• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.533-536
• /
• 2007

The LiDAR data structure has the potential for modeling in three dimensions because the LiDAR data can represent voxels with z value under certain defined conditions. Therefore, it is possible to classify the physical damaged degree of vegetation by forest fire as using the LiDAR data because the physical loss of canopy height and width by forest fire can be relative to an amount of points reached to the ground through the canopy of damaged forest. On the other hand, biological damage of vegetation by forest fire can be explained using the NDVI (Normalized Difference Vegetation Index) which show vegetation vitality. In this study, we graded the damaged degree of vegetation by forest fire in Yangyang-Gun of South Korea using the LiDAR data for physical grading and digital aerial photograph including Red, Green, Blue and Near Infra-Red bands for biological grading. The LiDAR data was classified into 2 classes, of which one was Serious Physical Damaged (SPD) and the other was Light Physical Damaged (LPD) area. The NDVI was also classified into 2 classes which are Serious Biological Damaged (SBD) and Light Biological Damaged (LBD) area respectively. With each 2 classes ofthe LiDAR data and NDVI, the damaged area by forest fire was graded into 4 degrees like damaged class 1,2,3 and 4 grade. As a result of this study, 1 graded area was the broadest and next was the 3 grade. With this result, we could know that the burned area by forest fire in Yangyang-Gun was damaged rather biologically because the NDVI in 1 and 3 grade appeared low value whereas the LiDAR data in 1 and 3 grade included light physical damage like the LPD.

• Korea-Australia Rheology Journal
• /
• v.17 no.2
• /
• pp.63-69
• /
• 2005

The stability of low-speed spinning process exhibiting spinline flow-induced crystallization (FIC) with no neck-like spinline deformation has been investigated using the method of linear stability analysis. Effects of various process conditions such as fluid viscoelasticity and the spinline cooling on the spinning stability have been found closely related to the development of the spinline crystallinity. It also has been found that the FIC makes the system less stable or more unstable than no FIC cases when the spinline crystallinity reaches its maximum possible value, whereas the FIC generally stabilizes the system if the crystallinity doesn't reach its maximum value on the spinline. It is believed that the destabilizing effect of the FIC on low-speed spinning when the crystallinity is fully developed on the spinline is due to the reduction of the real spinning length available for deformation on the spinline. On the other hand, the increased spinline tension caused by the FIC when the maximum crystallinity is not reached on the spinline and thus no reduction in the spinning length occurs, makes the sensitivity of spinline variables to external disturbances smaller and hence stabilizes the system. These linear stability results are consistent with the findings by nonlinear transient simulation, as first reported by Lee et al. (2005b).

• Proceedings of the Microbiological Society of Korea Conference
• /
• 2008.05a
• /
• pp.118-118
• /
• 2008

The phylogenetic diversity of microbial communities in calcareous mats from Spearfish Creek, a freshwater stream located in the Black Hills of South Dakota, was examined using PCR-based 16S rDNA sequence analysis. In this study, two types of calcareous mats were compared: mature mats formed on the natural substrate of rock surfaces and developing mats on an artificial substrate of glass slides. Among 63 unique isolates from a clone library of 16S rRNA genes from mature mat samples, there were 8 phyla of Bacteria represented. The predominant phylum was Proteobacteria (48%), with the $\beta$ subclass being the largest group. Denaturing gradient gel electrophoresis (DGGE) analysis of 16S rRNA genes from slide samples collected at intervals for four months showed considerable diversity of the microbial community from the earliest stages of community development. Amplicons isolated from DGGE gels and sequenced indicated that community succession has occurred without increasing microbial diversity. However, light microscopic analysis revealed a significant increase in microbial cell density throughout the community development. Scanning electron microscopy of mat samples provides evidence that diatoms are also important members of calcareous mat communities.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.2 no.3
• /
• pp.32-37
• /
• 1999

There is a need to suggest the standards of selection on the cuttings, because the selection of the willow(Salix) cuttings is very important, which will be used as the bioengineering revegetation material to protect the slope by strengthening soil and preventing soil erosion under the bad site conditions. In this study, we measured the lengths and the diameters of original willow cuttings, the total numbers and the lengths of the new shoots and roots after 15 months since the experimental construction of the slope revegetation technology of biological engineering was conducted, and analyzed the correlation between the lengths and the diameters of willow cuttings and the lengths of new roots using the SPSS program. The results are as follows; First, the lower the elevation of tested slope was, the more the number of new shoots and the average lengths of new roots increased. Secondly, the ratio of underground parts and aboveground parts was 4.24 ~ 5.93 proving the fact that the willow(Salix) is one of the species deep rooted with developed underground parts. Thirdly, there is a strong correlation between the diameters of willow cuttings and the total lengths of new roots, whereas, there is no correlation between the lengths of willow cuttings and the total lengths of new roots. In conclusion, it is more efficient for the early rapid revegetation and slope stabilization to select willow cuttings with the biggest possible diameters than with the longest lengths as the slope revegetation materials of biological engineering.

• Journal of Hydrogen and New Energy
• /
• v.22 no.1
• /
• pp.60-68
• /
• 2011

[ $ZrO_2-TiO_2$ ]binary oxides with various Zr:Ti molar ratios were prepared by sol-gel method and Nafion$^{(R)}$/$ZrO_2-TiO_2$ composite membranes were fabricated for proton exchange membrane fuel cells (PEMFCs) at high temperature and low humidity. Water uptake, Ion exchange capacity (IEC), and proton conductivity of Nafion$^{(R)}$/$ZrO_2-TiO_2$ composite membranes were characterized and these composite membranes were tested in a single cell at $120^{\circ}C$ with various relative humidity (R.H.) conditions. The obtained results were compared with the unmodified membranes (Nafion$^{(R)}$ 112 and Recast Nafion$^{(R)}$). A Nafion$^{(R)}$/$ZrO_2-TiO_2$ composite membrane with 1:3 of Zr:Ti molar ratio showed the highest performance. The performance showed 500 mW/$cm^2$ (0.499V) at $120^{\circ}C$, 50% R. H., and 2 atm.

