• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.8
• /
• pp.969-976
• /
• 1999

This paper is concerned with the generation of a balancing trajectory for improving the walking performance. The balancing motion has been determined by solving a second -order differential equation. However, this method caused some difficulties in linearizing and approximating the equation and had restrictions on using various balancing trajectories. The proposed difficulties in linearizing and approximating the equation and had restrictions on using various balancing trajectories. The proposed method i this paper is based on the genetic algorithm for minimizing the motins of balancing joints, whose trajectories are generated by the fifth-order polynomial interpolation after planning leg trajectories. The real walking experiments are made on the biped robot IWR-III, developed by our Automatic Control Laboratory. The system has 8 degrees of freedom and the structure of three pitches in each leg, and one roll and one prismatic joint in the balancing joints. The experimental result shows the validity and applicability of the new proposed algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.85.2-85
• /
• 2002

If a biped humanoid robot walks stably on even and uneven planes like a human being, it should have a control system capable of compensating for moments generated by motions of its lower-limbs, upper-limbs and head. In this paper, a compensatory motion control method is described for the stability of biped humanoid robots. This control method calculates the combined motion of the trunk and the waist that cancels the generated moments by using an iteration algorithm. During the biped walking, the combined motion is employed only for stability while the motion of the lower-limbs is used only for locomotion. This method is useful for not only a steady walking but also a transient walking. The e...

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.3 s.168
• /
• pp.38-45
• /
• 2005

In this paper, a bird type biped robot for entertainment controlled by R/C servo motors, is built using the embedded RTOS (Real Time Operating System). ${\mu}C/OS-II$ V2.00 is used fur RTOS and the board 80C196KC for main CPU. A control algorithm of R/C servo motors is proposed on ${\mu}C/OS-II's$ preemptive and deterministic property without any extra PWM module. The realized biped robot has 19DOF, that is, 12DOF for both legs, 6DOF for both arms and 1DOF for neck. To verify the proper walking process, ZMP(Zero Moment Point) theory is applied and the simulation has been done by ADAMS.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.301-303
• /
• 2001

This paper deals with the biped robot gait on changing the initial postures. Gait of a biped robot depends on the constraints of mechanical kinematics and initial posture. Also biped robot's dynamic walking stability is investigated by ZMP(Zero Moment Point). The path trajectory. with the knee joint bent like a human, is generated and applied with the above considerations. To decrease trajectory tracking error, in this paper, a new initial posture similar to bird's case is proposed and realized with the real robot.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.998-1001
• /
• 2003

In this paper, a entertainment biped robot controlled by R/C servo motors is built using the embedded RTOS (Real Time Operating System). uC/OS-II V2.00 is used for RTOS and control algorithm of R/C servo motors is proposed based on uC/OS-II's preemptive and deterministic property without any extra PWM module. The realized biped robot has 19 DOF, and a board 80C196KC as main CPU. To verify the proper walking process, ZMP(Zero Moment Point) theory is applied and ADAMS is used for simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.959-964
• /
• 1992

This study treats the method for kinematic modeling of the biped walking robot, for synthesizing various gait trajectories, and for calculating adequate values of the joint torque inside the stable region. To synthesize various and anthropomorphic walking easily, the gait trajectory is specified by a set of ten walking prameters, and the trunk motion equation is derived by the zero moment point and the gait trajectory. By distributing ground reaction force and moment reduced at the zero moment point to the both feet, the joint torque equation can be derived readily, and according to this equation, the joint torque to stable walking can be computed.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.105.2-105
• /
• 2002

$\textbullet$ Statically stable walk with COG(center of gravity) $\textbullet$ Dynamically stable walk with ZMP(zero moment point) $\textbullet$ Dynamically adaptational stable walk with FRI(foot ratation indicator) $\textbullet$ Simplified inverted pendulum model approach $\textbullet$ Analysis posture of biped's foot as passive joint $\textbullet$ Stability compensation method of FRI against falling down $\textbullet$ Simulation of ZMP and FRI to real biped robot IWR-III

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.11
• /
• pp.2266-2268
• /
• 2009

In this paper, a simple method of angle velocity estimation is presented for a passive dynamic biped robot. The estimation problem is not an easy task because its dynamic model is a hybrid system involved with an impact condition. Instead of designing a complex observer for hybrid systems we simply utilize the impact condition to reset the initial condition of the high-pass filter when the non-support leg hits the slope. The approach has been verified by simulation results.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.8
• /
• pp.135-143
• /
• 2003

This paper presents the impact minimization of a biped robot by using genetic algorithm. In case we want to accomplish the designed plan under the special environments, a robot will be required to have walking capability and patterns with legs, which are in a similar manner as the gaits of insects, dogs and human beings. In order to walk more effectively, studies of mobile robot movement are needed. To generate optimal motion for a biped robot, we employ genetic algorithm. Genetic algorithm is searching for technology that can look for solution from the whole district, and it is possible to search optimal solution from a fitness function that needs not to solve differential equation. In this paper, we generate trajectories of gait and trunk motion by using genetic algorithm. Using genetic algorithm not only on gait trajectory but also on trunk motion trajectory, we can obtain the smoothly stable motion of robot that has the least impact during the walk. All of the suggested motions of biped robot are investigated by simulations and verified through the real implementation.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.7
• /
• pp.43-50
• /
• 2002

This paper presents the new gait implementation of a biped robot with smooth walking using 3-dimensional continuous trunk motion and kick action of ankle joints. Trajectory generation ova trunk is performed not on a unit gait but on a whole walking interval. In applying kick action such as heel-touch or toe-off, varying coordinate system was employed for the simplification of the kinematic analysis. Desired ZMP (zero moment point) is also changed to implement the efficient kick action. As a result, balancing motion of the proposed gait was much more decreased than that of conventional one. Moreover, robot\\`s walking behavior is very smooth, natural and similar to the pace of a human. The walking experiment system is composed of eight AC servo motors and a DSP controller. The walking simulation and the experimental results are shown using the proposed new walking algorithm.