• The korean journal of orthodontics
• /
• v.15 no.1
• /
• pp.115-121
• /
• 1985

This study was intended to investigate the effect of mesiodistal crown widths of the anterior teeth on the incisor relationship and to determine whether incisor width ratio and anterior width ratio could be used to assess interarch tooth width harmony. From the casts taken from 63 subjects, 26 of open bite, 18 of deep bite and 19 of normal over bite with age of 17-20, mesiodistal crown widths of maxillary and mandibular 6 anterior teeth were measured with Boley gauge. On the basis of tooth measurements, anterior and incisor width ratio were calculated. The cephalograms were taken from same subjects to measure the degree of over bite and over jet and to compare the craniofacial bony structures between open bite, deep bite and normal over bite. Correlations among the anterior width ratio, incisor width ratio, over bite and over jet were calculated. The results were as follows. 1. There were no differences in mesiodistal widths of anterior teeth, incisor width ratio and anterior width ratio between open bite, deep bite and normal over bite. 2. The incisor width ratio and anterior width ratio can be useful in the assessment of tooth width harmony because the incisor width ratio and anterior width ratio were stable statistically and significantly correlated with each other. 3. Over bite and over jet were not correlated with incisor width ratio and anterior width ratio.

• The korean journal of orthodontics
• /
• v.20 no.2
• /
• pp.333-354
• /
• 1990

This study was designed to analyse vertical dysplasia such as open bite or deep bite in persons with skeletal Class III malocclusion. The subjects consisted of 60 control patients, 40 Class III open bite patients and 40 Class III deep bite patients. The mean age was 19.8 years in the control group, 17.8 years in the Class III open bite group and 16.5 years in the Class III deep bite group. The results were as follows: 1. In Class III malocclusion patients, the characteristics of the vertical dysplasia are under the palatal plane. 2. In Class III malocclusion patients, the items showing the characteristics of the vertical dysplasia are mandibular plane angle, lower gonial angle, lower facial height, dental height & inclination of the upper first molar, interincisal angle, maxillary & mandibular occlusal plane angle. 3. In Class III malocclusion patients, LPFH/LAFH ratio shows the highest significance among the facial height ratios. 4. In Class III malocclusion patients, open bite group has a upward cant of maxillary occlusal plane & downward cant of mandibular occlusal plane. And deep bite group has a downward cant of maxillary occlusal plane & upward cant of mandibular occlusal plane. 5. In Class III malocclusion patients, the molar teeth of the open bite group are measially inclined and those of the deep bite group are upright.

• The korean journal of orthodontics
• /
• v.13 no.1
• /
• pp.15-30
• /
• 1983

This study was to investigate the effect of functional pressures of the tongue and lips on the incisor relationship. The incisor relationship was devided into two categories; one is vertical relationship which is subdevided into open bite, normal overbite and deep bite on the basis of overbite, and the other is anteroposterior relationship which is subdevided into cross bite, normal overjet and large overjet on the basis of overjet. The functional tongue and lip pressures exerted to incisors were measured with subminiature pressure sense from the 99 subjects, 19 of normal overbite and overjet, 26 of open bite, 18 of deep bite, 17 of cross bite and 19 of large overjet with age of 17-20, and cephalograms were taken from the same subjects. Functional pressures were analyzed and correlated to craniofacial veriables. The results of present investigation led to the following conclusions. 1. There were no differences in functional and maximum pressures by the tongue and lips exerted to maxillary incisors between normal occlusion, open bite, deep bite, cross bite and large overjet. 2. Significant differences in functional and maximum pressures by the tongue and lips exerted to mandibular incisors have been shown to exist between open bite and deep bite, but no differences between cross bite and large overjet. 3. Equilibrium between tongue pressures and lip pressures did not exist. 4. Significant differences in the ratio of upper functional and maximum pressures to lower pressures of the tongue and lips exerted to upper and lower incisors have been shown to exist between open bite and deep bite, and no differences between cross bite and large overjet. 5, There was significant correlation between functional and maximum pressures exerted to mandibular incisors and craniofacial variables, but not significant correlation between functional and maximum pressures exerted to maxillary incisors and craniofacial variables.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1995.10a
• /
• pp.157-166
• /
• 1995

A large crank shaft for ship engine consists of several components, such as throw, jornal, pin and flange. These compoents are individually made by open-die forging followed by machining and they are thermally fitted to form the crankshaft. In the present investigation, it was attempted to design an optimum preform for the throw by use of the spread coefficient. The spread coefficient found in the literature was confirmed by comparison with experimental results using plasticine. However, the preform designed by the spread coefficient was unable to produce the final product. The reason was found that the spread coefficient differs distinctly for the magnitude of bite ratio. Therefore, another spread coefficient, especially for low bite ratios, was proposed and the preform was redesigned. It was found that the new preform was able to produce the final product.

