• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.32 no.2
• /
• pp.149-153
• /
• 2010

The purpose of this retrospective study was to evaluate relapse, comparing large and small maxillary advancements with four-plate rigid fixation and without bone grafting. All patients had skeletal class III malocclusion, and underwent bimaxillary surgery. Standardized cephalometric analysis by one examiner was performed on serial radiographs of 14 patients immediately before surgery, and within 1 week and at least 6 months postoperatively (mean 10 months). The group was divided into two subsets to determine whether the magnitude of relapse. In group 1 ($\leq$ 5 mm, n = 8), the average advancement was $4.0{\pm}0.9\;mm$, with a mean relapse of $0.1{\pm}0.5\;mm$. In group 2 (6-8 mm, n = 4), the average advancement was $6.8{\pm}0.9\;mm$, with a mean relapse of $0.7{\pm}0.4\;mm$. There was no statistical difference in the measured relapse among the groups. Maxillary advancement with a 1-piece Le Fort I osteotomy is a relatively stable procedure.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.46 no.6
• /
• pp.385-392
• /
• 2020

Objectives: This study evaluates soft tissue changes of the upper lip and nose after maxillary setback with orthognathic surgery such as Le Fort I or anterior segmental osteotomy. Materials and Methods: All 50 patients with bimaxillary protrusion and skeletal Class II malocclusion underwent Le Fort I or anterior segmental osteotomy with backward movement. Soft and hard tissue changes were analyzed using cephalograms collected preoperatively and 6 months postoperatively. Results: Cluster analysis on the ratios shows that 2 lines intersected at 4 mm point. Based on this point, we divided the subjects into 2 groups: Group A (less than 4 mm, 27 subjects) and Group B (more than 4 mm, 23 subjects). Also, each group was divided according to changes of upper incisor angle (≥4°=A1, B1 or <4°=A2, B2). The correlation between A and B groups for A'/ANS and Ls/Is (P<0.001) was significant; A'/A (P=0.002), PRN/A (P=0.043), PRN/ANS (P=0.032), and St/Is (P=0.010). Variation of nasolabial angle between the two groups was not significant. There was no significant correlation of vertical movement and angle variation. Conclusion: The ratio of soft tissue to hard tissue movement depends on the amount of posterior movement in the maxilla, showing approximately two times higher rates in most of the midface when posterior movement was greater than 4 mm. The soft tissue changes caused by posterior movement of the maxilla were little affected by angular changes of upper incisors. Interestingly, nasolabial angle showed a different tendency between A and B groups and was more affected by incisal angular changes when horizontal posterior movement was less than 4 mm.

• The korean journal of orthodontics
• /
• v.50 no.5
• /
• pp.324-335
• /
• 2020

Objective: To compare postoperative positional changes in the mandibular proximal segment between the conventional orthognathic surgery (CS) and the surgery-first approach (SF) using intraoral vertical ramus osteotomy (IVRO) in patients with Class III malocclusion. Methods: Thirty-eight patients with skeletal Class III malocclusion who underwent bimaxillary surgery were divided into two groups according to the use of preoperative orthodontic treatment: CS group (n = 18) and SF group (n = 20). Skeletal changes in both groups were measured using computed tomography before (T0), 2 days after (T1), and 1 year after (T2) the surgery. Three-dimensional (3D) angular changes in the mandibular proximal segment, condylar position, and maxillomandibular landmarks were assessed. Results: The mean amounts of mandibular setback and maxillary posterior impaction were similar in both groups. At T2, the posterior portion of the mandible moved upward in both groups. In the SF group, the anterior portion of the mandible moved upward by a mean distance of 0.9 ± 1.0 mm, which was statistically significant (p < 0.001). There were significant between-group differences in occlusal changes (p < 0.001) as well as in overjet and overbite. However, there were no significant between-group differences in proximal segment variables. Conclusions: Despite postoperative occlusal changes, positional changes in the mandibular proximal segment and the position of the condyles were similar between CS and SF, which suggested that SF using IVRO achieved satisfactory postoperative stability. If active physiotherapy is conducted, the proximal segment can be adapted in the physiological position regardless of the occlusal changes.

