• Journal of Biomedical Engineering Research
• /
• v.19 no.3
• /
• pp.251-260
• /
• 1998

The Holter monitoring system is a widely used noninvasive diagnostic tool for ambulatory patient who may be at risk from latent life-threatening cardiac abnormalities. In this paper, we design a high performance intelligent holter monitoring system which is characterized by the small-sized and the low-power consumption. The system hardware consists of one-chip microcontroller(68HC11E9), ECG preprocessing circuit, and flash memory card. ECG preprocessing circuit is made of ECG preamplifier with gain of 250, 500 and 1000, the bandpass filter with bandwidth of 0.05-100Hz, the auto-balancing circuit and the saturation-calibrating circuit to eliminate baseline wandering, ECG signal sampled at 240 samples/sec is converted to the digital signal. We use a linear recursive filter and preprocessing algorithm to detect the ECG parameters which are QRS complex, and Q-R-T points, ST-level, HR, QT interval. The long-term acquired ECG signals and diagnostic parameters are compressed by the MFan(Modified Fan) and the delta modulation method. To easily interface with the PC based analyzer program which is operated in DOS and Windows, the compressed data, that are compatible to FFS(flash file system) format, are stored at the flash memory card with SBF(symmetric block format).

• Journal of Digital Contents Society
• /
• v.16 no.1
• /
• pp.63-70
• /
• 2015

In this paper, we estimate the life cycle from acceleration life test about the hard disk of disk array of image storage of PACS. Webuil distribution was selected by the Anderson-Darling goodness-of-fit test with data of down time at $50^{\circ}C$ and $60^{\circ}C$. The equality test of shape parameter and scale parameter was conducted, so that the probability distribution estimated from data of down time at $50^{\circ}C$ and $60^{\circ}C$ was not statistically significant. The shape parameter was 1.0409, The characteristic life was 24603.5 hours at normal user condition($30^{\circ}C$) by the analysis of weibull-arrhenius modeling which included the acceleration factor of temperature, and The activation energy was 0.5011 eV through arrhenius modeling. The failure analysis of the failure samples of acceleration test and the samples of market return was conducted, so that the share percentage of failure mode was detail difference but the rank of share percentage was almost same. This study suggest the test procedure of acceleration test of hard disk drive in PACS using environment, and help the life estimation at manufacture and use.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.11
• /
• pp.67-76
• /
• 2011

This paper describes the development of interactive visualization techniques and a program that allow us to visualize the structure of the volume data and interactively select and visualize the isosurface components using contour tree. The main characteristic of this technique is to provide an algorithm that draws the contour tree in 2D plane in a way that users easily understand the tree, and to provide an algorithm that can efficiently extract an isosurface component utilizing GPU's parallel architecture. The main characteristic of the program we developed through implementing the algorithms is to provide us with an interactive user interface based on the contour tree for extracting an isosurface component and visualization that integrates with previous isosurface and volume rendering techniques. To show the excelland vof our methods, we applied 3D biomedical volume data to our algorithms. The results show that we could interactively select the isosurface components that represent a polypeptide chain, a ventricle and a femur respectively using the user interface based on our contour tree layout method, and extract the isosurface components with 3x-4x higher speed compared to previous methods.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.4
• /
• pp.303-317
• /
• 2020

Extracorporeal Shock Wave Therapy (ESWT) is an innovative treatment in chronic musculoskeletal pain management and cardiovascular diseases. In this study, we surveyed the acoustic shock wave outputs from the domestically used focal type ESWT devices. The survey data were collected through 30 technical documents registered to the Ministry of Food and Drug Safety (MFDS), Rep. Korea. The results show that the focusing geometry varies largely, 5 mm to 65 mm in the focal length, 3 mm to 30 mm in focal width, and 4 mm to 108 mm in focal depth. The maximum positive pressure (P+) ranges from 7 MPa to 280 MPa, the focal Energy Flux Density (EFD) from 0.0035 mJ/㎟ to 35 mJ/㎟, and the energy per pulse (E) from 0.737 mJ to 80.86 mJ. All domestic PE-type (five) and one EM-type domestic devices included in the analysis of the correlation between P+ and EFD are shown to be far beyond the usual ranges and do not comply with expected correlation so that the reliability of their data was suspected. For the suspected, post-performance tests are required by a recognized testing agency. MFDS guidelines need to be revised so that the pass criteria for the shock wave acoustic outputs can be based on the clinical tests for indications.

• Journal of the Korea Convergence Society
• /
• v.8 no.4
• /
• pp.131-137
• /
• 2017

In the present study, we developed the 4D CT data generation program from CAD-based models. To evaluate the developed program, a CAD-based respiratory motion phantom was designed using CAD software, and converted into 4D CT dataset, which include 10 phases of 3D CTs. The generated 4D CT dataset was evaluated its effectiveness and accuracy through the implementation in radiation therapy planning system (RTPS). Consequently, the results show that the generated 4D CT dataset can be successfully implemented in RTPS, and targets in all phases of 4D CT dataset were moved well according to the user parameters (10 mm) with its stationarily volume (8.8 cc). The developed program, unlike real 4D CT scanner, due to the its ability to make a gold-standard dataset without any artifacts constructed by modality's movements, we believe that this program will be used when the motion effect is important, such as 4D radiation treatment planning and 4D radiation imaging.

