• 제목/요약/키워드: Bio Diesel

검색결과 161건 처리시간 0.024초

선박디젤기관에서 바이오디젤 폐식용유의 연소특성에 대한 실험적 연구 (Experimental Study on Combustion Characteristics of Biodiesel Waste Cooking Oil in Marine Diesel Engine)

  • 조상곤
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제39권4호
    • /
    • pp.381-386
    • /
    • 2015
  • 최근에 환경오염 문제와 대체에너지 문제에 많은 관심을 가지고 있다. 디젤기관은 세계적으로 연료의 경제성 때문에 사용이 증가할 것이다. 그러므로 선박용기관의 대기오염 문제도 여러 분야에서 큰 관심사가 되고 있다. 화석연료로 부터 배출되는 유해 배기가스를 줄이기 위하여 대체연료기술이 개발되고 있다. 이러한 신재생에너지의 바이오디젤연료는 기존 디젤연료를 대체할 친환경 에너지로 각광을 받고 있으며, 일정한 비율로 디젤연료와 혼합하면 기존 디젤기관에 개조 없이 사용가능하다. 본 연구에서 바이오디젤연료가 선박디젤기관의 연소특성에 미치는 영향을 분석하기 위하여 폐식용유로부터 제조된 바이오디젤유를 엔진에 적용하여 실험을 수행하였다. 폐식용 성분에는 세탄가와 점도가 높은 성분이 있고, 탄소함유량이 적으면서 산소함유량이 잔존하고 있다. 연구 결과 연료소비율은 증가하고, 압력, 압력상승율 및 열발생율은 감소하였다.

바이오디젤의 미세입자 배출특성 (Nano Particle Emission Charataristics of Biodiesel)

  • 송호영;이민호;김재권;정충섭
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2010년도 추계학술대회 초록집
    • /
    • pp.199.2-199.2
    • /
    • 2010
  • Biodiesels are well-known as alternative fuels. also we know that biodiesels increase NOx and reduce PM(Particulate Matter) by previous many studies. But PM in most these studies was considered about the mass. In this study, We have performed experimental test for PM and exhaust emission by mixed ratio of biodiesel in heavy duty diesel engine. PM was investigated by The nano particle number and the mass. The mass of PM was evaluated by using the standard gravimetric method, The number of PM was evaluated by using the EEPS(Engine Exhaust Particle Sizer), on the ESC(European Steady Cycle) mode. Sampled gas through dilutor was directly extracted from tail pipe and EEPS measured diluted exhaust gas. Biodiesel is made up of used cooking oil. Diesel as base fuel was sold on market and contains 2% biodiesel. The mass of PM was reduced 10% and the nano particle number was increased 5%. The particle number less than 40nm was increased, but the particle number more than 40nm is decreased.

  • PDF

바이오알코올 혼합연료에 따른 배출 특성 연구 (Study on Emission Characteristics Depending on Mixing Fuels of Bio-Alcohol)

  • 김신;김재곤;이민호;황인하;이정민
    • 한국수소및신에너지학회논문집
    • /
    • 제29권6호
    • /
    • pp.654-660
    • /
    • 2018
  • The dependence on global fossil fuels has been gradually reducing all over the world. Some countries which recognized the important of environmental values were joining to carry out international GHG goals. Our country has also participated with high targets (37% reduction compared to BAU 2030 years). So we need to supply materials of lower GHG value such as a bio-diesel. Bio-alcohol is one of the similar bio-fuels that can be reducing GHG. A lot of countries had tried to commercialize through various R&D for bio-alcohol. In this study, we analyzed the fuel characteristics of bio-alcohol fuel produced by domestic technology. And we evaluated a possibility to use as vehicle fuel through mixing of bio-alcohol and gasoline. The mixed fuels were satisfied with 2.3 wt% of oxygen content that is standard of the petroleum and petroleum alternative fuel business Act. We tried to evaluate a emission characteristic of vehicle by mixed fuel. In accordance with the results we tried to find a correlation between fuel and emission.

바이오디젤 연료온도에 따른 분무 및 열소특성에 관한 연구 (A Study on Sprny and Combustion Characteristics by Temperature of Biodiesel Fuel)

  • 백두성;이성욱
    • 한국자동차공학회논문집
    • /
    • 제16권1호
    • /
    • pp.152-157
    • /
    • 2008
  • The biodiesel becomes one of the favorite alternative fuel applied to diesel engines. This research aims to understand the physics of spray and combustion characteristics of a biodiesel fuel in a constant volume chamber. For spray visualization, biodiesel was injected into a combustion chamber and a high speed camera was applied at various combustion conditions. To investigate heat-release rates and flame propagations, spark was ignited on a hydrogen fuel for the premixed combustion and then biodiesel was injected directly. In addition, parametric study was made by various geometries of combustion chambers and temperatures of fuels and injection pressures. This technology may contribute to improve the performance of bio-diesel engine and reduce emissions in future.