• Journal of Electrochemical Science and Technology
• /
• v.7 no.3
• /
• pp.234-240
• /
• 2016

The effect of initial electrolyte loading (IEL) on cell performance in a coin-type molten carbonate fuel cell (MCFC) was investigated in this work. Since the material of MCFC depends on the manufacturer, optimisation requires experimental investigation. In total, four IEL values, 1.5, 2.0, 3.0, and 4.0 g, were used, corresponding to a pore filling ratio (PFR) of 38, 51, 77, and 102%, respectively. The cell performance with respect to the PFR was analysed via steady-state polarisation, step-chronopotentiomtery, and impedance methods. The electrochemical analyses revealed that internal resistance and overpotential of the cell decreased with increasing PFR, and a large overpotential was observed when the PFR was 102%, probably due to the flooding phenomenon. After operation, cross-section of the cell was analysed via surface analysis of SEM and EDS methods, and the remaining electrolyte was estimated by dissolution of the cell in 10 wt% acetic acid. A linear relationship between IEL and the weight reduction ratio by dissolution was obtained. Thus, the remaining amount of electrolyte could be measured after operation. The results of SEM and EDS showed that a PFR of 38 and 102% showed a lack and flooding of electrolytes at the cell, respectively, which led to a large overpotential. This work reports that MCFC performance is allowed only in the narrow range of PFR.

• Polymer(Korea)
• /
• v.30 no.5
• /
• pp.373-379
• /
• 2006

Polymerizable discotic liquid crystals containing diacetylene and acryloyl groups were formed through hydrogen bonding between phloroglucinol core and polymerizable pyridine derivatives, and their photopolymerization behavior was investigated. The discotic complexes exhibited discotic columnar and rectangular columnar mesophases depending on the number of aromatic rings. Photopolymerization of the discotic complexes was carried out by UV irradiation in the liquid crystalline state. IR and UV-Vis spectroscopy affirmed that diacetylene and acryloyl groups were selectively Polymerized, and that crosslinked polymers containing short conjugated diacetylene oligomers were produced by 1,4-addition. X-ray diffraction experiment showed that the columnar order in the discotic complex containing phenyl-pyridine moiety was maintained after photopolymerization, and that the rectangular columnar order in he discotic Complex with biphenyl units was changed to the lamellar order.

• Journal of Environmental Health Sciences
• /
• v.43 no.5
• /
• pp.382-392
• /
• 2017

Objectives: The purpose of this study is to obtain basic data on the development of a risk communication model through an investigation of risk perception for radon and identify effective risk communication channels. Methods: A questionnaire was used to evaluate differences in perception level according to respective communication channels. A chi-squared test was used to analyze the difference in pre- and post-risk communication by communication channel. One-way ANOVA was used to analyze the difference in the radon risk perception rate for each communication channel. Results: All of the communication channels resulted in increased radon risk perception, but there was no statistical difference between them in terms of perception (p>0.05). However, based on previous findings that it is effective to use a multi-channel approach, it is considered that communication channels based on duplicate avenues is most appropriate. Conclusions: It is expected that this study will be used as basic data to better understand the formation of public opinion about radon risk and to understand the social reaction to each risk factor.

• KSBB Journal
• /
• v.19 no.6 s.89
• /
• pp.489-493
• /
• 2004

The hydrolysis characteristics of various fatty acids composing the fish oil was investigated for function of acyl chain specificities using Lipase-OF 360,000 from Candida cylindracea. The hydrolysis of fatty acids decreased with the increase of the number of carbon and double bond in the fatty acids, in case that the number of double bond and the position of the first double bond from the methyl group of fatty acids were the same. The position of the first double bond was found to be an acyl chain specificity of Lipase-OF 360,000 for the hydrolysis of fish oil. Lipase-OF 360,000 also showed the another acyl chain specificity that the increase of double bond of fatty acids, having the same number of carbon and the position of double bond, brought about the decrease of hydrolysis.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.2
• /
• pp.312-317
• /
• 2002

Indigenous lactobacilli were isolated from vaginas of Korean women for possible use in ecological treatment of bacterial vaginosis. Vaginal swab samples were obtained from a gynecological clinic and streaked on Rogosa SL agar plates to select the most predominant lactobacilli in each sample. The preliminary identification of the isolates as lactobacilli was based on microscopic observation of Gram-positive rod-shaped cell morphology. The initial characterization was performed on 108 isolates in terms of their cell surface hydrophobicity (CSH), antimicrobial activity, and hydrogen peroxide (H₂O₂) production capability, and 10 isolates were then selected for further molecular identification. For a rapid procedure to identify lactobacilli, polymerase chain reaction (PCR) and restriction fragment length polymorphism (RFLP) analyses of the l6S rRNA genes were applied. The 10 selected lactobacilli and 9 different reference strains of Lactobacillus spp. were characterized by PCR-RFLP where the amplified l6S rDNA was digested with 7 different restriction endonucleases prior to analysis. DNA sequencing of the 16S rRNA gene of one particular isolate, KLB 46, that had been identified as L. crispatus by the PCR-RFLP analysis, further confirmed its identity as L. crispatus.