• Journal of Environmental Science International
• /
• v.27 no.3
• /
• pp.147-154
• /
• 2018

The purpose of this article is analyzing the impacts of seawater surface temperature rise on sea mustard yields of Goheung and Wando coast in Korea, with employing a panel data regression model. Our results show that there has been a negative impacts on sea mustard yields as seawater surface temperature continuously has been rising. Especially if the upward trend in seawater surface temperature since 2005 will be maintained in future, sea mustard yield is expected to decrease by 2.6% per year.

• Tribology and Lubricants
• /
• v.24 no.6
• /
• pp.368-373
• /
• 2008

This paper will investigate the friction characteristics of a 100m Hexagonal Array, Micro-scale Dimple Pattern, on bearing steel. These characteristics are researched by utilizing a pin-on-disk wear test machine, under various test conditions. The reduction of friction is a necessary requirement for the improved efficiency of this machine. As the speed increases, there is a decrease in the effect of the dimple of friction characteristic, with substantially little change to density. Conversely, as the load increases, the dimple pattern grows larger, resulting in a difference in the texture of these two components. At a dimple density of 10% the friction characteristic is easily demonstrated, with a consistent change in both speed and load.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.6
• /
• pp.34-40
• /
• 2014

Wood fibers for medium density fiberboard (MDF) was used in the filler layer of the white duplex board for increasing thickness and bulk of the board. The MDF fibers and the old corrugated container (OCC) furnish were refined, and mixed together to form paperboard. At optimum mixing ratios and refining degrees, stiffness and tensile strength of the MDF fiber-containing board were higher than those of the board with 100% OCC. It was found that there was possibility to reduced basis weight of the filler layer down to 90% of the all OCC furnish by judicious selection of the mixing ratio and the refining method of the MDF fibers. Drainage rate increase and potential drying energy savings were additional benefits.

• Journal of Sensor Science and Technology
• /
• v.21 no.5
• /
• pp.324-328
• /
• 2012

In the past a few decades, various kinds of cells have been examined in laboratories all over the world, and their interesting results have been expressed through various methods in journal publications. For a representative example, the increment or reduction of cell numbers during a bio-related experimental process has been demonstrated using the hazard ratio in survival analysis or in the form of a graph. In addition, the condition of cells such as their normality or abnormality would be indicated by the images of the cell nuclei or membranes treated with proper fluorescent labeling. However, the above methods seem to not be quantitative but rather qualitative assessments, which might be difficult to provide people with the eidetic understanding through parameters or numerical data. With adequate suggestions on any indices enabling the explanation for cell conditions, some analyses may be underestimated due to the lack of objectiveness caused by merely linguistic evaluation for the cell conditions, not numerally scientific interpretation. Therefore, in this study, we would suggest some indices enabling quantitative analysis on the cellular conditions.

• Proceedings of the KOSOMBE Conference
• /
• v.1993 no.05
• /
• pp.109-113
• /
• 1993

In this paper, we devised a simple portable digital recorder for a day life ECG signal recording. The system are consisted of ECG amp. part, signal conditioning part. A/D converter, data compression part and digital memory part. An ADPCM algorithm used at data compress part for 50% of data reduction. The maximum lengths of recording times take 3 hours in 1 mega byte memory.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2001.11a
• /
• pp.11-16
• /
• 2001

If microorganisms are injected into porous medium such as soils along with appropriate substrate and nutrients, soil pore size and shape are changed from the initial condition as a result of biofilm formation, which make hydraulic conductivity reduced. In this research, hydraulic conductivity reduction was measured after specific bacterium or fungus was inoculated into soil pore. Hydraulic conductivity was decreased to 10 % ∼ 1 % and maintained constant while substrate was provided. Under the adverse conditions such as no substrate, chemical solution permeation, and freeze-thaw cycles, hydraulic conductivity was increased 30∼50%. Hydraulic conductivity decrease of fungus-soil mixture was faster than that of bacterium-soil mixture. Fungus-soil mixture, however, was more sensitive to the adverse conditions.

• Imaging Science in Dentistry
• /
• v.35 no.2
• /
• pp.69-75
• /
• 2005

Purpose : To determine the clinical correlation of magnetic resonance imaging (MRI) findings of temporomandibular joint internal derangements. Materials and Methods : The MR images of 150 TMJs in 75 patients were analyzed. The clinical symptoms were pain in the preauricular area and masticatory muscles and TMJ sounds. Results : There was a statistically significant relationship between the MRI diagnoses of different types of disc displacements and clinical findings of pain, clicking, and crepitus. The risk of TMJ pain was increased when the disc displacement without reduction occurred at the same time in combination with the osteoarthrosis and effusion. Conclusion : Regardless of the results, the data indicate that each of these MR imaging variables may not be regarded as the unique and dominant factor in defining TMJ pain occurrence.

• Carbon letters
• /
• v.13 no.1
• /
• pp.48-50
• /
• 2012

Mass production of graphene-based materials, which have high specific surface area, is of importance for industrial applications. Herein, we report on a facile approach to produce thermally modified graphene oxide (TMG) in large quantities. We performed this experiment with a hot plate under environments that have relatively low temperature and no using inert gas. TMG materials showed a high specific surface area (430 $m^2g^{-1}$). Successful reduction was confirmed by elemental analysis, X-ray photoelectron spectroscopy, thermogravimetic analysis, and X-ray diffraction. The resulting materials might be useful for various applications such as in rechargeable batteries, as hydrogen storage materials, as nano-fillers in composites, in ultracapacitors, and in chemical/bio sensors.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.2
• /
• pp.121-127
• /
• 2008

Micro end-milling has been becoming an important machining process to manufacture a number of small products such as micro-devices, bio-chips, micro-patterns and so on. Despite the importance of micro end-milling, many related researches have given grand efforts to micro end-milling phenomenon, for example, micro end-milling mechanism, cutting force modeling and machinability. This paper strongly concerned actual problem, micro tool deflection, which causes excessive machining errors on the workpiece. To solve this problem, machining error prediction method was proposed through a series of test micro cutting and analysis of their SEM images. An iterative algorithm was applied in order to obtain corrected tool path which allows reducing machining errors in spite of tool deflection. Experiments are carried out to validate the proposed approaches. In result, remarkable error reduction could be obtained.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.6
• /
• pp.269-273
• /
• 2012

Ammonia decomposition over titanium carbides were investigated using eight different samples which have been synthesized by TPR (temperature-programmed reduction) method of titanium oxide ($TiO_2$) with pure $CH_4$. The resulting materials which were synthesized using wo different heating rates and space velocity exhibited the different surface areas. These results indicated that the structural properties of these materials have been related to heating rates and space velocity employed. The titanium carbides prepared in this study proved to be active for ammonia decomposition, and the activity changed with the particle size/surface area. These showed the relationship between ammonia decomposition activity and the different active species. Compared to molybdenum carbide, the titanium carbides were one order of magnitude less active, suggesting the correlation between the activity difference and the degree of electron transfer between metals and carbon in metal carbides.