• The korean journal of orthodontics
• /
• v.39 no.1
• /
• pp.54-65
• /
• 2009

This paper describes the case of a 50-year-old female with a Class II malocclusion who presented with severe bimaxillary protrusion and generalized alveolar bone loss due to adult periodontitis. The treatment plan consisted of extracting both upper and lower first premolars and periodontal treatment. Anterior segmental osteotomy(ASO) of the mandible and upper anterior segment retraction using compression osteogenesis after peri-segmental corticotomy(Speedy orthodontics) was performed. Correct overbite and overjet, facial balance, and improvement of lip protrusion were obtained. However, a slight root resorption tendency was observed on the lower anterior dentition. The active treatment period was 9 months and the results were stable for 27 months after debonding. This new type of treatment mechanics can be an effective alternative to orthognathic surgery.

• Journal of The Korean Dental Society of Anesthesiology
• /
• v.11 no.1
• /
• pp.9-15
• /
• 2011

배경: 술 후 통증은 술 후 합병증의 발생가능성을 증가시키며 생체기능의 회복을 방해한다. 술 후 통증을 효과적으로 조절하기 위해선 통증의 정도를 객관적으로 평가하는 것이 필요하다. 술 후 통증은 수술의 침습도와 관련이 높을 가능성이 많다. 본 연구에서는 수술 침습도의 정도와 술 후 통증의 정도 사이의 상관관계를 확인하고자 한다. 방법: 총 153명의 환자를 수술의 침습도에 따라 4개의 그룹으로 나누었다(그룹 1: 악성종양 수술 (malignancy surgery), 그룹 2: 양악수술(bimaxillary surgery), 그룹 3: 양성 종양수술(benign cancer surgery) 그룹 4: 임플란트 & 골절 수술(implant & frature)) 수술이 끝나갈 무렵 fentanyl 700 ${\mu}g$, ketorolac 1,500 mg (총 용적 120 ml)가 포함된 자가통증조절장치를 정맥로에 연결하였다. 술 후 통증의 정도는 시각통증등급(visual analogue scale)을 이용하여 측정하였고 자가통증조절장치의 총 사용시간, 투여된 진통제의 양, bolus 투여 총 횟수를 측정하였다. 결과: 술 후 시각통증등급은 술 후 1일부터 3일까지 그룹 1, 2 군에서 유의하게 높았다. 또한 시각통증등급 3점 이상의 통증을 호소하는 환자의 비율 역시 그룹 1, 2 군에서 유의하게 높았다. 진통제 총 투여용량 및 자가로 주입한 진통제의 양 역시 그룹 1, 2군에서 3, 4 군에 비해 유의하게 높은 것을 확인하였다. 결론: 본 연구결과 외과적 수술의 침습도가 술 후 통증의 정도를 결정하는데 있어 중요한 요소임 을 확인하였다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.39
• /
• pp.15.1-15.7
• /
• 2017

Background: This study constructed a partial-least-square path-modeling (PLS-PM) model and found the pathway by which the postsurgical vertical dimension (VD) affects the extent of the final mandibular setback on the B point at the posttreatment stage for the skeletal class III surgery-first approach (SFA). Methods: This study re-analyzed the data from the retrospective study by Lee et al. on 40 patients with skeletal class III bimaxillary SFA. Variables were obtained from cone beam computed tomography (CBCT)-generated cephalograms. Authors investigated all variables at each time point to build a PLS-PM model to verify the effect of the VD on the final setback of the mandible. Results: From PLS-PM, an increase in $VD_{10}$ was found to decrease the absolute value of the final setback amount of the mandible, which reflects the postsurgical physiological responses to both surgery and orthodontic treatment, which, in turn, can be interpreted as an increase in postoperative mandibular changes. Conclusions: To resolve the issue of collinear cephalometric data, the present study adopted PLS-PM to assess the orthodontic treatment. From PLS-PM, it was able to summarize the effect of increased postsurgery occlusal vertical dimension on the increased changeability of the B point position at the posttreatment stage.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.38
• /
• pp.49.1-49.9
• /
• 2016