• Transactions of Materials Processing
• /
• v.20 no.4
• /
• pp.284-290
• /
• 2011

The front end bending(FEB) behavior of material that usually occurs in plate rolling is investigated. In this paper, a rollbite profile map approach that systematically predicts the FEB slope is presented. It is based on the concurrent use of shape factors and reduction ratios to ensure an accurate value of the FEB and its slope. In order to obtain the unit roll-bite profile map, the FEB slope model was decomposed into a temperature deviation component and a roll-velocity deviation component. By mapping the results of a series of finite element analyses to the unit functions of the roll-bite profile map, it was possible to obtain a realistic prediction of the FEB slope applicable to an actual plate rolling process. Thereby, the usefulness of the present approach is clearly demonstrated.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.4
• /
• pp.204-212
• /
• 2022

Purpose: The aim of this study was to compare changes of bite force, occlusal contact area, and dynamic functional occlusion analysis after occlusal stabilization splint therapy during sleep for one month in a patient with bruxism. Materials and Methods: From October 2021 to July 2022, sleep bruxism of 30 patients who visited the Department of Oral Medicine at Yonsei University College of Dentistry Hospital were recruited. The participants were divided into two groups: using an occlusal stabilization splint during sleep (treatment; n = 15) and not using an occlusal stabilization splint (control; n = 15). Before using the occlusal stabilization splint and one month after, bite force, occlusal contact area and dynamic functional occlusion analysis (ratio of left/right bite forces, average bite forces, maximum bite forces, and maximum contact areas during lateral and anterior and posterior mandibular movements) were performed. Results: There was no difference in bite force and occlusal contact area between the treatment group using the occlusal stabilization splint and the control group not using the occlusal stabilization splint during sleep for one month. However, there were significant differences in the average bite force and maximum bite force in the lateral and anterior and posterior mandibular movements and the maximum contact areas in the anterior and posterior mandibular movements. Conclusion: The occlusal stabilization splint is helpful for sleep bruxism patients who lateral and anterior and posterior mandibular movements. In addition, further studies are needed a double-blind study with a large population.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.15 no.1
• /
• pp.1-10
• /
• 2017

Purpose: This study was conducted to identify predictors of serious poisoning in patients with snake bite based on initial findings. Methods: We conducted a retrospective study of patients with snake bite who were treated at the emergency department between January 2010 and December 2016. The patients were divided into two groups according to the severity of symptoms based on the traditional snakebite severity grading scale. The mild poisoning group (MP) was classified as those who had a grade I snakebite severity during the hospital stay, and the severe poisoning group (SP) was classified as patients who had grade I at the time of admission, but progressed to grade II-IV during hospitalization. Initial clinical manifestations and laboratory findings of the two groups were compared. Results: Bite to hospital time intervals of SP were longer than those of MP (p=0.034), and the local effect score (LES) was higher in SP (p<0.001). Laboratory analyses revealed that creatine phosphokinase (p=0.044), creatine phosphokinase MB isoenzyme (CK-MB, p=0.011) and serum amylase (p=0.008) were significantly higher in SP. LES, CK-MB and serum amylase were significant prognostic predictors as indicated by univariate logistic regression analysis. Multivariate analysis revealed the following two significant predictors: LES (odds ratio=3.983, p<0.001) and serum amylase (odds ratio=1.020, p=0.017). Conclusion: In managing cases of snake bites, clinical manifestations and laboratory findings must be carefully evaluated. LES and serum amylase are predictive factors for severe poisoning, which is especially important to rapid determination of the intensive care of the patient.

• Imaging Science in Dentistry
• /
• v.53 no.4
• /
• pp.355-363
• /
• 2023

Purpose: Sonographic elastography can be used to evaluate the hardness of muscle tissue through the application of compression. Strain elastography gauges hardness through the comparison of echo sets before and after compression. This study utilized ultrasonography to measure the thickness and hardness of the masseter muscle in individuals with temporomandibular joint(TMJ) osteoarthritis. Materials and Methods: This study included 40 patients who presented with joint pain and were diagnosed with TMJ osteoarthritis via diagnostic cone-beam computed tomography, along with 40 healthy individuals. The thickness and hardness of each individual's masseter muscle were evaluated both at rest and at maximum bite using ultrasonography. The Mann-Whitney U test and the chi-square test were employed for statistical analysis, with the significance level set at P<0.05. Results: The mean thickness of the resting masseter muscle was 0.91 cm in patients with osteoarthritis, versus 1.00 cm in healthy individuals. The mean thickness of the masseter muscle at maximum bite was 1.28 cm in osteoarthritis patients and 1.36 cm in healthy individuals. The mean masseter elasticity index ratio at maximum bite was 4.51 in patients with osteoarthritis and 3.16 in healthy controls. Significant differences were observed between patients with osteoarthritis and healthy controls in both the masseter muscle thickness and the masseter elasticity index ratio, at rest and at maximum bite (P<0.05). Conclusion: The thickness of the masseter muscle in patients with TMJ osteoarthritis was less than that in healthy controls. Additionally, the hardness of the masseter muscle was greater in patients with TMJ osteoarthritis.

