• Korean Journal of Soil Science and Fertilizer
• /
• v.47 no.6
• /
• pp.398-405
• /
• 2014

Salt accumulation at soil surface is one of the most detrimental factors for crop production in reclaimed tidal land. This study was conducted to investigate the effect of capillary barriers beneath the soil surface on dynamics of soil salts at coarse-textured reclaimed tidal land. A field experiment was conducted at Saemangeum reclaimed tidal land for two years (2012-2013). Capillary barriers ($3.5{\times}12m$) were treated with crushed-stone, oyster shell waste, coal briquette ash, coal bottom ash, rice hull and woodchip at 40-60 cm depth from soil surface. Silage corn (Zea mays) was cultivated during the experimental period and soil salinity was monitored periodically. Soil salinity was significantly reduced with capillary barrier compared to that of control. Oyster shell waste was one of the most effective capillary barrier materials to control soil salinity at Saemangeum reclaimed tidal land. At the first growing season capillary barrier did not influence on corn growth regardless of types of the material, but plant biomass and withering rate of corn were significantly improved with capillary barrier at the second growing season. The results of this study showed that capillary barrier was effective on the control of soil salinity and improvement of corn growth, which indicated that capillary barrier treatment can be considered one of the best management practices for stable crop production at Saemangeum reclaimed tidal land.

• Korean Journal of Environmental Biology
• /
• v.29 no.4
• /
• pp.362-372
• /
• 2011

The relationships among total epiphytes, algal epiphytes and eelgrass ($Zostera$ $marina$ L.) were studied at eelgrass medows from July, 1998 to July, 1999 in Yulim-ri, Yeosu, Korea. Epiphytic diatoms on eelgrass leaves were observed from July to December 1998. From the results of this study, we inferred the following three (3) conclusions : 1) As eelgrass grew older, biomass of epiphytes increased, according to relationships between the leaf length and area of eelgrass and biomass (DW, AFDW and Chl. $a$) of epiphytes. 2) According to the ratio of dry weight, ash-free dry weight and Chlorophyll of epiphytes, the algae with calcareous or siliceous skeletons, such as coralline algae or diatoms, were dominated in the epitphytic algae community. 3) The autotrophic index (AI) calculated from AFDW and Chl. $a$ of epiphytes varied from 151 to 375. However, the period of autotrophic community was shorter than heterotrophic community and the value of AI was high. From these results, we inferred that heterotrophic community, including detritus or microorganisms were dominated in the most of research period.

• Environmental Analysis Health and Toxicology
• /
• v.29
• /
• pp.15.1-15.7
• /
• 2014

Objectives This paper tried to review a recent research trend for the environmental exposure of engineered nanomaterials (ENMs) and its removal efficiency in the nanowaste treatment plants. Methods The studies on the predicted environmental concentrations (PEC) of ENMs obtained by exposure modeling and treatment (or removal) efficiency in nanowaste treatment facilities, such as wastewater treatment plant (WTP) and waste incineration plant (WIP) were investigated. The studies on the landfill of nanowastes also were investigated. Results The Swiss Federal Laboratories for Materials Science and Technology group has led the way in developing methods for estimating ENM production and emissions. The PEC values are available for surface water, wastewater treatment plant effluents, biosolids, sediments, soils, and air. Based on the PEC modeling, the major routes for the environmental exposure of the ENMs were found as WTP effluents/sludge. The ENMs entered in the WTP were 90-99% removed and accumulated in the activated sludge and sludge cake. Additionally, the waste ash released from the WIP contain ENMs. Ultimately, landfills are the likely final destination of the disposed sludge or discarded ENMs products. Conclusions Although the removal efficiency of the ENMs using nanowaste treatment facilities is acceptable, the ENMs were accumulated on the sludge and then finally moved to the landfill. Therefore, the monitoring for the ENMs in the environment where the WTP effluent is discharged or biomass disposed is required to increase our knowledge on the fate and transport of the ENMs and to prevent the unintentional exposure (release) in the environment.

• Microbiology and Biotechnology Letters
• /
• v.25 no.3
• /
• pp.235-239
• /
• 1997

Chlorococcum littorale has been grown in high $CO_2$ concentrations to utilize $CO_2$ gas in the polluted air. The effect of incident light intensity on the specific growth rate is expressed by a photoinhibition model, showing half- saturation constant, $K_0\;as\;8\;(W/m^2)$ and inhibition constant, Ki as 35 $(W/m^2)$. The maximum specific growth rate was also estimated as 0.095 (1/day) under this condition. This strain maintained the optimum growth rate in 20% of $CO_2$ gas but 50% of input $CO_2$ gas is the maximum concentration considering the economical efficiency. The maximum Specific $CO_2$ consumption rate, $qCO_2$ was measured as 17.48 (mg $CO_2/g$ dry wt./day) in batch cultivation, 11.2 (mg $CO_2/g$ dry wt./day) in fed-batch cultivation and 10.87 (mg $CO_2/g$ dry wt./day) at 0.065 (1/day) of dilution rate in continuous cultivation. The chemical composition of the biomass obtained from this process showed 32.5% of protein, 27.5% of lipid, 16.5% of carbohydrate and ash 11.7%.

