• Journal of Electrochemical Science and Technology
• /
• v.9 no.1
• /
• pp.44-50
• /
• 2018

The aims of this study were to determine the corrosion behavior of pure copper in the presence of Desulfovibrio sp. and also to investigate the effects of glutaraldehyde (GD) and isothiazolinone (ISO) on the corrosion behavior of pure copper in the presence of this sulfate-reducing bacteria (SRB) strain by using electrochemical techniques. Electrochemical measurements of pure copper were carried out at specified time intervals (0, 8, 24, 48, and 96 hr) over a period of exposure. Corrosion rates of pure copper from anodic and cathodic Tafel slopes and corrosion potential ($E_{corr}$) were determined. Biofilm and corrosion products on the copper surfaces were observed by Field Emission Scanning Electron Microscopy (FESEM) and Energy Dispersive X-Ray Spectrometry (EDS) analyses. The effects of solution types (PC (Postgate's C medium) and SRB (Desulfovibrio sp.)) and exposure times of copper and biocides (ISO or GD) on the corrosion rates of pure copper were evaluated by statistical analyses. As a result of the FESEM analysis, biofilm formation was observed on the surfaces of pure copper exposed to the Desulfovibrio sp. cultures both with and without the biocides. The results show that the pure copper was corroded by Desulfovibrio sp. However, the addition of GD or ISO to the Desulfovibrio sp. culture resulted in a decrease in the corrosion rate of the pure copper. It was also observed that both of the biocides showed a similar effect on pure copper's corrosion rate caused by Desulfovibrio sp.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.5
• /
• pp.1-11
• /
• 2001

In the past, abundant and clean water was available for paper mills'use. However, the growth of population and industry made water less available nowadays. Also, environmental regulation limits wastewater discharge, which affects mill operation cost. Therefore, paper mills are under pressure to use more recycled water and mill system closure. As a result, chemical and physical parameters of water are changing and new environment if being created for microorganisms in paper mill system as well. The more soluble or suspended organic materials are increased as more water is recycled and less or scarce dissolved oxygen is available, depending on the degree of recycled water usage. Microorganism flora ill paper mill system will be a1so shifted according to the environmental change of mill system. Anaerobic bacteria, including sulfate reducing bacteria (SRB), will be dominant in the system as very low or almost no oxygen available in the system. Nevertheless, it is common in domestic paper mills that employ the same and old biocides as a means of microbial control, and microbiological control is often less recognized or even neglected. The right biocide selection for increased reductive environment of mills is critical for operation and estimated loss from paper quality defects such as sheet break, holes due to microbiological cause is tremendous compared to the microbiological control cost. It is imperative to investigate and diagnosis the environmental change of mills for right control of cumbersome microorganisms. Several useful diagnosis tools, including new technology employing OFM(Optical Fouling Monitor) in situ, are illustrated.

• Toxicological Research
• /
• v.30 no.3
• /
• pp.205-210
• /
• 2014

Didecyldimethylammonium chloride (DDAC) is used for various purposes, such as a fungicide for coolants, an antiseptic for wood, and disinfectant for cleaning. Despite the increasing likelihood of DDAC inhalation, available data on its toxicity from inhalation are scarce. Therefore, this study was aimed at confirming the toxicity of DDAC after inhalation exposure for 2 wk. Male Sprague-Dawley rats were exposed to approximately $0.15mg/m^3$, $0.6mg/m^3$, and $3.6mg/m^3$ DDAC aerosols in whole-body exposure chambers. After DDAC exposure for 2 wk, effects of DDAC on body weight, blood, bronchoalveolar lavage (BAL), and the lungs were verified. The mass median aerodynamic diameter of DDAC aerosols was $1.86{\mu}m$ and the geometric standard deviation was 2.75. The concentrations of DDAC aerosols for the low, medium, and high groups were $0.15{\pm}0.15mg/m^3$, $0.58{\pm}0.40mg/m^3$, and $3.63{\pm}1.56mg/m^3$, respectively. Body weight gain was significantly influenced by DDAC exposure. In the high group, a body weight decrease of 2.6 g was observed, whereas a 25.8 g increase was observed in the normal control group after the first 3 days. The low and medium groups showed 23.3 g and 20.4 g increases, respectively, after the first 3 days. Decreases in body weight were recovered during the next 4 days. In contrast, no changes were noted in hematological and blood biochemistry parameters after DDAC exposure. Furthermore, only mild effects were observed on bronchoalveolar cell differentiation counts and cell damage parameters in the BAL fluids of the medium and high groups. Although inflammatory cell infiltration and interstitial pneumonia were partially observed, fibrosis was not found in the lungs of the medium and high groups. In conclusion, body weight gain and the lungs were mainly affected by DDAC exposure. The no-observed-adverse-effect level (NOAEL) for DDAC was determined as $0.15mg/m^3$.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.1
• /
• pp.13-20
• /
• 2019