바이오원유-에탄올/파일럿 디젤유 이종연료 혼소를 통한 디젤엔진의 연소 및 배출가스 특성에 관한 연구 (A Study on Combustion and Emission Characteristics of a Diesel Engine Fuelled with Pyrolysis Oil-Ethanol and Pilot Diesel)

  • 김민재;이석환;조정권;윤준규;임종한
    • 한국산학기술학회논문지
    • /
    • 제18권5호
    • /
    • pp.420-427
    • /
    • 2017
  • 최근 화석연료의 고갈, 지구온난화 그리고 환경오염이 세계적인 공공의 문제로 대두됨으로써 신재생에너지에 관한 연구들이 많이 진행되고 있다. 이러한 신재생에너지들 중 바이오연료는 다루기 쉬울 뿐만 아니라, 낮은 가격과 풍부한 자원성이 미래에 화석연료를 대체할 수 있는 잠재성을 가지고 있다. 바이오연료 중 본 연구에서 사용한 급속 열분해유는 폐목재나 억새, 갈대와 같은 비식용작물에서부터 추출되었고, 이는 무한한 자원성 때문에 디젤엔진에서 디젤유를 대체할 신재생에너지로 주목받고 있다. 하지만 열분해유는 낮은 세탄가, 높은 점도, 높은 산도 그리고 낮은 발열량으로 인해 디젤엔진에 직접적으로 적용하기가 어렵다. 따라서 이러한 낮은 물질적 특성을 개선하기 위해서 본 연구에서는 에탄올과 같은 알코올계 연료와 혼합하여 투입하였다. 알코올계 연료인 에탄올이 열분해유의 저장 및 보관성에도 도움을 줄뿐 아니라 점도를 낮춰주어 엔진에 적용하기 수월하게 만들기 때문이다. 열분해유-에탄올 혼합연료를 파일럿 분사한 디젤유 이후 분사하여 연소시켜 이때의 연소 및 배기특성에 대해 고찰해 보았고, 그 결과로 미연탄화수소와 일산화탄소는 증가하는 경향을 띄지만 NOx와 PM이 현저히 줄어든 결과를 확인할 수 있었다.

서로 다른 측쇄 구조를 가진 폴리(알킬 메타크릴레이트)계의 저온유동성 향상제 합성 (Synthesis of Poly(alkyl methacrylate)s Containing Various Side Chains for Pour Point Depressants)

  • 홍진숙;김영운;정근우;정수환
    • 공업화학
    • /
    • 제21권5호
    • /
    • pp.542-547
    • /
    • 2010
  • 디젤연료 및 바이오 디젤을 포함하는 디젤연료는 성분 내에 n-파라핀과 포화 지방산 메틸에스테르가 저온에서 결정화가 이루어져 연료의 저온 특성을 감소시키는 현상이 발생한다. 이러한 문제를 방지하기 위하여 많은 방법들이 알려져 있으며, 그 중에서 알킬 메타크릴레이트계 중합체가 저온유동특성을 향상시키는 첨가제로 많이 사용되고 있다. 본 연구에서는 LMA (lauryl methacrylate), SMA (stearyl methacrylate)를 각각 측쇄 구조가 다른 알킬 메타크릴레이트를 사용하여 70 : 30의 몰 비율로 라디칼 공중합체를 합성하였다. 합성된 공중합체의 구조는 $^1H$-NMR 및 FT-IR 스펙트럼으로 분석하였으며, GPC로 분자량을 측정하였다. 이 공중합체를 디젤연료에 500~1000 ppm, 바이오디젤을 5%, 20% 함유한 디젤연료(BD5 및 BD20)에 1000~10000 ppm을 각각 첨가하여 유동점, 구름점 및 저온필터막힘점 등의 저온유동특성을 조사하였다. 저온유동특성을 측정한 결과 BD5에서 SMA를 포함한 공중합체 $PSMAmR_2n$에서 첨가 전 대비 유동점 $15^{\circ}C$, 구름점 $6^{\circ}C$, 저온필터막힘점 $10^{\circ}C$ 강하되어 가장 우수한 결과를 나타냈다.

