 높은 바인더인 유기물 polyvinylidene fluoride (PVDF)와 전기전도성이 우수한 무기물 입자인 카본블랙(Super-P)을 사용해 유무기 복합체 기반의 필름을 제조하고 리튬금속 음극의 표면에 적용하였다. 먼저 필름이 내부단락을 지연시키는 정도를 확인하기 위해 일정한 값의 전류를 계속 인가하며 내부단락의 발생을 측정하였다. 그 결과 보호필름에 사용된 카본블랙 함량이 증가함에 따라 내부단락 시점이 지연되었으며, 필름을 사용하지 않은 리튬금속 전극과 비교할 때 내부단락 시점이 크게 지연된 것을 확인하였다. 또한, 필름의 두께와 함량을 달리하여 전기화학적 성능을 평가한 경우, 필름의 두께가 두꺼운 것이 사이클 성능이 좋지 않았고 카본블랙 함량이 늘어날수록 사이클 성능이 개선됨을 확인하였다. 이처럼 카본블랙을 포함한 고분자 필름을 리튬금속 표면에 적용함으로써 내부단락 시점이 지연되고 사이클이 진행되는 동안 낮은 과전압을 나타내는 것이 확인되었지만, 추가적인 개선을 통해 더 안정한 사이클 성능이 확보되어야 할 것이다.