• Transactions on Electrical and Electronic Materials
• /
• 제8권4호
• /
• pp.153-156
• /
• 2007

Structural and electrical properties of the fully crystallized-bismuth magnesium niobate ($Bi_2Mg_{2/3}Nb_{4/3}O_7$, BMN) films with 15 mol% excess bismuth deposited on Pt bottom electrode by pulsed laser deposition are characterized for various deposition temperatures. The BMN films were crystallized with a monoclinic structure from $300^{\circ}C$ and the surface roughness slightly decreases with increasing deposition temperature. The capacitance density of the films increases with increasing deposition temperature and especially, films deposited at $400^{\circ}C$ exhibit a capacitance density of approximately $620nF/cm^2$. The crystallized BMN films with approximately 170 nm thickness exhibit breakdown strength above 600 kV/cm (${\leq}10V$) irrespective of deposition temperature and a leakage current density of approximately $2{\times}10^{-8}A/cm^2$ at 590kV/cm (at 10 V).

• 공업화학
• /
• 제3권1호
• /
• pp.53-63
• /
• 1992

프로필렌을 선택산화시켜 아크로레인을 제조하는 반응을 Bi-molybdate 촉매상에서 고정층 반응기를 사용하여 연구하였다. ${\alpha}-Bi_2Mo_3O_{12}$위에 $MoO_3$를 담지시킨 M/BM-series 촉매는 함침법으로 제조되었고, 역으로 BM/M-series 촉매는 $MoO_3$위에 ${\alpha}-Bi_2Mo_3O_{12}$을 침전시켜 제조하였다. 또한 촉매의 특성분석을 위하여 질소흡착과 XRD, SEM을 이용하였다. M/BM-series 촉매에서는 $MoO_3$가 작은 입자로 분산되고 ${\alpha}-Bi_2Mo_3O_{12}$의 결정구조는 $MoO_3$상이 추가되어도 그 형상이 변하지 않는 채로 유지되었으나, BM/M-series 촉매의 표면형상 및 전체 구조는 촉매제조 중에 생기는 침전물인 $Bi(OH)_3$가 소성 도중 $MoO_3$와 반응하여 ${\alpha}-Bi_2Mo_3O_{12}$을 형성하는 관계로 그 조성에 따라 매우 불규칙적으로 변화하였다. 반응실험 결과, 두 종류의 촉매 모두에서 excess $MoO_3$가 포함되었을 때 활성이 크게 증가하였는데, 이는 선별산화반응이 주로 ${\alpha}-Bi_2Mo_3O_{12}$에서 일어나고 $MoO_3$는 ${\alpha}-Bi_2Mo_3O_{12}$에 산소 공급을 원활히 하여 활성을 증가시키기 때문으로 판명되었다. 또한 이러한 활성 증가는 ${\alpha}-Bi_2Mo_3O_{12}$와 기계적 혼합물 (mechanical mixture)에서도 관찰되었다.

• 한국자기학회지
• /
• 제4권1호
• /
• pp.39-43
• /
• 1994

열분해법을 이용하여, 양이온 비가 Bi:Y:Fe=1.5+u:1.5:5 및 Bi:Y:Fe=1.5:1.5+v:5 ($-0.7{\leq}u{\leq}1.0,\;-0.7{\leq}v{\leq}1.3$)인, 비화학양혼조성을 갖는 비스머스 치환 이트리움 철 가네트 다결정 박막을 제조했다. 각 열처리 온도에서 생성된 이 박막들내의 결정상들을 고출력 X-선 최절 분석기를 이용하여 분석했다. 또한, u, v에 따른 이 박막들의 포화자화, 큐리온도 및 파장 633nm에서의 훼러데이 회전각을 측정했다. 비스머스 및 이트리움을 화학양론조성보다 소량 투여한 박막들에서는, 가네트상과 함께 불순물상이 관찰되었다. 한편, 비스머스 및 이트리움을 과량 투여한 박막들에서는 불순물상에 의한 회절 라인은 검출되지 않고, 가네트상에 의한 최절 라인만이 넓은 조성 영역($0{\leq}u{\leq}0.5,\;0{\leq}v{\leq}0.7$)에서 관찰되었다. 그러나, 이 과량 투여한 박막들의 자기적 및 자기광학적 특성은, X-선 분석으로는 검출되지 않는 미량의 불순물상이 존재한다고 가정하는 것에 의해서만 설명할 수 있었다.

• Journal of information and communication convergence engineering
• /
• 제4권4호
• /
• pp.158-161
• /
• 2006

[ $Bi_2Sr_2Ca_nCu_{n+1}O_y(n{\geq}0)$ ] thin film is fabricatedvia two different processes using an ion beam sputtering method i.e. co-deposition and layer-by-layer deposition. A single phase of Bi2212 can be fabricated via the co-deposition process. While it cannot be obtained by the layer-by-layer process. Ultra-low growth rate in our ion beam sputtering system brings out the difference in Bi element adsorption between the two processes and results in only 30% adsorption against total incident Bi amount by layer-by-layer deposition, in contrast to enough Bi adsorption by co-deposition.

