• Korean Journal of Food Science and Technology
• /
• v.23 no.2
• /
• pp.175-182
• /
• 1991

Hydroxypropylated starches were prepared by reaction of corn starch with propylene oxide and their physicochemical properties were compared with those of the native starch. Swelling power, solubility and water binding capacity increased with the increase of hydroxypropylation. The hydroxypropylation of corn starch significantly reduced the extent of digestion and iodine absorption. Starch molecules larger than $1.34{\times}10^7{\sim}$ decreased whereas molecules ranging from $1.34{\times}10^7{\sim}1.18{\times}10^5$ increased by hydroxypropylation. Granule size increased by hydroxypropylation but this did not significantly affect the granule surface appearance by SEM. The hydroxypropylation improved the solubility and water binding capacity of corn starch.

• Journal of Convergence for Information Technology
• /
• v.9 no.6
• /
• pp.13-18
• /
• 2019

This paper proposes efficient and secure two-way authentication protocol for binding update messages between mobile devices and home agents / correspondent nodes in IoT and Mobile IPv6 (MIPv6) environments with limited computing power and resources. Based on the MIPv6 message exchange, the proposed protocol satisfies both the authentication and the public key exchange optimized for both sides of the communication with minimum modification. In the future, we will carry out a performance analysis study by implementing the proposed protocol in detail.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2003.05a
• /
• pp.431-435
• /
• 2003

Because the Tissue Bound Tritium of food irradiates the organic tissues of a man during a longer time than the Tissue Free Water Tritium, we found the ratio of labile and bound hydrogen, which is the direct source of TBT concentration, in grain such as rice and barley. Tissue free water was extracted from rice and barley sampled, adjacent to Wolsung nuclear power plants of CANDU type, by freeze-drying. Tissue bound water was taken from some of the dried samples by high-pressure combustion. The other of the samples was washed by tritium-free water for 2-3 hours, and dried again by freeze-drying. Tissue bound water was taken again from some of the second dried samples by the combustion. The extracted tissue free and bound waters were distilled and TFWT and TBT concentrations of them were counted by a liquid scintillation counter. Through alternating washing, drying and combustion until the concentration of TBT would be constant, the tritium concentration existing as bound hydrogen was found. The ratios of labile and bound hydrogen of rice and barley were determined by TR concentration, initial TBT concentration and bound tritium concentration. The ratios of bound hydrogen of rice and barley were 0.55, 0.60 relatively.

• Journal of Korea Multimedia Society
• /
• v.10 no.11
• /
• pp.1460-1471
• /
• 2007

A 3-Dimensional engine in a mobile embedded device is divided into a C-based OpenGL/ES and a Java-based JSR184 which interprets and executes a byte code in a real-time. In these two standards, the JSR184 supporting Java objects uses more processor resources than an OpenGL/ES and thus has a constraint when it is used in an embedded device with a limited computing power. On the other hand, 3-Dimensional contents employed in existing personal computer are created by utilizing advantages of Java and secured numerous users in European market, due to the good quality in contents and extensive service in a commercial network, GSM. Because of the reason, a mobile embedded device used in a GSM network needs a JSR184 which can provide an existing Java-based 3-Dimensional contents without extra conversion processes, but the current version of Java-based 3-Dimensional engine has drawbacks in application to commercial products because it requires more computing power than the mobile embedded device. This paper proposes a binding technique with the advantages of Java objects to improve a processing speed of 3-Dimensional contents in limited resources of a mobile embedded device. The technique supports a JSR184 standard interface in the upper layer to utilize 3-Dimensional contents using Java, employs a different code-conversion language, KNI(Kilo Native Interface), in the middle layer to interface between OpenGL/ES and JSR184, and embodies an OpenGL/ES standard in the lower layer. The validity of the binding technique is demonstrated through a simulator and a FPGA embedding an ARM.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.3
• /
• pp.35-42
• /
• 2021

The research of amplifier have been actively conducted to replace the Traveling Wave Tube Amplifier (TWTA) in the mmWave. For Solid State Power Amplifiers (SSPA), which combine semiconductor-type devices to obtain high output, Low-loss, high-efficiency combination techniques are required to meet the required output as the output of a single relatively low device is relatively low. In this paper, we design and produce an 8-way waveguide combiner and a reflective loss of more than 20dB and a binding efficiency of 85% or more were identified. Field analysis calculates the critical power inside the combiner. It secured stable Power Ratings and built-in coupler for power monitoring to achieve miniaturization and light weight.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.527-532
• /
• 2014

Generator is the main equipment of a power plant that generates electric power. The line frequency is 60Hz, since that is operated at 3600rpm in fossil power plant. Therefore, the specific frequency 120Hz by the electromagnetic excitation force is generated inherently. If the looseness of stator at generator happens, abnormal sound that has 120Hz and the harmonic frequency is emitted from generator frame. In that case, binding of end-winding or re-wedging is needed for the reduction of sound level. In case of severe level of sound, belly band can be additionally installed at core. In this paper, the characteristics of generator sound is described and modal data is analyzed after installation of belly band.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.10a
• /
• pp.223-224
• /
• 2009