• Journal of Biomedical Engineering Research
• /
• v.21 no.3 s.61
• /
• pp.239-246
• /
• 2000

In this paper. we propose a semi-automatic segmentation algorithm to extract organ in 3D medical data by using a manually segmentation result in a sing1e slice. Generally region glowing based tracking method consists of 3 steps object projection. seed extraction and boundary decision by region growing. But because the boundary between organs in medical data is vague, improper seeds make the boundary dig into the organ or extend to the false region. In the proposed algorithm seeds are carefully extracted to find suitable boundaries between organs after region growing. And the jagged boundary at low gradient region after region growing is corrected by post-processing using Fourier descriptor. Also two-path tracking make it possible to catch up newly appeared areas. The proposed algorithm provides satisfactory results in segmenting 1 mm distance kidneys from X-rav CT body image set of 82 slices.

• Journal of Biomedical Engineering Research
• /
• v.15 no.3
• /
• pp.317-324
• /
• 1994

This paper proposed a new method in the implementation of ISDN (integrated services digital network) LAPD (link access procedure on the D-channel) and LAPB (link access procedure on the B-channel) protocols. The proposed method in this paper implement ISDW LAPD protocol through multi-tasking operating system and adopt a kernel part that is changed operating system to target board. The features of implemented system are (1) the para.llel processing of the events generated at each layer, as follows (2) the supporting necessary timers for the implementation of ISDW LAPD protocol from the kernel part by using software, (3) the recommanded SAP (Service Access Point) from CCITT was composed by using port function in the operating system. With the proposed method, the protocols of ISDH layerl, layer2 and layer3 (call control) were implemented by using the kernel part and related tests were carried out by connecting the ISDH terminal simulator to ISDN S-interface system using the ISDN LAPD protocol The results showed that ISDW S-interface terminals could be discriminated by TEI (Terminal Equipment Identifier) assignment in layer 2 (LAPD) and the message transmission of layer 3 was verified by establishing the multi-frame transmission and then through the path established by the LAPD protocol, a user data was tranfered and received on B-channel with LAPB protocol Thererfore, as new efficient ISDN S-interface environment was implemented in the thesis, it was verified that the implemented system can be utilized by connecting ISDW in the future to transfer a medical image data.

• Journal of Biomedical Engineering Research
• /
• v.20 no.1
• /
• pp.107-113
• /
• 1999

The purpose of this study was to develop a miniature imaging gamma probe with high performance that can detect small or residual tumors after surgery. Gamma probe detector system consists of NaI(Tl) scintillator, position sensitive photomultiplier tube (PSPMT), and collimator. PSPMT was optically coupled with 6.5 mm thick, 7.62 cm diameter of NaI(Tl) crystal and supplied with -1000V for high voltage. Parallel hexagonal hole collimator was manufactured for characteristics of 40-mm hole length, 1.3-mm hole diameter, and 0.22 mm septal thickness. Electronics consist of position and trigger signal readout systems. Position signals were obtained with summing, subtracting, and dividing circuit using preamplifer and amplifier. Trigger signals were obtained using summing amplifier, constant fraction discriminator, and gate and delay generator module with preamplifer. Data acquisition and processing were performed by Gamma-PF interface board inserted into pentium PC and PIP software. For imaging studies, flood and slit mask images were acquired using a point source. Two hole phantom images were also acquired with collimator. Intrinsic and system spatial resolutions were measured as 3.97 mm and 5.97 mm, respectively. In conclusion, Miniature gamma probe images based on the PSPMT showed good image quality, we conclude that the miniature imaging gamma probe was successfully developed and good image data were obtained. However, further studies will be required to optimize imaging characteristics.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.8
• /
• pp.265-272
• /
• 2017

The purpose of this study was to investigate the relationship between the dental screening and health care behaviors for 17810 residents of Gyeongsangnam-do province using the data of the community health survey conducted in 2014. The SPSS ver. 23.0 statistical program was used. The residents were male, aged 30-49 years, city dwellers, their final education level was college or higher, their income was more than 600 KRW monthly, and they had a lot of experience of dental screening. In terms of oral health care, scaling, brushing after eating, brushing before going to bed, and brushing more than 4 times a day were found in the dental screening. In terms of health care, the levels of drinking, without chronic diseases, self-rated health and self-rated oral health were high when the residents had experience of dental screening(p<0.001). Therefore, it is necessary to establish a plan to improve the oral examination rate, because the level of dental screening is related to the levels of subjective health awareness and chronic diseases and lifestyle, and it is necessary to develop an education program to improve the awareness of the need for regular dental screening.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.3882-3888
• /
• 2015

The present study was conducted to assess the relationship between obesity and abdominal obesity and Parathyroid hormone (PTH) in adults aged 50 or older (n=3,305) using 2011 Korean National Health and Nutrition Examination Survey (KNHANES) data, which represents national data in Korea. Key study results were as follows: First, the PTH levels increased significantly with an increase in Body mass index (BMI) (p=0.003), shown by sIAD levels after adjusted the variables that affect sIAD levels (age, gender, SBP, DBP, and 25(OH)D). These were $66.25{\pm}0.89ng/dL$ for Normal weight (BMI, < $23.0kg/m^2$), $67.83{\pm}1.07 ng/dL$ for Overweight (BMI, $23.0-24.9kg/m^2$), $70.71{\pm}0.94ng/dL$ for Obesity (BMI,${\geq}25.0kg/m^2$). Second, the PTH level of abdominal obesity group ($69.30{\pm}0.80ng/dL$) was significantly higher (p=0.017) than non-abdominal obesity group ($66.63{\pm}0.74ng/dL$). In conclusion, BMI and waist measurement are positively associated with the PTH levels in Korean adults.