• Macromolecular Research
• /
• v.8 no.5
• /
• pp.199-208
• /
• 2000

The recent development of biodegradable polymers for drug delivery system (DDS) has been investigated. The biodegradable polymers for DDS are mainly discussed in two categories: one category is natural biodegradable polymers such as polysaccharides, modified celluloses, poly(${\alpha}$-amino acid)s, modified proteins, and microbial biodegradable polymers; the other is synthetic biodegradable polymers such as poly(ester)s, poly(ortho ester)s, poly(phosphazene)s, poly(anhydride)s, poly(alkyl cyanoacrylate)s, and multiblock copolymers. The bioconjugate polymeric drug delivery systems have been also proposed for the design of biocompatible polymeric controlled drug delivery.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.2
• /
• pp.125-131
• /
• 2016

The biodegradable film application can escape from plastic environmental pollution. This experiments studied the effect of biodegradable mulch film on the soil microbial community using fatty acid methyl ester method in soybean production field. The soil $NO_3$-N content in polyethylene mulch film (PE) soil was significantly higher than biodegradable mulch film soil (p < 0.05). The soil microbial community of Gram negative bacteria showed significantly higher in biodegradable mulch film soil than PE mulch film soil (p < 0.05). In addition, biodegradable mulch film soil had significantly low ratio of cy17:0 to $16:1{\omega}7c$ and cy19:0 to $18:1{\omega}7c$ compared with those of PE mulch film soil (p < 0.05), indicating that microbial stress decreased. The ratio of cy17:0 to $16:1{\omega}7c$ and cy19:0 to $18:1{\omega}7c$ should be considered as a potential responsible factor for the obvious differentiation that was observed between the biodegradable mulch film soil and PE mulch film soil in a upland field. The results of this experimentation show the potential of using biodegradable mulch film in place of PE.

• Polymer(Korea)
• /
• v.35 no.5
• /
• pp.424-430
• /
• 2011

Biodegradable poly[(glycine ethyl ester)-(phenylalanine ethyl ester) phosphazene](PGPP) microparticles were fabricated by electrohydrodynamic atomization to apply drug release test. Atomization parameters such as applied voltage, polymer concentration, and molecular weight were investigated to inspect their effects on the size and morphology of microparticles. The average diameter of PGPP microparticles decreased as increasing applied voltage and solution flow rate. Dichloromethane/dioxane mixture shows better results for the preparation of microparticles than single solvent owing to the different PGPP solubility in solvent. Blending PGPP polymers with proper molecular weights not only favored the production of spherical PGPP microparticles via electrohydrodynamic atomization, but also provided a way to adjust drug (rifampicin) release behavior. Drug-loaded biodegradable polyphosphazene microspheres can be fabricated via electrohydrodynamic atomization, which has potential use in biomedical applications.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.309-310
• /
• 2002

A minimal quantity lubrication (MQL) machining is able to achieve both functions of cooling and lubrication with an extremely low quantity of a cutting fluid and a large amount of air blow. Using a biodegradable ester oil, turning tests were carried out to evaluate the effectiveness of the MQL system. It was found that the performance of MQL cutting was equivalent to, or better than, that of conventional cutting, because the MQL system tends to prevent the heat damage of the tool tip and, if an effective lubricant such as a particular polyol ester is applied to the system, it can avoid the extensive transfer of workpiece materials on to the tool surface.

• Archives of Pharmacal Research
• /
• v.9 no.2
• /
• pp.63-73
• /
• 1986

The use of biodegradable polymetric materials as drug carriers is a relatively new dimension in polymeric drug delivery systems. A number of biodegradable or bioerodible polymers, such as poly(lactic/glycolic acid) copolymer, poly($\alpha$-amino acid), polyanhydride, and poly (ortho ester) are currently being investigated for this purpose. These polymers are useful for matrix and reservoir-type delivery devices. In addition, when chemical functional groups are introduced to the biodegradable polymer backdone, such as poly (N-(2-hydroxypropyl) methacrylamide), the therapeutic agent can be covalently bound directly or via spacer to the backbone polymer. These polymer/drug conjugates represent another new dimension in biodegradable polymeric drug delivery systems. In addition, examples of biodegradable polymeric durg delivery systems currently being investigated will be discussed for the purpose of demonstrarting the potential importance of this new field.

