• Journal of the Korean institute of surface engineering
• /
• v.45 no.6
• /
• pp.257-263
• /
• 2012

CrN/AlN multilayer coatings with various bilayer periods in the range of 1.8 to 7.4 nm were synthesized using a closed-field unbalanced magnetron sputtering method. Their crystalline structure, chemical compositions and mechanical properties have been investigated with Auger electron spectroscopy, X-ray diffractometry, atomic force microscopy, nanoindentation, scratch tests. The properties of the multilayer coatings varied strongly depending upon the magnitude of the bilayer period. The multilayer coating with a bilayer period of 1.8 nm showed the maximum hardness and an elastic modulus of approximately 37.6 and 417 GPa, respectively, which was 1.54 times higher than the hardness predicted by the rule of mixture from the CrN and AlN coatings. The hardness of the multilayer coating increased as the bilayer period decreased, i.e. as the rotation speed increased. The Hall-Petch type relationship, hardness being related to (1/periodicity)$^{-1/2}$, suggested by Lehoczky was confirmed for the CrN/AlN multilayer coatings with bilayer period close to the 5-10 nm range. With decreasing bilayer period, the surface morphology of the films became rougher and the critical load of films for adhesion strength gradually decreased.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.350-350
• /
• 2006

We investigated, via atomic force microscopy and transmission electron microscopy, the effect of shear force on the interfacial morphology of a reactive bilayer polymer system composed of PS-mCOOH and PMMAGMA. It has been observed that in the absence of oscillatory shearing the roughness of the interface increased with reaction period, while at large values of ${\gamma}_{0}\;and\;{\omega}$ it became less than that observed in the absence of oscillatory shearing. This observation may be attributable to the possibility that oscillatory shearing might have hindered the diffusion of polymer chains, which are located away from the interface, to the interface of the layers. However, the effect of ${\gamma}_{0}\;and\;{\omega}$ on the roughness of the interface of (PS-mCOOH)/(PMMA-GMA) bilayer is found to be quite different.

• Journal of Magnetics
• /
• v.10 no.2
• /
• pp.44-47
• /
• 2005

The oscillatory interlayer exchange coupling (IEC) has been shown in pinned $[CoFe/Pt(t_{pt})/CoFe]/IrMn$ multi-layers with perpendicular anisotropy. The period of oscillation corresponds to about 2 monolayers of Pt. The oscillatory behavior of IEC depending on the nonmagnetic metallic Pt thickness is thought to be related the antiferromagnetic ordering induced by IrMn layer. Oscillatory IEC as function of insulating NiO thickness has been observed in $[Pt/CoFe]_4/NiO(t_{NiO})/[CoFe/Pt]_4$ multilayers. The effect of N (number of bilayer repeats) upon the magnetic property of [Pt/CoFe]N/IrMn is also studied.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.5
• /
• pp.1317-1322
• /
• 2014

Membrane disruption by an antimicrobial peptide (AMP) was investigated by measuring the $^2H$ solid-state nuclear magnetic resonance spectra of 1-palmitoyl-$d_{31}$-2-oleoyl-sn-glycero-3-phosphatidylcholine (POPC_$d_{31}$) in mixtures of POPC_$d_{31}$/cholesterol and either magainin 2 or aurein 3.3 deposited on thin cover-glass plates. The line shapes of the experimental $^2H$ solid-state nuclear magnetic resonance (SSNMR) spectra were best simulated by assuming the coexistence of a mosaic spread of bilayers containing pore structures and a fasttumbling isotropic phase or a hexagonal phase. Within a few days of incubation in a hydration chamber, an isotropic phase and a pore structure were induced by magainin 2, while in case of aurein 3.3 only an isotopic phase was induced in the presence of a bilayer phase. After an incubation period of over 100 days, alignment of the bilayers increased and the amount of the pore structure decreased in case of magainin 2. In contrast with magainin 2, aurein 3.3 induced a hexagonal phase at the peptide-to-lipid ratio of 1/20 and, interestingly, cholesterol was not found in the hexagonal phase induced by aurein 3.3. The experimental results indicate that magainin 2 is more effective in disrupting lipid bilayers containing cholesterol than aurein 3.3.

