• Applied Microscopy
• /
• v.29 no.4
• /
• pp.499-509
• /
• 1999

Accumulations of the storage proteins in protein storage vacuole and the differentiation of protein bodies from protein-filled ER in developing pea cotyledons have been investigated using conventional and immunoelectron microscopy. To improve the fixation quality, single cells separated enzymatically from sliced cotyledons were used. At early stages of seed development osmiophilic protein accumulates in rER lumen were observed quite often. This protein-filled ER cisternae were differentiated into cytoplasmic protein bodies at late stage by the process called terminal dilations which have been considered a principal route of the formation of cytoplasmic protein bodies somewhat later in seed maturation. Immunocytochemical labellings of the vicilin and legumin show that presence of vicilin on both of the cytoplasmic PB and PD, but limited presence of legumin only on the cytoplasmic PB at intermediate stage of seed development. Immunogold labellings of Bip, ER retention protein, were observed on the inner periphery of protein deposits in protein storage vacuole. This result was regarded that Bip can recognize and retrieve misfolded protein during active accumulation of storage protein to the PD in PSV.

• Applied Microscopy
• /
• v.42 no.2
• /
• pp.111-114
• /
• 2012

The scanning electron microscopy is an ideal technique for examining plant surface at high resolution. Most hydrate samples, however, must be fix and dehydrate for observation in the scanning electron microscope. Because the microscopes operate under high vacuum, most specimens, especially biological samples, cannot withstand water removal by the vacuum system without morphological distortion. Cryo-techniques can observe in their original morphology and structure without various artifacts from conventional sample preparation. Rapid cooling is the method of choice for preparing plant samples for scanning electron microscopy in a defined physiological state. As one of cryo-technique, high-pressure freezing allows for fixation of native non-pretreated samples up to $200{\mu}M$ thick and 2 mm wide with minimal or no ice crystal damage for the freezing procedure. In this study, we could design to optimize structural preservation and imaging by comparing cryo-SEM and convention SEM preparation, and observe a fine, well preserved Arabidopsis stem's inner ultrastructure using HPF and cryo-SEM. These results would suggest a useful method of cryo-preparation and cryo-SEM for plant tissues, especially intratubule and vacuole rich structure.

• Journal of Biomedical Engineering Research
• /
• v.23 no.1
• /
• pp.17-26
• /
• 2002

The purpose of this study was to investigate the important Parameters of the Pedicle screw by estimating the mechanical characteristics of screws under static and dynamic loads. Methodology for estimating Parameters under static load was proposed. It was also shown that the fatigue life of the one-level system could be increased by changing the shape of screws. Load parameters of the single pedicle screw were friction force. bending moment. and holding force. The test results of the one-level system could be inferred from teat results of the sin91e screw under bending force Fatigue life of the one-level system with flexible rod was longer than that of the upper Part test without rod . Considering the drop of flexibility of the rod due to muscles and ligament, fatigue life of the one-level system could be estimated b? that of the single screw.

• Journal of Pharmacopuncture
• /
• v.17 no.3
• /
• pp.7-15
• /
• 2014

Objectives: The present study investigated the toxic properties of petroleum ether extract of Wattakaka (W.) volubilis in Wistar female rats. Methods: An in vitro brine shrimp lethality bioassay was studied in A. Salina nauplii, and the lethality concentrations were assessed for petroleum ether extract of W. volubilis. A water soluble portion of the test extract was used in different concentrations from $100-1000{\mu}g/mL$ of 1 mg/mL stock solution. A 24-hours incubation with a 1-mL aliquot in 50 mL of aerated sea water was considered to calculate the percentage rate of dead nauplii with test extract administration against a potassium-dichromate positive control. The acute and the sub-acute toxicities of petroleum ether extract of W. volubilis were evaluated orally by using gavage in female Wistar rats. Food and water intake, body weight, general behavioral changes and mortality of animals were noted. Toxicity or death was evaluated following the administration of petroleum ether extract for 28 consecutive days in the female rats. Serum biochemical parameters, such as alanine aminotransferase (ALT), alkaline phosphatase (ALP), bilirubin, total cholesterol, triglyceride, total protein, glucose, urea, creatinine, sodium, potassium and ${\alpha}$-amylase levels, were measured in the toxicity evaluations. Pathological changes in isolated organs, such as the liver, kidneys, and pancreas, were also examined using hematoxylin and eosin dye fixation after the end of the test extract's administration. Results: The results of the brine-shrimp assay indicate that the evaluated concentrations of petroleum ether extract of W. volubilis were found to be non-toxic. In the acute and the sub-acute toxicity evaluations, no significant differences were observed between the control animals and the animals treated with extract of W. volubilis. No abnormal histological changes were observed in any of the animal groups treated with petroleum ether extract of W. volubilis. Conclusion: These results suggest that petroleum ether extract of W. volubilis has a non-toxic effect in Wistar female rats.