Objective: This study was performed to propose a domestic occupational exposure limit(OEL) following a health hazard assessment, calculation of a non-carcinogenicity reference concentration worker($RfC_{worker}$) value, and examination of international agencies' exposure limits. It also recommends legal management within the Occupational Safety and Health Act for PHMG-Phosphate(CAS No. 89697-78-9), It is a humidifier disinfectant that generated many lung injuries. Methods: We have investigated the recommendation or guidelines of foreign OEL for PHMG-Phosphate and the actual state of legal management in Korea. To examine the procedures and methods for recommendation OEL. Toxicological hazard and health hazard classifications were examined and a non-carcinogenicity $RfC_{worker}$ value was calculated for PHMG-Phosphate. An OEL and the necessity of legal management were recommended as well. Results and Conclusions: The OEL for PHMG-Phosphate is recommended to be $0.01mg/m^3$. The recommended OEL is close to 10 times the RfCworker value of $0.000833mg/m^3$ calculated from the chemical dose-response hazard assessment, which is a 2017 study. The CMIT/MIT(3:1) mixture, which was a social issue as a humidifier disinfectant substance, was also exposed to the same ratio in March 2018, establish the OEL. It is recommended to establish OEL for PHMG-Phosphate to prevent worker health hazards and for chemical safety management.

• Journal of Environmental Health Sciences
• /
• v.47 no.6
• /
• pp.513-520
• /
• 2021

Background: Benzalkonium chloride (BKC) has been extensively used as a preservative in industrial products and in hygiene, medical, and cosmetic applications. Humidifier disinfectant (HD) products containing BKC have been used in South Korea. Objectives: This study was aimed to review types of products containing BKC, to summarize the regulations in the US, EU, Japan, and South Korea, and to review the health effects associated with the use of HD. Methods: We reviewed and summarized documents which were searched through PubMed and Google Scholar with the key words: BKC and asthma/contact dermatitis, humidifier disinfectant-associated lung injury (HDLI), and more. Results: Regulations in most countries including South Korea do not allow its use as disinfectants in spray-type of products for medicine, cosmetics, and household products. Two types of HD containing BKC (800~1,270 ppm) were marketed in South Korea from 1996~2003. Health effects reported from people who used products containing BKC were allergic contact dermatitis, erythema, and respiratory disease, including asthma. Two people who responded as HD users containing BKC only were confirmed to have developed asthma. HD-associated lung injury (HDLI) was reported by consumers who used both HD containing polyhexamethylene guanidine (PHMG) and HD containing BKC. Conclusions: In conclusion, the use of BKC as a biocide has to be controlled considering the route and pattern of exposure. Products containing BKC as preservatives were reviewed with exposure routes and sites in the human body such as skin, eyes, and the respiratory tract. HD containing BKC was clinically evaluated to be associated with asthma.

• The Plant Pathology Journal
• /
• v.38 no.4
• /
• pp.334-344
• /
• 2022

Bacterial wilt is a re-emerging disease on dry bean and can affect many other crop species within the Fabaceae. The causal agent, Curtobacterium flaccumfaciens pv. flaccumfaciens (CFF), is a small, Gram-positive, rod-shaped bacterium that is seed-transmitted. Infections in the host become systemic, leading to wilting and economic loss. Clean seed programs and bactericidal seed treatments are two critical management tools. This study characterizes the efficacies of five bactericidal chemicals against CFF. It was hypothesized that this bacterium was capable of forming biofilms, and that the cells within biofilms would be more tolerant to bactericidal treatments. The minimum biocide eradication concentration assay protocol was used to grow CFF biofilms, expose the biofilms to bactericides, and enumerate survivors compared to a non-treated control (water). Streptomycin and oxysilver bisulfate had EC95 values at the lowest concentrations and are likely the best candidates for seed treatment products for controlling seed-borne bacterial wilt of bean. The results showed that CFF formed biofilms during at least two phases of the bacterial wilt disease cycle, and the biofilms were much more difficult to eradicate than their planktonic counterparts. Overall, biofilm formation by CFF is an important part of the bacterial wilt disease cycle in dry edible bean and antibiofilm bactericides such as streptomycin and oxysilver bisulfate may be best suited for use in disease management.