• Journal of Biosystems Engineering
• /
• v.33 no.4
• /
• pp.248-252
• /
• 2008

An experiment was conducted in order to investigate gasification characteristics of rice husks in a fixed bed, which was a pre-step to design a continuous gasification system. Two air supply levels for gasification were chosen and their effects on the producer gas amount and producer gas composition were discussed. The main components of the producer gas were CO, $CO_2$, $O_2$, $H_2$ and THC (Total HydroCarbon). As airflow rate decreased, more producer gas was produced. The peak amount of CO, $H_2$ and THC were 28%, 7.5% and 0.68% in volume when constant airflow rate of $3.36\;m^3/s$ was used in the batch operation. About 4.5 kg of ash (9%) and condensed water including tars of 6 kg (11%) were produced from 50 kg rice husks in the gasification. Excluding the byproducts, all rice husks seemed to be transformed into producer gas. This gasification study was conducted prior to developing a continuous gasification system for biomass including agricultural byproducts.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.6
• /
• pp.671-681
• /
• 2017

Oil palm trunk (OPT) is a potential source of biomass for the production of biopellet. In the present research, biopellet were prepared from the meristem part of 25 years old OPT with various percentages of its bark (0, 10, and 30%). The highest biopellet durability was found for biopellet produced at $130^{\circ}C$ of pelletizing temperature with 30% bark content. Scanning electron microscopy (SEM) of biopellet showed the weak of particle bonding due to the low pelletizing pressure. The moisture content, unit density, ash content, and caloric value of OPT-based pellets were 3.55-5.35%, $525.56-855.23kg/m^3$, 2.76-3.44%, and 17.89-19.14 MJ/kg, respectively. The combustion profiles obtained by thermogravimetric analysis (TGA) seemed to be unaffected by the bark content on. Differential thermal analysis of TGA curve indicated different pyrolysis characteristic of hemicellulose, cellulose, and lignin.

• Journal of Forest and Environmental Science
• /
• v.30 no.4
• /
• pp.362-369
• /
• 2014

This study investigated physical properties and combustion gas characteristics for 8 types of wood pellets (4 domestic and 4 imported products) distributed in the domestic market. Results showed that most pellet types were first-grade pellets in the wood pellet quality standards in Korea with the exception of 3 pellet types from K company (second-grade in mechanical durability), G company (off-grade in nitrogen content) and P company (second-grade in ash percentage). Mixed pellets which contained more lignin and sap content were higher in mechanical durability (%) than that of white pellets. From the combustion gas analysis results, NOx emitted from all pellets combustion was at acceptable levels for national emission standard of the Clean Air Conservation Act except for pellets from G company. In addition, CO levels from all types of wood pellets were acceptable except for pellets from D company and domestic pellets were higher CO levels than imported pellets. These results indicate the higher CO levels in domestic pellets due to the usage of forest thinning materials including logging debris which usually had the high content of bark.

• Korean Journal of Ecology and Environment
• /
• v.48 no.4
• /
• pp.280-286
• /
• 2015

Life cycles of Sweltsa illiesi and S. lepnevae were determined from a headwater stream in Mt. Jumbong. Identification of nymphs was done by using DNA barcoding. Nymphs begin to have species specific color pattern on their head several months prior to adult emergence and differ in the form of the third antennal segment. Two species appear to have similar semivoltine life cycles in this stream, beginning to hatch from June and finishing adult emergence about 701 days later. The combined annual mean biomass in ash free dry mass (AFDM) was estimated as $96mg\;AFDM\;m^{-2}$. The combined annual secondary production were 373 mg and $297mg\;AFDM\;m^{-2}\;yr^{-1}$, calculated by using size frequency method and increment summation method respectively.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.5
• /
• pp.560-571
• /
• 1994

A single station representative of the razor clam, Solen (Solen) strictus, on a macrotidal flat, Inchon, Korea was sampled at bimonthly intervals between May 1989 and July 1990 by using a can corer. Estimates of growth rate and annual production of this razor clam have been made using the techniques of cohort growth analysis. Growth rate and production were highest during the first year after spawning and recruitment. The annual production was $2.83g\;DWt/m^2/yr$, mean annual biomass $256.3\;g/w^20$, and a turnover time of 5.00 yea, giving an annual turnover rate (P/B) of $0.20\;yr^{-1}$. The total annual production in wet weight ($33.22g\;WWt/m^2/yr$) appeared to consist of water in live flesh($72.6\%$) and shell($18.9\%$), whereas the dry weight of the soft parts was $8.52\%$, the ash-free dry weight $5.4\%$, and the ash content $3.1\%$ of the total wet weight.

• Transactions of the Korean hydrogen and new energy society
• /
• v.29 no.6
• /
• pp.559-569
• /
• 2018

Catalytic supports made of carbon have many advantages, such as high coking resistance, tailorable pore and surface structures, and ease of recycling of waste catalysts. Moreover, they do not require pre-reduction. In this study, ash-free coal (AFC) was obtained by the thermal extraction of carbonaceous components from raw coal and its performance as a carbon catalytic support was compared with that of well-known activated carbon (AC). Nickel was dispersed on the carbon supports and the resulting catalysts were applied to the steam reforming of toluene (SRT), a model compound of biomass tar. Interestingly, nickel catalysts dispersed on AFC, which has a very small surface area (${\sim}0.13m^2/g$), showed higher activity than those dispersed on AC, which has a large surface area ($1,173A/cm^2$). X-ray diffraction (XRD) analysis showed that the particle size of nickel deposited on AFC was smaller than that deposited on AC, with the average values on AFC ${\approx}11nm$ and on AC ${\approx}23nm$. This proved that heteroatomic functional groups in AFC, such as carboxyls, can provide ion-exchange or adsorption sites for the nano-scale dispersion of nickel. In addition, the pore structure, surface morphology, chemical composition, and chemical state of the prepared catalysts were analyzed using Brunauer-Emmett-Taylor (BET) analysis, transmission electron microscopy (TEM), scanning electron microscopy (SEM), x-ray diffraction (XRD), Fourier-transform infrared (FT-IR) spectroscopy, and temperature-programmed reduction (TPR).