• Journal of the Korean Wood Science and Technology
• /
• v.40 no.3
• /
• pp.204-211
• /
• 2012

In this study, fast pyrolysis of pitch pine (Pinus rigida) was performed in a fluidized bed reactor under the temperature ranges between 400 and $550^{\circ}C$ at the residence time of 1.9 sec. Essential pyrolytic products (bio-oil, biochar, and gas) were produced and their yield was clearly influenced by temperature. The maximum yield of bio-oil was observed to 64.9 wt% (wet basis) at the temperature of $500^{\circ}C$. As pyrolysis temperature increased, the yield of biochar decreased from 36.8 to 11.1 wt%, while gas amount continuously increased from 16.1 to 33.0 wt%. Water content as well as heating value of bio-oils were obviously sensitive to the pyrolysis temperature. The water contents in the bio-oil clearly decreased from 26.1 ($400^{\circ}C$) to 11.9 wt% ($550^{\circ}C$), with increasing the fast pyrolysis temperature, while their higher heating values were increased from 16.6 MJ/kg to 19.3 MJ/kg. According to GC/MS analysis, 22 degradation compounds were identified from the bio-oils and 10 compounds were derived from carbohydrate, 12 compounds were derived from lignin.

• Journal of the Korean Applied Science and Technology
• /
• v.22 no.2
• /
• pp.106-115
• /
• 2005

Bio-diesel as fatty acid methyl ester was derived from such oils as soybean, peanut and canola oil by lipase catalyzed continuous trans-esterification. So the activation of lipase(Novozym - 435) was kept to be up to 4:1, the limiting molar ratio of methanol to oil under one-step addition of methanol due to the miscibility of oil and methanol through the static mixer for 4hrs and the elimination of glycerol on the surface of lipase by 7wt% silica gel. Therefore the overall yield of fatty acid methyl ester from soybean oil appeared to be 98% at 50$^{\cdot}C$ of reaction temperature under two-steps addition of methanol with 2${\times}$2:1 of methanol to oil molar ratio at an interval of 5.5hrs, 7wt% of lipase, 24 number of mixer elements, 0.2ml/min of flow rate and 7wt% of silica gel.

• Tribology and Lubricants
• /
• v.31 no.5
• /
• pp.195-204
• /
• 2015

Several researches are focused on improving the value of fine chemicals based on biomass resources due to environmental and other concerns associated with the use of petroleum-based products. Therefore, the synthesis and application of estolides derived from plant-based waste oil materials and their application as lubricants and as processing oil for butyl rubber products have been studied. Four kinds of estolide were prepared with conversions of 71~92% over 24h using various vegetable oils, as determined by size exclusion chromatography (SEC) and nuclear magnetic resonance (NMR) spectroscopy. FT-IR spectroscopy determines the esterification of estolides using 2-ethylhexyl alcohol. The estolides have iodine values of 35~90, α-ester/α-acid ratios of 0.45~0.55, and total acid number of 114~134 mg KOH g^–1. Four ball wear tests show that the wear scar diameters (WSDs) of estolides as base oil significantly decreased to 0.328~0.494 mm, compared to WSDs of 0.735 and 0.810 mm of WSD for 150N and Yubase 6, respectively, as general base oil. Thus, the estolides have better wear resistance and satisfying design objectives for the engineering of a variety of lubricant base oils.

• Clean Technology
• /
• v.29 no.3
• /
• pp.163-171
• /
• 2023

Hydrogen has been gaining a lot of attention as a possible clean energy source that can aid in reaching carbon neutrality. Currently, hydrogen production has relied on the steam reforming of fossil fuels. However, due to the carbon dioxide emissions caused by this process, hydrogen production based on the steam reforming of bio-oil derived from biomass has been proposed as an alternative approach. In order to use this alternative approach efficiently, one of the key issues that must be overcome is that the complexity of bio-oil, which has a large molecular weight and diverse functional groups of hydrocarbons, promotes the catalytic deactivation of nickel-based catalysts. In this review, research efforts to improve nickel-based catalysts for the steam reforming of bio-oil have been discussed in terms of the active phase, support, and promoters. The active phases are involved in activating C-C and C-H bonds of high-molecular-weight hydrocarbons, and noble and transition metals can be utilized. In terms of the support and promoters, the catalytic deactivation of Ni-based catalysts can be inhibited by utilizing reactive lattice oxygen for support or by suppressing the acidity. The development of active and stable Ni-based reforming catalysts plays a critical role in clean hydrogen production based on bio-oils.