• Macromolecular Research
• /
• v.11 no.1
• /
• pp.42-46
• /
• 2003

Cell attachment and proliferation on the polymer films of triblock copolymer(ester-ether)s comprising po1y (L-1actide) (PLLA) and poly (oxyethylene-co-oxypropylene)(PN) were investigated using 3T3 fibroblasts. It was found that on the tissue culture polystyrene(TCPS) and the PLLA control film the cells could spread well while on the copolymer films the cells showed a rounded morphology without spreading and proliferated weakly. Especially, little cells proliferated on the films of copolymer having a LN composition of 20 wt%. While the water absorption of the copolymer films increased with increasing PN content, the contact angle against water of copolymer films immersed in aqueous medium was almost identical, being slightly lower than that of the PLLA film. These properties were compatible with the results of cell attachment. The in vitro hydrolysis of the films of triblock and multiblock type copolymers was faster with increasing PN content. The increased hydrolyzability, the flexibility and the decreased cell attachment suggested that these copolymers may have high potential as biodegradable materials for medical use.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.2
• /
• pp.75-81
• /
• 2010

Characteristics of mixing biodegradable polymers and polymer impregnated paper for mulching mat for seedling were investigated. The mixed film of 70% PLA was most easily biodegradable. The surface of polymer films were changed to more rough due to enzymatic degradation of lipase. Tensile strength and breaking elongation of PLA mixed films were increased to the 0.04-0.31 kN/m and the 0.17-0.96%, respectively. With higher PLA contents, intensities of ester originated carboxyl group(about $1,748cm^{-1}$) were increased. Physical properties of prepared mulching mats were increased with PLA contents and stiffness of mulching mat was not so much changed.

• Macromolecular Research
• /
• v.17 no.10
• /
• pp.734-738
• /
• 2009

Biodegradable, pH-sensitive, glycol chitosan (GC) hydrogels were prepared using divinyl adipate (DVA) as a crosslinker and acetic acid as a catalyst. DVA has highly reactive double vinyl ester groups and GC contains a high density of hydroxyl groups, with two in every glucosamine unit. The transesterification reaction between vinyl esters and hydroxyl groups produced crosslinked GC hydrogels. The initial crosslinking reaction was monitored by measuring the viscosity of the reaction mixture. When DVA was added to the GC solution and heated to $50^{\circ}C$, the viscosity of the GC solution gradually increased, implying a crosslinking reaction and hydrogel formation. A new peak from the ester group was observed in the FTIR spectra of the GC hydrogels, confirming the crosslinking reaction. The synthesized GC hydrogel showed pH-dependent water absorbency, mainly due to the presence of amine groups ($-NH_2$) at the C-2 position of the glucosamine unit of GC. The water absorbency greatly increased at acidic pH and slightly decreased at alkaline pH. The GC hydrogel gradually degraded in $37^{\circ}C$ water due to hydrolysis of the ester bonds, which were intermolecular crosslinking sites. A red dye, 5-carboxyltetramethyl-rhodamine (CTMR), was entrapped in the GC hydrogels as a model compound. CTMR was released from GC hydrogels in two steps: an initial burst release mainly due to desorption and diffusion, and a second sustained release possibly due to gradual degradation.

• Clean Technology
• /
• v.8 no.4
• /
• pp.223-228
• /
• 2002

The biodegradable Properties of various polyester resins with different chemical structures have been studied by applying the controlled compost test and soil burial test. Celluose was taken as a fully biodegradable reference resin while PVC and PE were empolyed as non-biodegradable reference chains or ester group were rather easily degraded by hydrolase, meanwhile copolymer type polyesters which contain aromatic rings showed relatively low biodegradability. According to the results from controlled compost test, cellulose(the positive reference) showed 70.6% degradation after 45 days, whereas synthetic poly(butylene adipate-co-succinate), poly(butylene succinate), poly(butylene adipate-co-succinate-co-terephthalate) showed 44.0%, 32.0% and 23.4% degradation respectively. In this regard, it was concluded that biodegradable properties of polymers are largely dependant on the chemical structures constituting the polymers.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.3
• /
• pp.113-116
• /
• 2014

Power transformer insulation oil is critical to the useful life of the transformer. Although mineral base insulation oil is the most common type of transformer insulation oil in use, environmental and safety concerns has encouraged the development of biodegradable alternatives. Today, $Envirotemp^{(R)}\;FR3^{TM}$ is in commercial use and this study is aimed at ascertaining the possibility of applying the oil in Malaysia power transformers. A sample of $Envirotemp^{(R)}\;FR3^{TM}$ was tested to measure and compare the technical (including electrical, chemical and physical) properties of the oil according to Malaysian standards. The study found that the oil sample had better qualities, such as higher dielectric strength, lower dissipation factor, higher flash and fire points, higher moisture absorption capability, and less dissolved gases composition amongst others. However, it was also ascertained that further development in this area could be hindered due to Malaysia's lack of standards for biodegradable oil.