Background: The aim of this report is to present a new reference for aesthetic mandible surgery using three-dimensional cone-beam computed tomography-based treatment planning for orthognathic surgery which can be implemented in surgical planning and perioperative procedure. Methods: To make an objective standard for evaluating aesthetic mandibular outline, we make an aesthetic scoring criteria with consideration of asymmetry, broad mandibular border line, and prominent mandibular angle. Two maxillofacial surgeons and two orthodontists rated their aesthetical evaluation from 1 to 5. Experimental group consisting of 47 female and 38 male patients who had rotational orthognathic two-jaw surgery from 2010 to 2011 were chosen according to aesthetic scoring done by two maxillofacial surgeons and two orthodontists. A high aesthetic score (${\geq}16$) means the facial contour is symmetric, with no broad and narrow aesthetic mandible frontal profiles. Control A group consisted of ten female and ten male patients who had no orthognathic surgery experience and low aesthetic score (${\geq}10$). Control B group consisted of ten female and ten male patients who had no orthognathic surgery experience and had anaesthetic mandibular frontal profile and a high aesthetic score (${\geq}16$). The three-dimensional image of the patient was taken from dental cone-beam CT (DCT) scanning (experimental group and control A group: 6 months DCT after surgery, control B group: 1st visit DCT). Each DCT was reformatted to reorient the 3D image using 3D analyzing program (OnDemand3D, cybermed Inc, CA, USA). After selection of 12 landmarks and the construction of reoriented horizontal, vertical, and coronal reference lines, 15 measurements were taken in 3D analysis of frontal mandibular morphology. Afterwards, horizontal and vertical linear measurements and angular measurements, linear ratio were obtained. Results: Mean $Go^{\prime}_{Rt}-Me^{\prime}-Go^{\prime}_{Lt}$ angular measurement was $100.74{\pm}2.14$ in female patients and $105.37{\pm}3.62$ in male patients. These showed significant difference with control A group in both genders. Ratio of $Go^{\prime}_{Rt}-Go^{\prime}_{Lt}-Me^{\prime}$ length to some linear measurements (ratio of $Me^{\prime}-Cd^{\prime}_{Rt}Cd^{\prime}_{Lt}$ to $Me^{\prime}-Go^{\prime}_{Rt}Go^{\prime}_{Lt}$, ratio of $Me^{\prime}-Go^{\prime}$ to $Me^{\prime}-Go^{\prime}_{Rt}Go^{\prime}_{Lt}$, ratio of $Go^{\prime}_{Rt}-Go^{\prime}_{Lt}$ to $Me^{\prime}-Go^{\prime}_{Rt}Go^{\prime}_{Lt}$) showed significant difference with control A group in both genders. Conclusion: This study was intended to find some standard measurement of mandible frontal view in 3D analysis of aesthetic patient. So, these potential measurement value may be helpful for orthognathic treatment planning to have more aesthetic and perspective outcomes.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.5
• /
• pp.311-319
• /
• 2012

Purpose: The aim of this study is to evaluate the vertical changes of the lip and perioral soft tissue, following orthognathic surgery in skeletal class III patients by a cephalometric analysis of a cone beam computed tomography (CBCT). Methods: A total of 20 skeletal class III patients, who had bimaxillary surgery with Le Fort 1 osteotomy and bilateral sagittal split ramus osteotomy, were included in this study. The surgical plan for maxilla was posterosuperior impaction with the anterior nasal spine, as the rotation center. Further, the surgical plan for mandible was also posterosuperior movement. The soft tissue changes between lateral cephalogram and CBCT were compared. And the correlations between independent variables and dependent variables were evaluated. Results: There were no significant differences of the soft tissues changes between lateral cephalogram and CBCT. Upper lip philtrum length (SnLs), nasolabial angle increased and upper lip vermilion length (LsStms), lower lip length (StmiB'), lower lip vermilion length (StmiLi), lower lip philtrum length (LiB') and soft tissue lower facial height (SnMe') decreased after surgery. Change of SnLs (${\Delta}$SnLs) was influenced by vertical change of menton (${\Delta}$MeV), and change of LsStms (${\Delta}$LsStms) was influenced by upper lip thickness (ULT). Change of StmiLi' (${\Delta}$StmiLi') were influenced by preoperative overjet. Change of StmiB' (${\Delta}$StmiB') were influenced by preoperative overjet, vertical change of lower incisor (${\Delta}$L1V) and horizontal change of posterior nasal spine (${\Delta}$PNSH). Change of LiB' (${\Delta}$LiB') was influenced by ${\Delta}$L1V and ${\Delta}$PNSH. Change of SnMe' (${\Delta}$SnMe') was influenced by ${\Delta}$MeV, horizontal change of upper incisor (${\Delta}$U1H) and horizontal change of lower incisor (${\Delta}$L1H). ${\Delta}$Nasolabial angle was influenced by change of ULT (${\Delta}$ULT). Conclusion: Both soft tissues and hard tissues can be evaluated by CBCT. Posterosuperior rotation of maxillomandibular complex resulted in increase of upper lip philtrum length and nasolabial angle, while the upper lip vermilion length, lower lip philtrum length, lower lip vermilion length, and soft tissue lower facial height showed a decrease.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.37 no.6
• /
• pp.457-463
• /
• 2011