목재펠릿 도입에 따른 시설재배의 경제적.환경적 타당성 분석 -목재펠릿과 경유의 비교분석을 중심으로- (Economical and Environmental Feasibility of Cultivation under Structure Due to the Introduction of Bio-energy -Comparative Analysis of Wood Pellets and Diesel-)

  • 양정수;윤성이
    • 한국유기농업학회지
    • /
    • 제21권3호
    • /
    • pp.335-350
    • /
    • 2013
  • With the efforts to development of renewable energy technologies, and increasing awareness to environmental issues, the usage of wood pallets has been increasing every year since the introduction of wood pallet technology to the domestic market. until 2009, majority usage of pellet boiler was in the residential houses. In an effort to increase the distribution of wood pellet boiler to cultivation facilities with high usage of fuels, The Ministry of Agriculture and Forestry has launched a distribution project of wood pellet boiler for fuel usage as a part of the agricultural and fishery energy efficiency projects. Although only small number of farms with a heat-culturing facility have replaced from conventional boiler to pellet boiler. Although part of reason for low usage of pallet boiler is lack of understanding and information of it, the main reasons are high initial cost and uncertainty of its cost efficiency. Also, most people from agricultural industry don't realize it's significance in terms of environmental benefit due to lack of understanding in 'resource circulation' and 'adopting to climate change'. In this study, first, we did a cost-efficiency analysis of the farm which uses a diesel boiler to grow cucumber, tomato, paprika. Then we replaced the diesel boiler to a pallet boiler and measured its cost-efficiency again. By comparing the cost-efficiency of the diesel boiler with the pellet boiler, we analyzed the economic viability of pellet boiler. Then we analyzed viability of pallet boiler usage in terms of 'resource circulation' and 'adopting to climate change'. As a result of our analysis, we have found out that under the current system of government support, the energy usage varies depends of the types crops grown and the higher the energy use, the more cost efficient it is to use the pallet boiler. Also, it is economically viable to use the pallet boiler in terms of 'resource circulation' and 'adopting to climate change'.

선박용 디젤발전기에서 바이오연료의 연소 및 배기배출물 특성에 관한 연구 (저부하 영역 중심으로) (A study on characteristics of combustion and exhaust emissions on bio-diesel fuel in marine diesel generator engine (Low load centering))

  • 조상곤
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제39권7호
    • /
    • pp.716-721
    • /
    • 2015
  • 환경오염에 대한 심각성이 대두되면서 대기오염에 대한 규제가 강화되고 있다. 육상에서 사용하는 자동차 및 산업용 발전설비 뿐만아니라 선박용 디젤기관에서도 규제를 시행하고 있어, 대체연료로서 바이오연료에 대한 많은 연구가 진행되고 있다. 따라서 실습선의 발전기관에 직접 바이오연료를 적용하여 기초적인 연구를 하고자 한다. 다만 실습선 안전을 위해 바이오연료의 비율을 많이 하지 못하지만 그래도 실험실에서 하는 작은 기관보다는 대형이면서, 큰 출력기관의 상태를 알아보는 중요한 기초자료가 될 것이다. 선박디젤발전기에서 바이오연료가 연소특성 및 배기배출물특성에 어떤 영향을 미치는지 연구하였다. 그 주요한 결과를 요약하면 다음과 같다. 바이오연료는 물리적 화학적 성분이 디젤경유와 비슷하여 실용 선박기관에 사용이 가능함을 알 수 있었다. 그리고 연료소비율과 NOx는 약간 증가하였으나, 일산화탄소와 매연은 감소하는 경향이 확인되었다. 또한 연소압력은 디젤경유와 바이오연료의 사용에 따라 크게 변화하지 않음을 알 수 있었다.

몇가지 바이오 연료를 이용한 디젤기관의 성능 및 배기 배출물 특성 (Performance and Emissions Characteristics of a Diesel Engine with Some Bio-oil Fuels)

  • 나우정;조기현
    • Journal of Biosystems Engineering
    • /
    • 제25권6호
    • /
    • pp.471-480
    • /
    • 2000
  • 대체연료로서 바이오 연료의 디젤엔진에의 적합성을 파악하기 위하여 경유, 가온 미강유, 초음파 적용 가온 미강유, 미강유 메틸 에스테르, 폐식용유, 초음파 적용 폐식용유, 폐식용유 메틸 에스테를 14kW 예연소실식 디젤 엔진의 연료로 사용하여 그 성능과 배기배출물을 측정하였다. 시험에 사용한 바이오 연료들에 의해 엔진 분사 펌프의 조정이나 다른 부품의 개조를 하지 않고도 단기간 전부하 상태로 1,600~2,800 rpm 의 범위에서 엔진은 정상적으로작동하였다. 바이오 연료를 사용하였을 경우 전반적으로 엔진성능과 배기 배출물 특성에 있어서 경유를 사용하였을 경우와 비견할만 하였으며 특히 매우 낮은 농도의 $SO_2$와 매연을 배출하였다.

  • PDF