• Food Science and Biotechnology
• /
• v.15 no.3
• /
• pp.462-465
• /
• 2006

In order to extend the shelf life of sliced raw flatfish, the antimicrobial effects of natural essential oil from mustard and a mixture of ginger and mustard essential oils were tested at various temperatures. In addition, volatile components of the mixed essential oils were analyzed using gas chromatography and gas chromatography mass spectrometry. The viable cell counts of Vibrio parahaemolyticus treated with mixed essential oils from ginger and mustard was 0.7-1.3 log CFU/g lower than those of other treatments during storage at $5^{\circ}C$. During storage at $20^{\circ}C$, the viable cell counts of V. parahaemolyticus, V. vulnificus 01, and V. vulnificus 02 treated with the essential oils increased slightly from 6.53-6.64 log CFU/g at initial stages to 6.77-7.72 log CFU/g after 24-hr of storage, however they were 1.38-1.97 log CFU/g lower than those of the control group (8.74-9.10 log CFU/g). These results show that the growth of V. parahaemolyticus and V. vulnificus inoculated on sliced raw flatfish could be inhibited by treatment with natural essential oils from ginger and mustard at $5^{\circ}C$ of storage. However, the antibacterial effects of the essential oils on Vibrio species observed in this study were not sufficient to merit their use in sliced raw flatfish at temperatures exceeding $20^{\circ}C$.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.3
• /
• pp.531-542
• /
• 2012

The thesis covers the trend of research on bio-based polyurethane which is made from polyols derived mainly from plant oils and isocyanates. Castor oil is a triglyceride of ricinoleic acid containing hydroxyl group. Hydroxylation is done on the unsaturated bonds of the oils by the reactions of epoxidation/ring opening, hydroformylation/hydrogenation, ozonolysis/hydrogenation, and thiol-ene reaction. Polyols from hyperbranch, primary alcohol, polysaccharide have been studied to control the reactivity of the polyol and morphology of the microdomains. Besides, researches cover biodegradable polylactic acid polyol for medical use, fatty acid dimer polyol for the prevention of hydrolysis, and polyol with ionic group for water-borne polyurethane. Bio-based polyurethanes are being used in flexible and rigid foams, coatings, sealants, and elastomers.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.359-359
• /
• 2006

This study deals with development of new bio-based polymeric materials from epoxidized soybean oil (ESO). The curing of ESO in the presence of organophilic montmorillonite produced an oil polymer-clay nanocomposite ("green nanocomposite") showing flexible property. A green nanocomposite (oil polymer-silica nanocomposite) coatings were synthesized by an acidcatalyzed curing of ESO with 3-glycidoxypropyltrimethoxysilane. The curing of ESO in the presence of a biodegradable plastic, poly(caprolactone), produced a composite with semi-IPN structure. The mechanical properties of the composite was much superior to those of polyESO. These new oil-based materials have large potential for applications in various fields.

• Transactions of the Korean hydrogen and new energy society
• /
• v.26 no.5
• /
• pp.484-492
• /
• 2015

As our government is actively introducing the RPS (Renewable Portfolio Standards) as a national renewable energy obligation policy, power producers are using the various renewable energy to meet the RPS supply quota since 2012. Recently, it is appling to use power bio-fuel oil in bio-fuel oil demonstration project with power companies. In general, power bio-fuel oils are composed of mixture products of vegetable oil, animal fat, fatty acid ester and waste oil. It is already developing for a power plant as a renewable energy abroad. In Korea, it is studying a 100% combustion and blended combustion of heavy fuel oil and bio-fuel oil. In this study, we investigated fuel characteristics of mixed power bio-fuel oil and its emission performance. Especially, it was reduced emissions of bio-oil in industrial boilers due to bio-fuel properties as compare with fuel oil.

• Journal of Applied Biological Chemistry
• /
• v.42 no.1
• /
• pp.40-44
• /
• 1999

The in vitro antioxidative activities of the 33 plant-derived essential oils and 37 phytochemicals including 3 Mentha arvensis leaf-, 2 Thymus vulgaris leaf- and 2 Syzygium aromaticum flower-derived isolates were determined by the inhibition of linoleic acid autoxidation, the generation of superoxide anion and scavenging of DPPH radical. They were then compared to those of the widely used plant-derived antioxidants (pyrogallol and quercetin) and synthetic antioxidant BHT. At a concentration of 0.01%, potent antioxidative effect was observed in the essential oils from Cinnamomum cassia roots, Mentha arvensis leaves, Ginkgo biloba fruits, and Syzygium aromaticum flowers. Of the phytochemicals used, eugenol and isoeugenol at 0.01% showed potent antioxidative activity, and their activities were comparable to those of pyrogallol, quercetin, and BHT. The Cinnamomum root-, the Mentha leaf-, the Ginkgo fruit-, and the Syzygium flower-derived materials may be a good source for an alternative to the currently used antioxidants.

• Journal of Microbiology and Biotechnology
• /
• v.5 no.6
• /
• pp.364-369
• /
• 1995

Effect of two-phase culture on Mentha piperita cell growth and essential oil formation was investigated using shake flask and air-lift bioreactors. LiChroprep RP-B(RP-B) addition did not impair M. piperita cell growth, but resulted in stimulated formation of essential oils and increased ratios of extracellular oil to intracellular oil formation. However, the combined use of RP-B and chitosan elicitor was not synergistic. Volumetric productivity of essential oils in RP-B treated culture using cell-recycled air-lift bioreactor was $6.9\;\mu\textrm{g}/l{\cdot}day$ which was substantially higher than that obtainable from the control. Our results demonstrate the potential of a second phase to enhance overall productivity for M. piperita cell culture.