Introduction: This study evaluate the soft tissue changes to the upper lip and nose after Le Fort I maxillary posterosuperior rotational movement. Materials and Methods: Twenty Skeletal class III patients, who had undergone bimaxillary surgery with a maxillary Le Fort I osteotomy and bilateral sagittal split ramus osteotomy, were included in the study. The surgical plan for maxilla was posterosuperior rotational movement, with the rotation center in the anterior nasal spine (ANS) of maxilla. Soft and hard tissue changes were measured by evaluating the lateral cephalograms obtained prior to surgery and at least 6 months after surgery. For cephalometric analysis, four hard tissue landmarks ANS, posterior nasal spine [PNS], A point, U1 tip), and five soft tissue landmarks (pronasale [Pn], subnasale [Sn], A' Point, upper lip [UL], stomion superius [StmS]) were marked. A paired t test, Pearson's correlation analysis and linear regression analysis were used to evaluate the soft and hard tissue changes and assess the correlation. A P value <0.05 was considered significant. Results: The U1 tip moved $2.52{\pm}1.54$ mm posteriorly in the horizontal plane (P<0.05). Among the soft tissue landmarks, Pn moved $0.97{\pm}1.1$ mm downward (P<0.05), UL moved $1.98{\pm}1.58$ mm posteriorly (P<0.05) and $1.18{\pm}1.85$ mm inferiorly (P<0.05), and StmS moved $1.68{\pm}1.48$ mm posteriorly (P<0.05) and $1.06{\pm}1.29$ mm inferiorly (P<0.05). The ratios of horizontal soft tissue movement to the hard tissue were 1:0.47 for the A point and A' point, and 1:0.74 for the U1 tip and UL. Vertically, the movement ratio between the A point and A' point was 1:0.38, between U1 tip and UL was 1:0.83, and between U1 tip and StmS was 1:0.79. Conclusion: Posterosuperior rotational movement of the maxilla in Le Fort I osteotomy results in posterior and inferior movement of UL. In addition, nasolabial angle was increased. Nasal tip and base of the nose showed a tendency to move downward and showed significant horizontal movement. The soft tissue changes in the upper lip and nasal area are believed to be induced by posterior movement at the UL area.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.2 no.1
• /
• pp.39-44
• /
• 2006

Cerebral palsy(CP) is one of the most common motor disease, due to brain injury during fetal and neonatal development which results in neuromotor paralysis and associated neuromuscular symptoms. Features of CP include motor disability due to the lack of muscle control, often accompanied by sensory disorders, mental retardation, speech disorders, hearing loss, epilepsy, behavior disorders, etc. There are increasing chances of treatment of dental patients with cerebral palsy, as the occurrence of CP is increasing with the decrease in infant mortality and an increase in immature birth and premature birth and also, there is a trend to pursue of higher quality of life. Reports on the relationship between CP and maxillofacial deformity are uncommon, but it is well known that the unbalance and discontrol of the facial muscles, lip, tongue and the jaws leads to malocclusion and temporomandibular joint disorders, and statistics show that class 2 relationship of the jaws and open bite is frequently reported. However, it is difficult to perform maxillofacial deformity treatment, which consists of orthodontic treatment, maxillofacial surgery and muscle adaptation training, due to difficulties in communication and problems of muscle adaptation caused by difficulties in motor control which leads to a high recurrence rate. This case report is to trearment of maxillofacial deformity in CP patient. A 26 year old female patient came to the department with the chief complaint of prognathism of the mandible and facial asymmetry. According to the past medical history, she was diagnosed as cerebral palsy 1 week after birth, classified as GMFC, classII accompanied with left side torticollis. The patient's intelligence was moderate, and there were no serious problems in communication. For two years time, the patient underwent lingual frenectomy, pre-operation orthodontic treatment and then bimaxillary orthognathic surgery to treat mandibular prognathism and facial asymmetry followed by rehabilitatory exercise of facial muscle. After 6 months of follow up, there was a good result. This is to report to the typical signs and symptoms of DFD in CP patient and the limitation of the usual method of the treatment of DFD in CP patient with literature review.