• Journal of Pharmaceutical Investigation
• /
• v.21 no.3
• /
• pp.161-170
• /
• 1991

The storage stabilities of immunoliposomes incorporated with variable amounts of ganglioside $G_{M1}$ were investigated as a function of time. temperature. and composition by observing absorbance of visible light and calcein release. In the column chromatographe, the layer of unsaturated PE(dioleoylphosphatidylethanolamine : DOPE). unable to form stable liposomes at physiological temperature and pH, were formed when palmitoyl-immunoglobulin G(IgG) $(2.5{\times}10^{-4}\;mol/DOPE\;mol)$ added. The incorporation of ganglioside $G_{M1}$ into immunoliposome. enhanced the stabilities of bilayers during the extended period of storage. The turbidities of immunoliposomes coated with ganglioside $G_{M1}$ exhibited the maximum near 20 mol% $G_{M1}/DOPE$ mol. probably because of the disturbance of the bilayer characteristics, i.e., layer transition or reorientation of interaction sites. At low temperature. the higher stability was achieved than at elevated temperatures. After one week of storage. the redispersed liposomal solutions at lower temperatures maintained the original elution patterns in chromatography but broader distribution at elevated temperatures. During the storage, it is suggested the aggregation is the more dominant phenomena for liposomes kept at $5^{\circ}C$ than the fusion. while he fusion is at elevated temperatures.

• Journal of the Korean Vacuum Society
• /
• v.6 no.S1
• /
• pp.70-74
• /
• 1997

The study of the thickness dependence of the electron energy structure of Fe, Ni, Ti and Zr sublayers in Ni/Ti and Fe/Zr multilayers by using the experimental and computer simulated optical spectroscopy has been performed. A series of Ni/Ti and Fe/Ze multiayered films (MLF) with a bilayer period of 0.5 - 30 nm and constant (Ni/Ti) / different (Fe/Zr) sublayer thickness ratios were prepared by using computer-controlled double-pair target face-to-face sputtering onto a glass substrate at room temperature (RT) Computer simulation of the resulting optical properties of these MLF was carried out by solving of multireflection problem with a matrix method assuming either "sharp" interfaces resulting in rectangular depth profiles of the components or "mixed" (alloy-like) interfaces of variable thickness between pure-metal sublayers. Optical constants of pure bulk metals as well as equiatomic alloy interfaces were employed in these simulations. It was shown that the difference between experimental and simulated optical properties of the investigated MLF increases with decrease in sublayer thickness. This result allows to conclude that the electronic structures of sublayers below 4-5 nm thickness in mlf differ from the corresponding bulk metals.ponding bulk metals.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.1
• /
• pp.59-64
• /
• 2011

Degree of unsaturation in fatty acid molecules plays an important role in the formation of vesicles. Vesicle formation from C18 fatty acids with different amount of double bonds such as oleic acid, linoleic acid and linolenic acid with the incorporation of 1,2-dipalmitoyl-sn-glycerol-3-phosphoethanolamine-N-[methoxy(polyethylene glycol)-2000] (DPPE-PEG2000) have been examined by TEM. Critical vesicular concentrations (CVC) of the vesicle suspension are determined by turbidity and surface tension methods. The CVC of fatty acids increases when the amount of unsaturation in the alkyl chain increases. On the other hand, stability of vesicle suspension has been examined by using particle size and zeta potential at $30^{\circ}C$. There was a dramatic decrease in particle size measurement from mono-unsaturation to tri-unsaturation which could be due to the effect of fluidity in the membrane bilayer caused by different degree of unsaturation. The values of zeta potential for vesicles that were formed without the incorporation of DPPE-PEG2000 were in the range of -70 mV to -100 mV. It has been observed that the incorporation of DPPEPEG2000 to the vesicle reduces the magnitude of zeta potential. However, this phenomenon does not obviously seen in fatty acid vesicles formed by linoleate-linoleic acid and linolenate-linolenic acid. We therefore conclude that the addition of DPPE-PEG2000 does not effectively improve the stability of the linoleate-linoleic acid and linolenatelinolenic acid vesicle at pH 9.0 after the evaluation of their particle size and zeta potential over a period of 30 days. Although the vesicles formed were not stable for more than 10 days, they have displayed the potential in encapsulating the active ingredients such as vitamin E and calcein. The results show that the loading efficiencies of vitamin E are of encouraging value.

