• 제목/요약/키워드: Biomechanical technique

검색결과 103건 처리시간 0.021초

동작분석기법을 이용한 조향동작에 대한 팔의 생체역학적 특성분석 (Biomechanical Analysis of Arm Motion during Steering Using Motion Analysis Technique)

  • 김영환;탁태오
    • 대한기계학회논문집A
    • /
    • 제35권11호
    • /
    • pp.1391-1398
    • /
    • 2011
  • 본 논문은 장비의 동작분석기법을 이용하여 운전자가 핸들을 돌릴 때 팔의 관절 운동에 대한 생체역학적 해석을 수행하였다. 모형 운전석에서 운전자가 핸들을 돌릴 때 모션 캡쳐(motion capture) 시스템을 이용하여 팔의 3차원 운동궤적을 구하고, 이 결과를 이용하여 팔의 근-골격계 모델에 대한 역기구학 해석과 역동역학 해석을 수행함으로써 팔 관절의 변위와 관절 토크의 크기를 계산하였다. 각 관절의 회전 운동은 동시에 복합적으로 발생하며, 관절 운동의 크기의 관점에서 팔꿈치 관절의 회내-회외, 어깨 관절의 내전-외전, 굴곡-신전, 손목 관절의 굴곡-신전 등이 주요한 운동임을 확인할 수 있었다. 모형 운전석의 운전 자세, 핸들의 각도 및 좌석에 대한 상대적 위치와 관련된 설계변수에 대한 관절운동의 민감도 해석을 통하여 운전 자세와 핸들의 위치가 조향 동작에 미치는 영향을 정량적으로 분석하였다.

8주간의 체중을 이용한 저항운동 시 전신진동 유·무에 따른 노인 여성하지의 발바닥쪽굽힘근의 생체역학적 특성 변화 (Changes in the Biomechanical Properties of Ankle Plantarflexors Following 8-week Resistance Training with or without Whole-Body Vibration in Older Women)

  • 한보람;이대연;정시우;이해동
    • 한국운동역학회지
    • /
    • 제24권4호
    • /
    • pp.399-415
    • /
    • 2014
  • The aim of this study was to investigate the effect of resistance training with and without whole-body vibration(WBV) on the biomechanical properties of the plantarflexor in the elderly women (>60 yrs., n=35). Thirty-five volunteers were randomly assigned to a resistance training with WBV group (RVT, n=14), a resistance training without WBV (RT, n=11), and a non-training control group (CON, n=10). The RVT and the RT groups participated in the training sessions three times a week for 8 weeks, followed by a 4-week detraining period. The CON group was instructed to refrain from any type of resistance training. To assess strength and activation of the plantarflexor muscles, maximum isometric ankle plantarflexion torque and muscle activation of the triceps surae muscles were measured using dynamometry, twitch interpolation technique and electromyography at four different ankle joint angles. Also, the lower extremity function was assessed by vertical jumping. The measurements were performed prior to, 2 and 8 weeks after the training and after a 4-week detraining period. Following the 8-week training sessions, an increase in the isometric plantarflexion strength was found to be greater for the RVT compared with the RT group (p<.05). Muscle inhibition was significantly decreased after training than before training only for the RVT (p<.05). Following the detraining period, a decrease in isometric plantarflexors strength and a increases in muscle inhibition were significantly less in the RVT compared with the RT group. In conclusion, the exercise with WBV is a feasible training modality for the elderly and seems to have a boosting effect when used with conventional resistance training.

하악골 과두하부 골절 실험모델에서 견고정을 위한 플레이트 고정방법 연구 (Study of the Plating Methods in the Experimental Model of Mandibular Subcondyle Fracture)