• Korean Journal of Ecology and Environment
• /
• v.44 no.2
• /
• pp.214-225
• /
• 2011

The objectives of the study were to evaluate seasonal patterns of epilimnetic water quality, and determine interannual eutrophication patterns at the dam site of Yong-dam Reservoir using long-term data during 2002~2009. Ionic dilutions, based on specific conductivity, occurred in the summer period in response to the intense monsoon rain and inflow, and suspended solid analysis indicated that the reservoir was clear except for the monsoon. Seasonality of nitrogen contents varied depending on the types of nitrogen and responded to ionic dilution; Ammonia-nitrogen ($NH_4$-N) peaked at dry season but nitrate-nitrogen ($NO_3$-N) peaked in the monsoon when the ionic dilution occurred. The maxima of $NO_3$-N seemed to be related with external summer N-loading from the watershed and active nitrogen fixation of bluregreens in the summer. $NO_3$-N was major determinant (>50%) of the total nitrogen pool and relative proportion of $NH_4$-N was minor. Long-term annual $NO_3$-N and TDN showed continuous increasing trends from 2004 to 2009, whereas TP and TDP showed decreasing trends along with chlorophyll-a (CHL) values. Empirical model analysis of log-transformed nutrients and N : P ratios on the CHL showed that the reservoir CHL had a stronger linear function with TP ($R^2$=0.89, p<0.001) than TN ($R^2$=0.35, p=0.120). Overall results suggest that eutrophication progress, based on TP and CHL, is slow down over the study period and this was mainly due to reduced phosphorns, which is considered as primary nutrient by the empirical model.

• KSBB Journal
• /
• v.20 no.3
• /
• pp.142-148
• /
• 2005

Succinic acid is an important material in industries producing biodegradable polymers, food and pharmaceutical products, and green solvents. Furthermore, succinate fermentation is a novel process due to the fixation of $CO_2$ into succinate during fermentation. However, the impurities in fermentation broth make the separation process of succinic acid be difficult. Reactive extraction has been proposed to be an effective primary separation step of succinic acid from dilute fermentation broth. This article presents the principles of reactive extraction along with the characteristics of tertiary amino extractants. A brief overview on the current research on reactive extraction of succinic acid is presented. Finally, for the succinic acid separation, reactive extraction as a primary step is suggested in the whole downstream process for succinic acid from fermentation broth.

• Journal of Biomedical Engineering Research
• /
• v.17 no.1
• /
• pp.61-70
• /
• 1996

In cementless total hip arthroplasty(THA), an initial stability of the femoral component is mandatory to achieve bony inyowth and secondary long term fixation. Primary stability of the femoral component can be obtained by minimizing the magnitude of relative micromotions at bone stem interface. An accurate evaluation of interf'ace micromotion and stress/strain fields in the bone-implant system may be relevant for better understanding of clinical situations and improving THA design. Recently finite element method(FEM) was introduced in'orthopaedic research field due to its unique capacity to evaluate stress in structure of complex shape, loading and material behavior. The authors developed the 3-dimensional finite element model of proximal femur with $Multilock^{TM}$ stem of 1179 blick elements to analyse the micromotions and mechanical behaviors at the bone-stem inteface in early post-operative period for the load simulating single leg stance. The results indicates that the values of relative motion for this well fit stem were $150{\mu}m$ in maximum $82{\mu}m$ in minimum and the largest relative motion was developed in medial region of Proximal femur and in anterior-posterior direction. The motion in the proximal bone was much greater than in the distal bone and the stress pattern showed high stress concentration on the cortex near the tip of the stem. These findings indicate that the loading on the hip joint in the early postoperative situation before achieving bony ingrowth could produce large micromotion of $150{\mu}m$ and clinicaly non-cemented THA patient should not be allowed weight bearing strictly early in the postoperative period.

