• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1993.11a
• /
• pp.21-24
• /
• 1993

Many attempts have been made to use hydrogel as del ivory systems for various drug and vioactive materials to prolong and control their pharmacological activities. Rectal administration of drugs by using hydrogel bases, such as poloxamer ABA block copolymer (Pluronic F-127) gels, polyacrylic acid (Carbomer 934, 940, or 941) aqueous gels, and polyvilyl alcohol gels, have been reported on the preparation and potential suppository use of new gels(Eudragit L, Eudragit S, and Eudispert) that are block copolymers of methacrylic acid and methyl methacrylate. If) These hydrogel and xerogel preparations, especially Eudispert hv gels, show excellent staying and bioadhesive effects in the lower part of the rectum in rats and rabbits compared with those of polyethylene glycol (PEG)2000 and Witepsol H-15(or S-55) suppositories. Visual and optical microscopic observation of rectal membrances indicated no irritation or abnormality after administration of Eudispert hv tydrogel and xerogel.

• Journal of Pharmaceutical Investigation
• /
• v.28 no.2
• /
• pp.99-107
• /
• 1998

The objective of this study was to develop effective oral formulations of rhEGF for gastric ulcer healing using polycarbophil. hydroxypropylcellulose(HPC) and sucralfate as its bioadhesive bases. Cytoprotective effects of rhEGF, cell proliferation and differentiation. on the ulcers induced by ethanol or acetic acid in rats were studied. rhEGF release from HPC formulation was much faster than that from polycarbophil formulation. HPC formulation combined with small amount of sucralfate showed much slower release of rhEGF than only HPC base only. rhEGF preparations with bioadhesive polymers showed better effects on the healing of gastric ulcers than EGF solution when administered orally. When rhEGF preparations were administered at once and the animals were under starvation, polycarbophil formulation showed better effect on gastric ulcers than HPC formulation. Otherwise, when rhEGF preparations were given more than three times and the rats were fed normally, HPC formulation showed good healing efficacy of ulcers compared to polycarbophil formulation. rhEGF showed dose-dependent effect on the healing of both chronic and acute ulcers.

• Proceedings of the PSK Conference
• /
• 2000.10a
• /
• pp.263.3-264
• /
• 2000

• Biomolecules & Therapeutics
• /
• v.19 no.3
• /
• pp.357-363
• /
• 2011

In relieving local pains, ropivacaine has been widely used. In case of their application such as ointments and creams, it is difficult to expect their effects for a significant period of time, because they are easily removed by wetting, movement and contacting. Therefore, the new formulations that have suitable bioadhesion were needed to enhance local anesthetic effects. The effect of drug concentration and temperature on drug release was studied from the prepared 1.5% Carboxymethyl cellulose (CMC) (150MC) gels using synthetic cellulose membrane at $37{\pm}0.5^{\circ}C$. As the drug concentration and temperature increased, the drug release increased. A linear relationship was observed between the logarithm of the permeability coefficient and the reciprocal temperature. The activation energy of drug permeation was 3.16 kcal/mol for a 1.5% loading dose. To increase the skin permeation of ropivacaine from CMC gel, enhancers such as saturated and unsaturated fatty acids, pyrrolidones, propylene glycol derivatives, glycerides, and non-ionic surfactants were incorporated into the ropivacaine-CMC gels. Among the enhancers used, polyoxyethylene 2-oleyl ether showed the highest enhancing effects. For the efficacy study, the anesthetic action of the formulated ropivacaine gel containing an enhancer and vasoconstrictor was evaluated with the tail-flick analgesimeter. According to the rat tail-flick test, 1.5% drug gels containing polyoxyethylene 2-oleyl ether and tetrahydrozoline showed the best prolonged local analgesic effects. In conclusion, the enhanced local anesthetic gels containing penetration enhancer and vasoconstrictor could be developed using the bioadhesive polymer.

• Journal of Pharmaceutical Investigation
• /
• v.39 no.6
• /
• pp.437-443
• /
• 2009

To develop a topical bioadhesive formulation of clotrimazole for enhanced transdermal delivery, hydroxypropyl methylcellulose gel containing permeation enhancer was formulated and permeation studies were carried out. The release characteristics of the drug from the gel formulation were examined according to the receptor medium, drug concentration, and temperature. The rate of drug release from the gel increased with increasing drug concentration and temperature. The activation energy (Ea) of drug permeation, which was calculated from the slope of log P versus 1/T plots, was 14.41kcal/mol for a 1%(w/w) loading dose. The enhancer, such as saturated, unsaturated fatty acids, pyrrolidones, propylene glycol derivatives, glycerides, and non-ionic surfactants, were incorporated onto the gels to increase the amount of drug permeation into the skin. Among the enhancers used, polyoxyethylene 2-oleyl ether showed the highest level of enhancement. These results show that clotrimazole gels containing polyoxyethylene 2-oleyl ether could be used for the enhanced transdermal delivery of clotrimazole.

• Archives of Pharmacal Research
• /
• v.29 no.10
• /
• pp.928-933
• /
• 2006

Percutaneous delivery of NSAIDs has advantages of avoiding hepatic first pass effect and delivering the drug for extended period of time at a sustained, concentrated level at the inflammation site that mainly acts at the joint and the related regions. To develop the new topical formulations of pranoprofen that have suitable bioadhesion, the gel was formulated using hydroxypropyl methylcellulose (HPMC) and poloxamer 407. The effects of temperature on drug release was performed at $32^{\circ}C$, $37^{\circ}C$ and $42^{\circ}C$ according to drug concentration of 0.04%, 0.08%, 0.12%, 0.16%, and 0.2% (w/w) using synthetic cellulose membrane at $37{\pm}0.5^{\circ}C$. The increase of temperature showed the increased drug release. The activation energy (Ea), which were calculated from the slope of lop P versus 1000/T plots was 11.22 kcal/ mol for 0.04%, 10.79 kcal/mol for 0.08%, 10.41 kcal/mol for 0.12% and 8.88 kcal/mol for 0.16% loading dose from the pranoprofen gel. To increase the drug permeation, some kinds of penetration enhancers such as the ethylene glycols, the propylene glycols, the glycerides, the non-ionic surfactants and the fatty acids were incorporated in the gel formulation. Among the various enhancers used, propylene glycol mono laurate showed the highest enhancing effects with the enhancement factor of 2.74. The results of this study suggest that development of topical gel formulation of pranoprofen containing an enhancer is feasible.

