• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.723-728
• /
• 1999

In this paper, we designed a Circular Path Built-In Self Test circuit and embedded it into a simple 8-bit microprocessor. Register cells of the microprocessor have been modified into Circular Path register cells and each register cells have been connected to form a scan chain. A BIST controller has been designed for controlling BIST operations and its operation has been verified through simulation. The BIST circuit described in this paper has increased size overhead of the microprocessor by 29.8% and delay time in the longest delay path from clock input to output by 2.9㎱.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.200-203
• /
• 2003

By minimizing the burst error of data and correcting the error, we can define the convolution coding and interleaving in IEEE 802.11a wireless tan system. Two step block interleaver was decided by coded bits per OFDM symbol and due to this it comes to the delay time in IEEE 802.11a. This is the point of the question which we must consider. We try to decrease the delay time by all 48-clock from interleavings, and we have proposed a way carried out the interleaving outputs per symbol. So in comparison with the existing interleaver, we can decrease the delay time in reading and writing data, as well as reduce the delay time of bit re-ordering per symbol. Also this scheme is apply in all x-QAM cases.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4C
• /
• pp.337-342
• /
• 2010

In this paper, a new architecture for digit-parallel/bit-serial GF($2^m$) multiplier with low complexity is proposed. The proposed multiplier operates in polynomial basis of GF($2^m$) and produces multiplication results at a rate of one per D clock cycles, where D is the selected digit size. The digit-parallel/bit-serial multiplier is faster than bit-serial ones but with lower area complexity than bit-parallel ones. The most significant feature of the digit-parallel/bit-serial architecture is that a trade-off between hardware complexity and delay time can be achieved. But the traditional digit-parallel/bit-serial multiplier needs extra hardware for high speed. In this paper a new low complexity efficient digit-parallel/bit-serial multiplier is presented.

• Information and Communications Magazine
• /
• v.11 no.8
• /
• pp.60-77
• /
• 1994

This paper presents a survey of video coding schemes which use wavelet transform for the videophone on very low bit rate commun ication chan nel( ego 10 Kbps Public Service Telephone Network). Firstly, we introduce the standardization efforts to make the low bit rate videophone architecture and the typical application of low bit rate video coding scheme. Secondly, we summarize the several requirements on videophone, delay, encoder/decoder complexity, low bitrate, and progressive transmission capability. Third, we review the basic theory of wavelet transform without much mathematics. We compare the wavelet transform with short-time fourier transform and subband filters. Fourth, we summarize the video coding schemes proposed so far, and evaluate them with Ule requirements. Lastly, we conclude with fu¬ture research directions.

• ETRI Journal
• /
• v.30 no.2
• /
• pp.255-260
• /
• 2008

We compare the performance of a wavelength remodulated wavelength-division-multiplexed passive optical network implemented using Manchester-coded or inverse-return-to-zero (IRZ)-coded signal downstream and non-return-to-zero remodulated signal upstream. We investigate the effects of varying differences between downstream and upstream bit rates on the two coding schemes. When the bit rate ratio of upstream to downstream is less than or equal to 50%, the performance of Manchester coding is better than that of IRZ coding. However, when the bit rate ratio of upstream to downstream is higher than 50%, Manchester code requires appropriate time delay between upstream and downstream signals, whereas IRZ code needs reduced extinction ratio in the downstream signal.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.10
• /
• pp.67-72
• /
• 1994

In this paper we suggest a 32 bit high speed parallel multiplier which plays an important role in digital signal processing. We employ a bit-pair recoding Booth algoritham that gurantees n/2 partial product terms, which uniformly handles the signed-operand case. While partial product terms are generated, a special method is suggested to reduce time delay by employing 1's complement instead of 2's complement. Later when partial products are added, the additional 1 bit's are packed in a single partial product term and added to in the parallel counter. Then 16 partial product terms are reduced to two summands by using successive parallel counters. Final multiplication value is obtained by a BLC adder. When this multiplier is simulated under 0.8$\mu$CMOS standard cell we obtain 30ns multiplier speed.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.8
• /
• pp.1217-1226
• /
• 1989

This paper describes a design of hardware system for real time automatic diagnosis of ECG arrhythmia based on pipeline processor consisting of three microcomputer. ECG data is acquisited by 12 bit A/D converter with hardware QRS triggered detector. Four diagnostic parameters-heart rate, morpholigy, axis, and ST segment-are used for the classification and the diagnosis of arrhythmia. The functions of the main CPU were distributed and processed with three microcomputers. Therefore the effective data process and the real time process using microcomputer can be obtained. The interconnection structure consisting of two common memory unit is designed to decrease the delay time caused by data transfer between processors and be which the delay time can be taken 1% of one clock period.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.731-733
• /
• 1988

This paper describes a design of hardware system for real time automatic diagnosis of ECG arrhythmia based on pipeline processor consisting of the three microcomputer. ECG data is acquisited by 12 bit A/D converter with hardware QRS triggered detector. Four diagnostic parameters - heart rate, morphology, axis, and ST segment - are used for the classification and the diagnosis of arrhythmia. The functions of the main CPU were distributed and processed with three microcomputers. There-fore the effective data process and the real time process using microcomputer can be obtained. The interconnection structure consisting of two common memory units is designed to decrease the delay time caused by data transfer between processors and by which the delay time can be taken 1 % of one clock period.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.6
• /
• pp.1-8
• /
• 1998

In this paper, we designed a low power 8bit ELM adder with static CMOS and hybrid logic styles on a chip. The designed 8bit ELM adder with both logic styles was fabricated in a 0.8$\mu\textrm{m}$ single-poly double-metal, LG CMOS process and tested. Hybrid logic style consists of CCPL(Combinative Complementary Pass-transistor Logic), Wang's XOR gate and static CMOS for critical path which determines the speed of ELM adder. As a result of chip test, the ELM adder with hybrid logic style is superior to the one with static CMOS by 9.29% in power consumption, 14.9% in delay time and 22.8% in PDP(Power Delay Product) at 5.0V supply voltage, respectively.

• Progress in Superconductivity
• /
• v.7 no.2
• /
• pp.109-113
• /
• 2006

The Arithmetic Logic Unit (ALU) is a core element of a computer processor that performs arithmetic and logic operations on the operands in computer instruction words. We have developed and tested an RSFQ multi-bit ALU constructed with half adder unit cells. To reduce the complexity of the ALU, We used half adder unit cells. The unit cells were constructed of one half adder and three de switches. The timing problem in the complex circuits has been a very important issue. We have calculated the delay time of all components in the circuit by using Josephson circuit simulation tools of XIC, $WRspice^{TM}$, and Julia. To make the circuit work faster, we used a forward clocking scheme. This required a careful design of timing between clock and data pulses in ALU. The designed ALU had limited operation functions of OR, AND, XOR, and ADD. It had a pipeline structure. The fabricated 1-bit, 2-bit, and 4-bit ALU circuits were tested at a few kilo-hertz clock frequency as well as a few tens giga-hertz clock frequency, respectively. For high-speed tests, we used an eye-diagram technique. Our 4-bit ALU operated correctly at up to 5 GHz clock frequency.