• Journal of Environmental Health Sciences
• /
• v.43 no.1
• /
• pp.1-22
• /
• 2017

'The worstest environment disaster', 'World's first biocide massacre', 'Home-based Sewol ferry disaster' are all phrases attached to the recent humidifier disinfectant disaster. In the spring of 2011, four of 8 pregnant women including 1 adult man passed away at a university hospital in Seoul due to breathing failure. Epidemiologic investigation conducted by the Korean CDC soon revealed the inhalation of humidifier disinfectant, which had been widely used in Korea during the winter, to be responsible for the disease. As well as lung fibrosis hardening of the lungs, other diseases including asthma, rhinitis, skin disease, liver disease, fetal disease or cancers have been researched for their relation with exposure to the products. By February 9, 2017, 5,342 cases had registered for health problems and 1,131 of them were already dead (20.8% mortality rate). Based on studies by government agencies and a telephone survey of the general population by Seoul National University and civic groups, around 20% of the general public of Korea has used these products. Since the market release of the first product by SK Chemical in 1994, over 7.1 million items from around 20 brands were sold up to 2011. Most of the products were manufactured by well-known large conglomerates such as SK, Lotte, Samsung, Shinsegye, LG, and GS, as well as some European companies including UK-based Reckitt Benckiser and TESCO, the German firm Henkel, the Danish firm KeTox, and an Irish company. Even though this disaster was unveiled in 2011 by the Korean government, the issue of the victims was neglected for over five years. In 2016, an unexpected but intensive investigation by prosecutors found that Reckitt Benckiser manipulated and concealed animal tests for its own brand and brought several university experts and company employees to court. The matter was an intense social issue in Korea from May to June with a surge in media coverage. The prosecutor's investigation and a nationwide boycott campaign organized by victims and environmental groups against Reckitt Benckiser, whose product had been used by more than 70% of victims, led to the producer's official apology and a compensation scheme. A legislative investigation organized after the April 2016 national election revealed the producers' faults and the government's responsibility, but failed to meet expectations. A special law for the victims passed the National Assembly in January 2017 and a punitive system together with a massive environmental epidemiology investigation are expected to be the only solutions for this tragedy. Sciences of medicine, toxicology and environmental health have provided decisive evidence so far, but for the remaining problems the perspectives of social sciences such as sociology and jurisprudence are highly necessary, similar to with the Minamata disease and Wonjin Rayon events. It may not be easy to follow this issue using unfamiliar terminology from medical and chemical science and the long, complicated history of the event. For these reasons the author has attempted to write this article in a question and answer format to render it easier to follow. The 17 questions are: Q1 What is humidifier disinfectant? Q2 What kind of health problems are caused by humidifier disinfectant? Q3 How many victims are there? Q4 What is the analysis of the 1,112 cases of death? Q5 What is the problem with the government's diagnostic criteria and the solution? Q6 Who made what brands? Q7 Has there been a recall? What is still on sale? Q8 Was safety not checked by any producers? Q9 What are the government's responsibilities? Q10 Is it true that these products were sold only in Korea? Q11 Why and how was it unveiled only in 2011 after 17 years of sales? Q12 What delayed the resolution of the victim issue? Q13 What is the background of the prosecutor's investigation in early 2016? Q14 Is it possible to report new victim cases without evidence of product purchase? Q15 What is happening with the victim issue? Q16 How does it compare with the cases of Minamata disease and Wonjin Rayon? Q17 Are there prevention measures and lessons?