• Corrosion Science and Technology
• /
• 제5권3호
• /
• pp.94-98
• /
• 2006

The next generation nuclear power reactor will use Pb-Bi as the cooling material. The steel structure materials such as HT-9 used in the reactor suffer from corrosion when they are exposed to high temperature Pb-Bi. Therefore corrosion should be prevented to use Pb-Bi as the coolant material without any safety problem. One method is to control the oxygen content in Pb-Bi. An appropriate amount of oxygen in Pb-Bi can produce a thin oxide layer on steel, and this layer protects the steel from corrosion attack. Since the required oxygen content in Pb-Bi is in the range of $10^{-5}$ to $10^{-7}$ wt%, this small oxygen content can be controlled by flowing a mixture of hydrogen gas and water vapor. The stagnant corrosion test of HT-9 samples was performed by controlling the oxygen content up to 2,000 hours. The corrosion behavior of HT-9 was analyzed at the temperatures of $500^{\circ}C$ and $650^{\circ}C$ with a reduced condition and a oxygen content of $10^{-6}$ wt%.

• Bulletin of the Korean Chemical Society
• /
• 제19권12호
• /
• pp.1283-1293
• /
• 1998

A solid state chemical approach to discover new mateials with enhanced thermoelectric properties is described. The aim is to construct three-dimensional bismuth chalcogenide framework structures which contain tonically interacting alkali or alkaline earth atoms. The alkali atoms tend to have soft "rattling" type phonon modes which result in very low thermal conductivity in these materials. Another desirable feature in this class of compounds is the low crystal symmetry and narrow band-gaps. Several promising materials such as BaBiTe3, KBi6.33S10, K2Bi8S13, β-K2Bi8Se13, K2.5Bi8.5Se14, Ba4Bi6Se13, Eu2Pb2Bi6Se13, Al1+xPb4-2xSb7+xSe15 (A=K, Rb), and CsBi4Te6 are described.

• 한국표면공학회지
• /
• 제29권6호
• /
• pp.621-627
• /
• 1996

$SrBi_{2x}TaO_9$ ferroelectric thin films were prepared on platinized silicon substrates using MOD proces, and crystallization behavior of the films was investigated with variation of the annealing temperature and Bi content x. Crystalline phase of bismuth layered perovskite structure was formed even by baking the films at $800^{\circ}C$ for 5 minutes in air, and was not changed by annealing at temperatures raning from $700^{\circ}C$ to $900^{\circ}C$ for 1 hour in oxygen ambient. When $SrBi_{2x}TaO_9$ thin films ($0.8\lex\ie1.6$) were annealed at $800^{\circ}C$, Preferred orientation of the films along c-axis was observed with $x\ge1.2$. With increasing Bi content x, surface morphology of the films was changed from equiaxed grains to elongated grains.

• Current Optics and Photonics
• /
• 제6권1호
• /
• pp.32-38
• /
• 2022

Erbium-doped fiber amplifiers (EDFAs) have saturated the technological market but are still widely used in high-speed and long-distance communication systems. To overcome EDFA saturation and limitations, its erbium-doped fiber is co-doped with other materials such as zirconia and bismuth. This article demonstrates and compares the performance using three different fibers as the gain medium for zirconia-erbium-doped fibers (Zr-EDF), bismuth-erbium-doped fibers (Bi-EDF), and commercial silica-erbium-doped fibers (Si- EDF). The optical amplifier was configured with a double-pass amplification system, with a broadband mirror at the end of its configuration to allow double-pass operation in the system. The important parameters in amplifiers such as optical properties, optical amplification and noise values were also examined and discussed. All three fibers were 0.5 m long and entered with different input signals: 30 dBm for low input and 10 dBm for high input. Zr-EDF turned out to be the most relevant optical amplifier as it had the highest optical gain, longest transmission distance, highest average flatness gain with minimal jitter, and relevant noise figures suitable for the latest communication technology.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.135-136
• /
• 2006

Bismuth titanate ($Bi_4Ti_3O_{12}$, BIT) thin film has been studied intensively in the past decade due to its large remanent polarization, low crystallization temperature, and high Curie temperature. Substitution of various trivalent rare-earth cations (such as $La^{3+}$, $Nd^{3+}$, $Sm^{3+}$ and $Pr^{3+}$) in the BIT structure is known to improve its ferroelectric properties, such as remanent polarization and fatigue characteristics. Among them, neodymuim-substituted bismuth titanate, ((Bi, Nd)$_4Ti_3O_{12}$, BNT) has been receiving much attention due to its larger ferroelectricity. In this study, Ferroelectric $Bi_{3.3}Nd_{0.7}Ti_3O_{12}$ thin films were successfully fabricated by liquid delivery MOCVD process onto Pt(111)/Ti/$SiO_2$/Si(l00) substrates. Fabricated polycrystailine BNT thin films were found to be random orientations, which were confirmed by X-ray diffraction and scanning electron microscope analyses. The remanent polarization of these films increased with increase in annealing temperature. And the film also demonstrated fatigue-free behavior up to $10^{11}$ read/write switching cycles. These results indicate that the randomly oriented BNT thin film is a promising candidate among ferroelectric materials useful for lead-free nonvolatile ferroelectric random access memory applications.

• 한국세라믹학회지
• /
• 제28권5호
• /
• pp.353-358
• /
• 1991

Fine powders of the 2212 superconducting phase of bismuth system have been prepared directly from solution using ultrasonic spray pyrolysis. The fine superconducting powders produced by pyrolysis were characterized for the size, shape, and crystalline phase by SEM and XRD. The pyrolysis temperature, flow rate of the carrier gas, residence time of the droplets greatly influenced the size, shape, and crystalline phase. The optimum temperature and flow rate of the carrier gas for the preparation of fine powders of the 2212 superconduting phase were found to be 830$^{\circ}C$and 3ι/min, respectively.