본 연구에서는 $Cl_2$/Ar 기반의 플라즈마 식각에 $N_2$가스를 첨가하여 ZnO 박막을 식각 하였을 때 관찰된 ZnO 박막의 식각 특성에 관하여 연구 하였다. ZnO 박막 식각 실험은 RF 800 W, bias power 400 W, 공정 압력 15 mTorr를 기준으로 하였으며 가스 혼합 비율로는 최적의 식각률을 보여주는 $Cl_2$/Ar=8:2 비율에서 실행하였다. 연구의 목적인 첨가 가스 $N_2$를 $Cl_2$ (80%)/Ar (20)%에 5 sccm 씩 첨가하여 20 sccm 까지 증가 시켜 실험 하였다. $N_2$ 가스가 15 sccm 첨가되었을 때 식각률 95.9 nm/min로 기존 $Cl_2$/Ar 기반의 플라즈마 식각보다 높은 식각률을 보여 주었으며 $N_2$ 가스 흐름 조절 외에도 공정 압력, RF power, bias power를 변경하며 실험하였다. 식각된 ZnO 박막의 표면은 최대 식각률을 보이는 공정 조건을 찾기 위해 surface profiler ($\alpha$-step)을 이용하여 식각률을 측정하였으며 ZnO 박막 표면의 화학적인 변화를 조사하기 위해 x-ray photoelectron spectroscopy (XPS)를 사용하였다. XPS 분석 결과 Zn $2p_{3/2}$ peak 가낮은 binding energy 쪽으로 이동한 것을 관찰 할 수 있었다. 또한 O 1s 의 스펙트럼을 분석한 결과 N-O bond와 O-H bond가 존재함이 밝혀졌다.

• KSBB Journal
• /
• v.24 no.4
• /
• pp.403-409
• /
• 2009

H2AX, a crucial component of chromatin, is implicated in DNA repair, cell cycle check point and tumor suppression. The aim of this study was to identify direct binding partners of H2AX to regulate cellular responses to above mechanisms. Literature reviews and bioinformatical tools were attempted intensively to find binding partners of H2AX, which resulted in identifying two potential proteins, breast cancer-1 (BRCA1) and BRCA1-associated RING domain 1 (BARD1). Although it has been reported in vivo that BRCA1 co-localizes with H2AX at the site of DNA damage, their biochemical mechanism for H2AX were however only known that the complex monoubiquitinates histone monomers, including unphosphorylated H2AX in vitro. Therefore, it is important to know whether the complex directly interacts with H2AX, and also which regions of these are specifically mediated for the interaction. Using in vitro GST pull-down assay, we present here that BRCA1 and BARD1 directly bind to H2AX. Moreover, through combinational approaches of domain analysis, fragment clonings and in vitro binding assay, we revealed molecular details of the BRCA1-H2AX and BARD1-H2AX complex. These data provide the potential evidence that each of the BRCA1 nuclear localization signal (NLS) and BARD1 BRCA1 C-terminal (BRCT) repeat domain is the novel mediator of H2AX recognition.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.7B
• /
• pp.628-640
• /
• 2004

The demand for next generation networks can be condensed into always-best-connected, ubiquitous, mobile, all-lP, and converged networks. IPv6 has been introduced for all-IP ubiquitous communications, and vehicles are coming to represent an important communication platform. In this paper. we propose various resource management schemes for in-vehicle mobile networks, which are adaptive to different hardware configurations. We focus on power and wireless bandwidth since they are critical resources for mobile communications. Based on the mobility characteristics of in-vehicle networks, we propose vehicle-aware power saving schemes. The main idea behind these power saving schemes is to adjust mobile router (MR) advertisement interval and binding lifetime. In addition, according to different wireless environments, we propose adaptive bandwidth management schemes using multihoming: best-connected MR selection based on location, and high-data-rate MR selection based on priority By mathematical analysis, it is shown that our schemes save power prominently for both the dormant nodes and active nodes. In addition, simulation results show that proposed multiple mobile router architecture outperforms previous simple redundant router architecture in preserving session and providing sufficient bandwidth.

• Korean Journal of Food Science and Technology
• /
• v.36 no.6
• /
• pp.879-884
• /
• 2004

Effects of soaking time and particle size on physicochemical properties of nonwaxy rice flour were investigated. Nonwaxy rice grains were soaked at $4^{\circ}C$ for 0, 1, 12, and 24 hr, dried at room temperature, and milled. Resulting flours were passed through 45-mesh ($<355\;{\mu}m$, IL45) and 100-mesh ($<150\;{\mu}m$, IL100) sieves and separated into $<40\;{\mu}m\;and\;40-100\;{\mu}m$ series. IL45 series showed higher amount of large particles ($40-100\;{\mu}m$) than IL100 series. As the soaking time increased, protein and ash contents decreased, and amylose content, water-binding capacity, swelling power, and solubity of nonwaxy rice flours increased. Swelling power and solubility of nonwaxy rice flours also increased between $65-85^{\circ}C$. Water-binding capacity, swelling power, and solubility of IL100 series were higher than those of IL45 series. 12 hr-soaked nonwaxy rice flour pastes showed higher peak viscosity and breakdown but lower setback and viscosity at 95 and $50^{\circ}C$ than 1 hr-soaked ones. X-Ray diffractograms of nonwaxy rice flours were not affected, whereas surface appearance was affected, by soaking time and particle size.