  • 이원;강동희
    • 대한두개안면성형외과학회지
    • /
    • 제12권1호
    • /
    • pp.12-16
    • /
    • 2011
  • Purpose: This study examined the biomechanical stability of four different plating techniques in the experimental model of mandibular subcondyle fracture. Methods: Twenty standardized bovine tibia bone samples ($7{\times}1.5{\times}1.0cm$) were used for this study. Each of the four sets of tibia bone was cut to mimic a perpendicular subcondyle fracture in the center area. The osteotomized tibia bone was fixed using one of four different fixation groups (A,B,C,D). The fixation systems included single 2.0 mm 4 hole mini adaption plate (A), single 2.0 mm 4 hole dynamic compression miniplate (B), double fixation with 2.0 mm 4 hole mini adaption plate (C), double fixation with a 2.0 mm 4 hole mini adaption plate and 2.0 mm 4 hole dynamic compression miniplate (D). A bending force was applied to the experimental model using a pressure machine (858 table top system, $MTS^{(R)}$) until failure occurred. The load for permanent deformation, maximum load of failure were measured in the load displacement curve with the chart recorder. Results: Double fixation with a 2.0 mm 4 hole mini adaption plate and a 2.0 mm 4 hole dynamic compression miniplate (D) applied to the anterior and posterior regions of the subcondyle experimental model showed the highest load to failure. Conclusion: From this study, double fixation with an adaption plate and dynamic compression miniplate fixation technique produced the greatest biomechanical stability. This technique may be considered a useful means of fixation to reduce the postoperative internal maxillary fixation period and achieve early mobility of the jaw.

Barbed sutures versus conventional tenorrhaphy in flexor tendon repair: An ex vivo biomechanical analysis

  • Colak, Ozlem;Kankaya, Yuksel;Sungur, Nezih;Ozer, Kadri;Gursoy, Koray;Serbetci, Kemal;Kocer, Ugur
    • Archives of Plastic Surgery
    • /
    • 제46권3호
    • /
    • pp.228-234
    • /
    • 2019
  • Background The management of flexor tendon injuries has evolved in recent years through industrial improvements in suture materials, refinements of repair methods, and early rehabilitation protocols. However, there is no consensus on the ideal suture material and technique. This study was conducted to compare the tensile strength, repair time, and characteristics of 4-strand cruciate, modified Kessler, and 4-strand horizontal intrafiber barbed sutures for flexor tenorrhaphy with a 12-mm suture purchase length in an animal model. Methods The right third deep flexors of 60 adult Leghorn chicken feet were isolated and repaired with a 12-mm suture purchase length. The tendons were randomly assigned to three groups of equal number (n=20 each). Groups 1 and 2 received 4-strand cruciate and modified Kessler repair with conventional suture materials, respectively. A 4-strand horizontal intrafiber barbed suture technique was used in group 3. The repaired tendons were biomechanically tested for tensile strength, 2-mm gap resistance, and mode of failure. Repair times were also recorded. Results The maximum tensile strength until failure was $44.6{\pm}4.3N$ in group 1, $35.7{\pm}5.2N$ in group 2, and $56.7{\pm}17.3N$ in group 3. The barbed sutures were superior to the other sutures in terms of the load needed for 2-mm gap formation (P<0.05). Furthermore, the barbed sutures showed the shortest repair time (P<0.05). Conclusions This study found that 4-strand horizontal intrafiber barbed suture repair with a 12-mm purchase length in a chicken flexor tendon injury model showed promising biomechanical properties and took less time to perform than other options.

Combination of Anterior and Posterior Subcutaneous Internal Fixation for Unstable Pelvic Ring Injuries: The "Hula Hoop Technique"

  • Balbachevsky, Daniel;Pires, Robinson Esteves;Sabongi, Rodrigo Guerra;Lins, Theophilo Asfora;Carvalho, Geiser de Souza;Fernandes, Helio Jorge Alvachian;Reis, Fernando Baldy dos
    • Journal of Trauma and Injury
    • /
    • 제32권1호
    • /
    • pp.51-59
    • /
    • 2019
  • Unstable pelvic ring lesions are usually treated with internal fixation. In patients presenting clinical instability or soft tissue complication risk, external fixation is a safe treatment option. However, pin tract infection, insufficient biomechanical properties, difficulty sitting and changing decubitus are important drawbacks related to the treatment. The present study reports the association of anterior and posterior subcutaneous internal fixation by applying spine-designed implants on the pelvic ring disruption: supra-acetabular pedicle screws with an interconnecting rod (Infix), plus posterior transiliac fixation with the same system, which the authors have named the "Hula Hoop Technique".