• Proceedings of the KOSOMBE Conference
• /
• v.1995 no.05
• /
• pp.19-22
• /
• 1995

A biomechanical study was made to demonstrate the superior mechanical performance of the newly designed Miniplate staple to the conventional Coventry staple in high tibial osteotomy(HTO). Using twenty fresh porcine tibiae, the fixational strengh of the two different types of staple in HTO was compared. To minimize the error due to the specimen-to-specimen individuality, the bone mineral density of the tibiae was measured with a bone densitometry (Dual photon absorptionometer, Luner, USA) and those with $0.8\;{\sim}\;1.2\;gm/cm^2$ at the proximal tibia was used in the biomechanical test. Testing was performed on a material testing system (Autogram ET-5, Shimatzu, Japan) with aid of a commercial data processor (IBM 80386/ ASYST). Using two differant loading modes, 'pull-out' and 'push-out', the maximum resistant force required to release the staple from the substrate bone was recorded. In the pull-out test, ten non-osteotomized specimens were used and the staple was pullout by subjecting an axial tension on the head of the staple inserted. While in the pull-out test where ten tibiae osteotomized in the usual way of HTO were used, the staple was not directly loaded. In this testing, as a mimic condition of the natural knee, the distal part of the specimen tibia was pushed horizontally in order for the staple to be pulled out while the proximal tibia was fixed. The pull-out strength of Coventry staple and miniplate staple were found to be $27.88\;{\pm}\;5.12\;kgf$ and $182.47\;{\pm}\;32.75\;kgf$, respectively. The push-out strength of Coventry staple and miniplate staple were $18.40\;{\pm}\;4.47\;kgf$ and $119.95\;{\pm}\;19.06\;kgf$, respectively. The result revealed that miniplate staple had the pull-out/ push-out strength at least fivetimes higher than Coventry staple. Based on the measured data, it was believed that the newly designed miniplate staple could provide much better postoperative fixation in HTO. The postoerative application of long leg casting may not be needed after HTO surgery.

• Journal of Biomedical Engineering Research
• /
• v.22 no.1
• /
• pp.69-80
• /
• 2001

본 연구에서는 환자의 골다공증 유무에 따른 내고정 장치 시술 직후 및 융합 후의 안정성을 평가하기 위해 다양한 하중 모드에서 C5-C6 운동분절의 생체역학적 거동을 분석하였다. 이러한 목적으로 먼저, C5-C6 경추부의 유한요소 모델을 구현하여 검증하였다. 모델의 결과는 기존 실험치와 유사하여 신뢰성이 부여되었다. 검증된 모델은 Smith-Robinson 방식으로 골이식물을 삽입한 후 전방 내고정 장치를 적용한 시술 상황을 재현하기 위해 수정되었다. 수정된 모델은 두 종류로 구현되었다. (1) 첫 번째 모델에서는, 시술 직후의 상황을 재현하기 위해 골이식물과 종판의 경계면에 접촉요소를 사용하였다. (2)두 번째 모델에서는 완전히 융합된 상황을 나타내기 위해 골이식물을 종판에 고정하였다. 골다공증의 효과를 예측하기 위하여 두 모델의 해면골에 대한 탄성계수를 변화시켰다(정상: 100MPa, 골다공증: 40MPa). 각 모델의 C5 주체의 상위면에 73.6N의 압축 하중을 가한 후에 108Nm의 굴곡/신전, 굽힘, 비틀림 하중을 가하였으며, C6 추체의 하단면은 모든 방향에 대하여 구속하였다. 전체적인 결과에 있어서 상대적 회전운동, 미끄럼운동, 골이식물 내에서의 von Mises 응력의 경우 정상 모델에 비해 골다공증 모델에서 증가함을 보였으며, 특히 시술 직후의 모델에서 비틀림 하중이 가해진 경우, 상대적 회전운동 및 미끄럼 운동이 가장 높게 예측되었다. 이는 골다공증환자에게 전방 내고정 장치를 시술한 경우 골이식물의 파단 및 유합의 실패가 비틀림 하중에서 발생할 수 있음을 나타낸다. 해면골의 von Mises 응력은 시술 직후에 골다공증 모델의 모든 하중 모드에서, 유합 후에는 굽힘 하중 외의 모든 하중에서 ultimate strength를 초과하는 것으로 나타나 골다공증 환자에게 screw의 해리가 발생할 가능성이 높은 것으로 예측되었다. 따라서 골다공증 환자에게 과도한 운동이 발생하지 않도록 하기 위해서 시술 후 세심한 주의와 halo 같은 견고한 정형술이 필요할 것으로 사료된다.

• Korean Journal of Ecology and Environment
• /
• v.52 no.3
• /
• pp.231-244
• /
• 2019

Zooplankton is essential biological assemblage in understanding the structure and function of aquatic ecosystems, since it plays as a linkage between primary producers and higher trophic level organisms such as fish. Although zooplankton has planktonic characteristics, the sampling and treatment methods for its community analyses are more complicated and variable compared with phytoplankton due to its high diversity in body size and species-specific depth selection behaviors. In the present paper, we reviewed representative classical methods for field sampling and treatments of freshwater zooplankton in relation with quantification of its community structure, and suggested appropriate methods depending on various research objectives.