• The korean journal of orthodontics
• /
• v.23 no.4 s.43
• /
• pp.455-474
• /
• 1993

Degenerative joint disease(DJD) has hun known as one of the diseases which affect the middleor old-aged people. But as orthodontists are getting interested in the adult orthodontics, it is not rare for them to meet the open-bite patients with the TMJ DJD in their clinics. The purpose of this article is to investigate the cephalometric characteristics of the open-bite cases with TMJ DJD. Twelve TMJ DJD patients($15.1\~39.5$ years old) were selected from the patients who visited Department of Orthodontics, Seoul National University Hospital. Cephalograms were taken and means from 60 measurements were compared by t-test with those of the fifty four healthy adults($20.0\~26.7$ years old) who have normal occlusion and TMJ. In this study male and female are compared respectively, for in the normal samples 26 measurements showed significant differences between the male and the female. The results and conclusions axe as follows: 1 In DJD group, ANB and Angle of convexity decreased, which means the retruding of the mandible. The interincisal angle was smaller than that of the normal group. The means of the overbite were -2.1mm in male and -3.0mm in female, and the means of the overjet were 5.6mm in male and 6.7mm in female. The profile was similar to that of Angle's Class II div.1 open-bite. 2. SN-GoMe and FMA increased in DJD but SN-PP and FH-PP did not show any significant difference. In TMJ DJD open-bite cases, the bony structure lower than the palatal plane seemed to play an important role in developing open-bite. 3. In DJD group, PH-ArGo, SArGo and Y-sxis angle increased significantly, but genial angle showed no significant difference. The means of hか were 50.1mm in male and 40.2mm in female, which were significantly smaller than those of the normal(56.5mm in male, 50.9mm in female). These findings seemed to indicate the posterior rotation of mandible resulted from the shortening of the ramus height. 4. Anterior faical height(AFH), upper anterior facial height(UAFH) and lower anterior facial height (LAEH) of DJD showed no significant increase as compared with those of the noraml group. There was no significant difference in the ratio of upper anterior facial height to lower anterior facial height(UAFH/LAFH). But, lower posterior facial height(LPFH) was significantly smaller than that of the normal group. 5. It was thought that the peculiar profile of the TMJ DJD open-bite was resulted from the posterior rotation of mandible as the ramus became short following the degerative destruction of of the condylar head and neck.

• Journal of Oral Medicine and Pain
• /
• v.31 no.4
• /
• pp.347-354
• /
• 2006

Most patients suffering from TMD appear to have unsatisfactory masticatory function and compromised values of bite force. The purposes of this study were to investigate and compare bite force between affected and unaffected sides of patients with unilateral TMD and to evaluate its relation with duration of TMD. 42 patients with unilateral TMD, from Department of Oral Medicine, Dankook University Dental Hospital, were selected for this study. The ratio of men to women was 9:33 and their mean age of $27.2{\pm}10.4$ years. The bite forces were measured over both canines (for anterior bite force) and $1^{st}$ molars (for posterior bite force) using a bite force recorder while all the subjects were asked to clench successively for 3 seconds not until pain was felt. They were compared with those measured from bilateral TMD patients(N=6, M:F=1:5, mean age: $23.0{\pm}27.3$ years). The unilateral TMD patients were divided into time groups according to duration of TMD on the basis of 1 and 6 months, respectively. Paired and unpaired t-tests were used for statistical analysis. Unilateral TMD patients in this study showed that the affected sides had significantly lower bite force than the unaffected sides(force difference of about 7-8 kgf, p<0.05) while there was no significant sides difference in the bilateral patients. Nor did bite force on the affected sides reveal significant difference between unilateral and bilateral TMD patients. With regards to TMD duration, there was significant difference between the patients with TMD < 6 months and $\geq$ 6 months (p<0.05) while no significant difference existed between < 1 month and $\geq$ 1 month. The results of this study indicated that unilateral TMD patients can exhibit more reduced bite force on the affected sides compared with that on the unaffected sides and that bite force on the unaffected sides might be deteriorated more as longer did TMD last.