Posterior Atlantoaxial Fixation with a Combination of Pedicle Screws and a Laminar Screw in the Axis for a Unilateral High-riding Vertebral Artery

  • Kim, Sei-Yoon;Jang, Jee-Soo;Lee, Sang-Ho
    • Journal of Korean Neurosurgical Society
    • /
    • 제41권2호
    • /
    • pp.141-144
    • /
    • 2007
  • A vertebral arte [VA] injury presents a difficult problem in atlantoaxial fixation. Recent technical reports described posterior C2 fixation using bilateral, crossing C2 laminar screws. The translaminar screw technique has the advantages of producing little risk of VA injury and the unconstrained screw placement. In addition, biomechanical studies have demonstrated the potential of the translaminar screw technique to provide a firmer construct that is equivalent to methods currently used. We report the successful treatment of C1-2 instability with a left-side high-riding VA. Because of the potential risk of VA injury, we performed a posterior C1-2 fixation with a combination of pedicle screws and a laminar screw in C2. We first placed bilateral C1 lateral mass screws and a right-side C2 pedicle screw. However, placement of the left- side C2 pedicle screw was technically difficult due to a narrow isthmus and pedicle. A laminar screw was inserted instead and authors believe that this posterior C1-C2 fixation with a combination of pedicle screws and a laminar screw in C2 can be a useful alternative technique for the treatment of C1-C2 instability in the presence of a unilateral high-riding VA.

이중 다발 전방십자인대 재건술의 임상적 결과 (Clinical Review in Double-Bundle Anterior Cruciate Ligament Reconstruction)

  • 이주홍
    • 대한관절경학회지
    • /
    • 제13권2호
    • /
    • pp.111-114
    • /
    • 2009
  • 단일 다발 십자인대 재건술의 임상적 결과를 보다 향상하고자 제안된 이중 다발 전방십자인대 재건술은 해부학적, 생역학적, 생물학적, 운동역학적으로 많은 이론적 장점이 있고 이에 따른 임상적 측면에서의 결과 향상이 기대되지만 이를 입증할 만한 충분한 관찰 기간을 가진 임상적 연구들이 매우 부족한 실정이다. 따라서 저자는 이중 다발 전방십자인대 재건술에 관련되어 최근까지 발표된 문헌을 통해 임상적 결과를 분석하고 이에 제기된 문제점을 살펴보고자 한다.

  • PDF

압축력을 병용한 하악골 신장술 (MANDIBULAR DISTRACTION OSTEOGENESIS WITH COMPRESSION FORCE - BONE DENSITY, HISTOLOGICAL FINDINGS AND TMJ RESPONSE)

  • 황영섭;허준;김욱규;박성진;황대석;김용덕;정인교;김규천
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • 제28권6호
    • /
    • pp.531-548
    • /
    • 2006
  • The purpose of this study was to investigate the biomechanical, histologic findings of distracted regenerate and TMJ response in modified distraction osteogenesis (DO) technique combined with compression force as biomechanical stimulation method which has been suggested in 2002, and developed thereafter by authors. This study was performed with two experiments. First experiment was designed to explore the optimal ratio of compression force versus distraction force for the new DO technique. Second experiment was planned to evaluate the reaction of TMJ tissue, especially condyle, disc after application of the DO technique with compression force. Total 52 New Zealand adult male-rabbits with 3.0kg body weight were used for the study. For the first study, 30 adult male-rabbits underwent osteotomy at one side of mandibular body and a external distraction device was applied on each rabbit with same manner. In the control group of 10 rabbits, final 8 mm of distraction with 1 mm rate per day was done with conventional DO technique after 5 latency days. For the experimental group of 20 rabbits, a compression force with 1 mm rate per day was added to the distracted mandible on 3-latency day after over-distraction (over-lengthening). As the amount of the rate of compression versus distraction, experimental subgroup I (10 rabbits) was set up as 2 mm compression versus 10 mm distraction (1/5) and experimental subgroup II (10 rabbits) was set up as 3 mm compression versus 11 mm distraction (about 1/3). All 30 rabbits were set up to obtain final 8 mm distraction and sacrificed on postoperative 55 day to analysis on biomechanical, and histologic findings of the bone regenerates. For second study, 22 adult male-rabbits were used to evaluate TMJ response after the DO method application with compression force. In the control group, 10 rabbits was used to be performed with conventional DO method, on the other hand, in a experimental group of 10 rabbits, 10 mm distraction with 2 mm compression (1/5 ratio) was done. The remaining 2 rabbits served as the normal control group. Histomorphologic examinations on both condyle, histological studies on condyle, disc were done at 1, 2, 3, 4, 7 weeks after distraction force application. The results were as follows: 1. On the bone density findings, the experimental group II (force ratio - 1/3) showed higher bone density than the other experimental group (force ratio - 1/5) and control group (control group - $0,2906\;g/cm^2$, experimental group I - $0.2961\;g/cm^2$, experimental group II - $0.3328\;g/cm^2$). 2. In the histologic findings, more rapid bone maturation like as wide lamellar bone site, more trabeculae formation was observed in two experimental groups compared to the conventional DO control group. 3. In morphologic findings of condyle, there were no differences of size and architecture in the condyle in the control and experimental groups. 4. In histologic findings of condyles, there were thicker fiberous and proliferative layers in experimental group than those of control group until 2 weeks after distraction with compression force. But, no differences were seen between two groups on 3, 4, 7 weeks after compression. 5. In histologic findings of disc, more collagen contents in extracellular matrix, more regular fiber bundles, and less elastin fibers were seen in experimental group than control group until 2 weeks after distraction with compression. But, no differences were seen between two groups on 3, 4, 7 weeks after distraction with compression. From this study, we could identify that the new distraction osteogenesis technique with compression stimulation might improve the quality of bone regeneration. The no remarkable differences on TMJ response between control and experimental groups were seen and TMJ tissues were recovered similarly to normal TMJ condition after 3 weeks.