• YAKHAK HOEJI
• /
• v.42 no.3
• /
• pp.290-295
• /
• 1998

To optimize the formulation of acetaminophen liquid suppository, the effect of additives on the physicochemical properties of liquid suppository base was investigated. The physi cochemical properties of P 407/P 188 (15/15%) (abbreviated in 15/15) and P 407/P l88 (15/20%) (abbreviated in 15/20) were measured after the addition of following additives; 2.5% acetaminophen as an active ingredient, vehicle components (5% ethanol, 5% propylene glycol, 5% glycerin), preservatives (0.1% sodium benzoate, 0,1% methylparahydroxybenzoate, 0.1% propylparahydroxybenzoate) and 1% of sodium chloride as an ionic strength controlling agent. Poloxamer gel was prepared with three different buffer solutions (pH 1.2, 4.0 and 6.8) and the physicochemical properties, gelation temperature, gel strength and bioadhesive force, were determined. In the results, the effect of additives on the physicochemical properties was dependent on their bonding capacities including hydrogen bonding and cross-linking bonding. Because the hydrogen-bonding capacities of acetaminophen, ethanol and propylene glycol were smaller than that of poloxamer, the binding force of poloxamer gel became weak by their putting in between poloxamer gel. Therefore, the gelation temperature (15/15, $35.7^{\circ}C$ vs 37.0, 39.4 $38.2^{\circ}C$; 15/20, $29.2^{\circ}C$ vs 31.2, 32.0, $30.3^{\circ}C$) increased, and gel strength (15/15, 4.03 see vs 2.72, 2.08, 3.12sec; 15/20, 300g vs 50, 50, 200g) and bioadhesive force (15/15, $6.8{\times}10^2\;dyne/cm^2$ vs 3.2, 6.0, $6.0{\times}10^2\;dyne/cm^2$; 15/20, $97.3{\times}10^2\;dyne/cm^2$ vs 11.1, 89.5, $92.0{\times}10^2\;dyne/cm^2$) decreased. Furthermore, the binding force of poloxamer gel became strong due to the hydrogen-bonding capacities of glycerin and the cross-liking bonding of sodium salt. Then, the gelation temperature (15/15, 35.0, $32.1^{\circ}C$; 15/20, 26.0, $21.0^{\circ}C$) decreased, and gel strength (15/15, 6.51 see, 300g; 15/20, 500, 650g) and bioadhesive force (15/15, 7.2, $81.6{\times}10^2\;dyne/cm^2$; 15/20, 112.3, $309.2{\times}10^2\;dyne/cm^2$) increased. The effect of pH on the physicochemical properties of poloxamer gel was dependent on the ingredients with which the buffer solutions were prepared. Poloxamer gels prepared with pH 1.2 and 4.0 buffer solutions had the increasing gelation temperature (15/15, 37.5, $38.1^{\circ}C$; 15/20, 33.1, $34.0^{\circ}C$) and the decreasing gel strength (15/15, 2.98, 3.81sec; 15/20, 200, 200g) and bioadhesive force (15/15, $7.0{\times}10^2dyne/cm^2$; 15/20, $74.0{\sim}88.1{\times}10^2dyne/cm^2$) owing to HCl. Poloxamer gel prepared with pH 6.8 buffer solutions had the decreasing gelation temperature (15/15, $27.2^{\circ}C$; 15/20, $22.3^{\circ}C$) and the increasing gel strength (15/15, 400g; 15/20, 550g) and bioadhesive force (15/15, $207.0{\times}10^2dyne/cm^2$; 15/20, $215.0{\times}10^2dyne/cm^2$) due to the cross-linking bonding of $NaH_2PO_4\;and\;K_2HPO_4$.

• Biomolecules & Therapeutics
• /
• v.16 no.3
• /
• pp.210-214
• /
• 2008

The pharmacokinetic parameters and bioavailability of pranoprofen from the gel were measured to determine the enhancing effect of octanoic acid on the transdermal absorption of pranoprofen in rats. 8 mg/kg of pranoprofen was administered from gel with octanoic acid (the enhancer group) or that without octanoic acid (the control group) via the transdermal route, and the results were compared with those obtained from the intravenously (0.5 mg/kg, IV group) or orally administered group (4 mg/kg, oral group). The AUC of the control, the enhancer, the IV, and the oral groups were $20.2{\pm}5.1$, $50.7{\pm}12.7$, $19.9{\pm}2.5$, and $70.5{\pm}17.6\;ug/ml{\cdot}h$ respectively. The average $C_{max}$ of the control and the enhancer group were $0.93{\pm}0.23$ and $2.82{\pm}0.71\;ug/ml$, respectively, and the mean $T_{max}$ of the control and the enhancer group was 7.00 h. The relative bioavailability of the transdermally administered pranoprofen gel containing octanoic acid was approximately 2.50 times higher than the control group, showing a relatively constant, sustained blood concentration with minimal fluctuation. This suggests that it might be feasible to develop a pranoprofen gel preparation containing an enhancer for the transdermal administration, which is more convenient dosage form than the oral dosage forms.