• Archives of Plastic Surgery
• /
• v.37 no.5
• /
• pp.600-606
• /
• 2010

Purpose: Although traditional and current treatment strategies may demonstrate success, persistence or recurrence of difficult-to-heal wounds remain significant problems. A novel product, Hyalomatrix$^{(R)}$ (Fidia Advanced Biopolymer, Abano Terme, Italy) is a bilayer of an benzyl esterified hyaluronan scaffold beneath a silicone membrane. The scaffold delivers hyaluronan to the wound, and the silicone membrane acts as a temporary epidermal barrier. We present the results obtained with Hyalomatrix$^{(R)}$ in the treatment of difficult-to-heal wounds. Methods: From November, 2008 to March, 2010, Hyalomatrix$^{(R)}$ has been used on total 10 patients with wounds that were expected difficult to heal with traditional and other current strategies. After average 37.4 days from development of wounds, Hyalomatrix$^{(R)}$ was applied after wound debridement. On the average, Hyalomatrix$^{(R)}$ application period was 17.6 days. After average 16.5 days from removal of Hyalomatrix$^{(R)}$, skin grafts was performed. Results: In all cases, regeneration of fibrous granulation tissues and edge re-epithelization were present after the application of the Hyalomatrix$^{(R)}$. And all of the previous inflammatory signs were reduced. After skin grafts, no adverse reactions were recorded in 9 cases. But in one case, postoperative wound infection occured due to a lack of efficient fibrous tissues. In this model, the Hyalomatrix$^{(R)}$ acts as a hyaluronan delivery system and a barrier from the external environments. In tissue repair processes, the hyaluronan performs to facilitate the entry of a large number of cells into the wounds, to orientate the deposition of extracellular matrix fibrous components and to change the microenvironment of difficult-to-heal wounds. Conclusion: Our study suggests that Hyalomatrix$^{(R)}$ could be a good and feasible approach for difficult-to-heal wounds. The Hyalomatrix$^{(R)}$ improves microenvironments of difficult-to-heal wounds, reduces infection rates and physical stimulus despite of aggravating factors.

• Archives of Plastic Surgery
• /
• v.37 no.4
• /
• pp.469-472
• /
• 2010

Purpose: Aplasia Cutis Congenita (ACC) is a rare disease characterized by the focal defect of the skin at birth, frequently involving scalp, but it may affect any region of the body. There are no etiology known but some conditions such as intrauterine vascular ischemia, amniotic adherences and viral infections are associated. The ideal treatment for the ACC is not known. Superficial and relatively small sized defects (< $3{\times}5\;cm$) may heal spontaneously and large defects related with risks of infection and bleeding may require aggressive surgical treatment. Hyalomatrix$^{(R)}$ is a bilayer of an esterified hyaluronan scaffold beneath a silicone membrane. It has been used as a temporary dermal substitute to cover deep thickness skin defect and has physiological functions derive from the structural role in extracellular matrix and interaction with cell surface receptor. This material has been used for the wound bed pre-treatment for skin graft to follow and especially in uncooperative patient, like a newborn, this could be a efficient and aseptic way of promoting granulation without daily irritative wound care. For this reason, using Hyalomatrix$^{(R)}$ for the treatment of ACC was preferred in this paper. Methods: We report a case of a newborn with ACC of the vertex scalp and non-ossified partial skull defect. The large sized skin and skull defect ($6{\times}6\;cm$) was found with intact dura mater. No other complications such as bleeding or abnormal neurologic sign were accompanied. Escharectomy was performed and Hyalomatrix$^{(R)}$ was applied for the protection and the induction of acute wound healing for 3 months before the split-thickness skin graft. During the 3 months period, the dressing was renewed in aseptic technique for every 3 weeks. The skin graft was achieved on the healthy granulation bed. Results: The operative procedure was uneventful without necessity of blood transfusion. Postoperative physical examination revealed no additional abnormalities. Regular wound management was performed in out-patient clinic and the grafted skin was taken completely. No other problems developed during follow-up. Conclusion: Hyalomatrix$^{(R)}$ provides protective and favorable environment for wound healing. The combination of the use of Hyalomatrix$^{(R)}$ and the skin graft will be a good alternative for the ACC patients with relatively large defect on vertex.