관절경적 회전근 개 봉합술: 이열 봉합술 및 교량형 봉합술식 (Arthroscopic Rotator Cuff Repair: Double Rows & Suture Bridge Technique)

  • 신상진
    • Clinics in Shoulder and Elbow
    • /
    • 제11권2호
    • /
    • pp.82-89
    • /
    • 2008
  • 이상적인 회전근 개 봉합술은 봉합 초기 높은 고정 강도로 봉합 부위 건-골간 간격 형성을 최소화시키며, 재활 과정 중 발생하는 반복적인 부하에도 견디는 기계적 강도를 나타내어 궁극적으로 건-골 조직의 생물학적 치유를 얻을 수 있는 방법이다. 현재 사용되는 회전근 개 봉합술 중 교량형 봉합술식은 회전근 개 부착 부위를 해부학적으로 복원할 수 있으며, 건-골간 압력 접촉 면적을 증가시키고, 방사형의 봉합 형태를 통하여 회전근 개 전체에 균등하게 압력을 분포함으로 부하를 분산시키며 생물학적 치유를 향상시킨다. 또한 건-골간 간격 형성을 최소화하며 전단 및 회전 응력에 저항력을 주어 정상과 동일한 해부학적 복원력으로 빠른 재활 운동을 가능하게 한다. 그러나 비록 교량형 봉합술식이 다른 술식에 비해 우수한 생역학적 특성을 나타내도 임상적으로 더 좋은 결과를 초래한다는 증거는 없으며, 이열 봉합술과는 비슷한 재파열율이 보고되고 있다. 회전근 개봉합술의 선택은 회전근 개 파열 크기, 파열 양상 및 건의 상태 등을 고려하여 적절하게 선택하여야 할 것으로 사료된다.

관절경적 회전근 개 봉합술: 일열 봉합 수기 (Arthroscopic Rotator Cuff Repair: Single Row Technique)

  • 박형빈
    • Clinics in Shoulder and Elbow
    • /
    • 제10권2호
    • /
    • pp.155-159
    • /
    • 2007
  • 관절경적 일열 봉합법은 잘 정립된 회전근 개 봉합술로 우수한 임상성적을 보여왔다. 하지만, 수술 후 재파열의 빈도가 높은 것으로 알려져 있어 다양한 방법들이 술 후 재파열을 줄이기 위하여 시도되어왔다. 일부 연구들에서는 해부학적 회전근 개 부착부를 재건하면 봉합한 회전근 개의 치유 및 초기 역학적 강도를 증가시킬 수 있을 것이라고 보고하였고, 이열 봉합법이 해부학적 회전근 개 부착부 재건과 봉합부의 강도를 증가 시키고, 간격형성을 감소 시킬 목적으로 소개되었다. 하지만, 재부착된 회전근 개 건의 장력, 봉합된 건의 혈관 형성 등의 생물학적 치유환경이 일렬 봉합법에 비하여 우수함이 아직 입증되지 않았고 수술 후 기능적 개선도 측면에서도 두 봉합술간 차이가 없으므로, 수술 수기가 상대적으로 쉽고, 요구되는 기구 및 내고정물의 추가적 비용이 적어 경제적인 측면에 장점이 있는 일렬 봉합법은 여전히 추천되는 수술수기이다.