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.37 no.4
• /
• pp.347-350
• /
• 2011

Biofilms are surface-attached microbial communities with phenotypic and biochemical properties distinct from free-living planktonic cells. Biofilm bacteria show much greater resistance than planktonic counterparts and much higher concentration of biocide is needed to treat biofilms compared to the dosage used for planktonic bacteria. As a result, alternative strategies or more effective agents exhibiting activity against biofilm-producing micro-organisms are of great interest. Therefore, we turned our attention to control of biofilm of S. aureus. The aims of this research are to investigate substances which inhibit the formation of biofilm by S. aureus and to suggest effective materials for controlling skin problems. We coated slide glasses with human placental collagen and the coverslip was incubated with test materials and bacteria. The coverslip was stained with crystal violet and we measured optical density of each sample. The biofilm inhibitory activity was calculated by crystal violet staining degrees. In this study, S. aureus ATCC 6538 was used as test organism. Our results show that both water soluble and insoluble Hinoki cypress polysaccharide strongly inhibited biofilm formation. Whereas, green tea and sunset hibiscus root extract promoted biofilm. Xylitol showed a concentration dependent effect; high concentration (3 % and 5 %) of xylitol reduced biofilm while promoted biofilm formation at a concentration of 1 %. These results support that Hinoki cypress polysaccharide and xylitol have ability to suppress biofilm formation.

• Toxicological Research
• /
• v.33 no.1
• /
• pp.7-14
• /
• 2017

Didecyldimethylammonium chloride (DDAC) is used in many types of biocidal products including tableware, carpets, humidifiers, and swimming pools, etc. In spite of increased chances of DDAC exposure through inhalation, studies on the inhalation toxicity of DDAC are not common even though the toxicity of DDAC might be significantly higher if it were to be administered through routes other than the respiratory system. DDAC aerosols were exposed to Sprague-Dawley rats in whole body exposure chambers for a duration of 13 weeks. The Mass Median Aerodynamic Diameters of the DDAC aerosol were $0.63{\mu}m$, $0.81{\mu}m$, and $1.65{\mu}m$, and the geometric standard deviations were 1.62, 1.65, and 1.65 in the low ($0.11{\pm}0.06mg/m^3$), the middle ($0.36{\pm}0.20mg/m^3$) and the high ($1.41{\pm}0.71mg/m^3$) exposure groups, respectively. Body weight was confirmed to be clearly influenced by exposure to DDAC and mean body weight was approximately 35% lower in the high ($1.41{\pm}0.71mg/m^3$) male group and 15% lower in the high ($1.41{\pm}0.71mg/m^3$) female group compared to that of the control group. In the bronchoalveolar lavage fluid assay, the levels of albumin and lactate dehydrogenase had no effect on DDAC exposure. The lung weight increased for the middle ($0.36{\pm}0.20mg/m^3$) and the high ($1.41{\pm}0.71mg/m^3$) concentrations of the DDAC exposure group, and inflammatory cell infiltration and interstitial pneumonia were partially observed in the lungs of the middle ($0.36{\pm}0.20mg/m^3$) and the high ($1.41{\pm}0.71mg/m^3$) exposure groups. However, severe histopathological symptoms, including proteinosis and/or fibrosis, were not found. Based on the results of the changes in the body weight and lung weight, it is considered that the NOAEL (no-observed adverse effect) level for the 13-week exposure duration is $0.11mg/m^3$.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.2
• /
• pp.253-258
• /
• 2016

The $MnO_x-WO_3-TiO_2$ nanoscale powders were synthesized by sol-gel method in order to prevent the biological fouling on the ships and offshore structures. Powder characteristics and antifouling performance were investigated with respect to the crystalline, microstructure and surface property for application in self-polishing copolymer resins. The high antifouling activity of $TiO_2$-system biocide was attributed to its redox potential and soluble metal ions originating from tungsten oxides according to the improvements in the powder characteristics. Based on their physio-chemical characterizations, the specific surface areas of powders were about $90m^2/g$ and the grain size was in the region 100 ~ 150 nm. Powder characteristics and surface properties were improved by the addition of $WO_3$. Antifouling performance were analyzed according to their surface properties and static immersion tests to determine the effects of the $TiO_2$-system compounds. The surface of 2 wt. % added sample was clean for 5 month. This may be attributed to the ability of $MnO_x-WO_3-TiO_2$ powders to act as a promoter in antifouling agents.