• Structural Engineering and Mechanics
• /
• 제22권5호
• /
• pp.541-562
• /
• 2006

This paper compares the performance of axially loaded concrete filled steel tube (CFST) columns cast using a conventionally vibrated normal concrete (NC) and a novel self-consolidating concrete (SCC) made with a new viscosity modifying admixture (VMA). A total of sixteen columns with a standard compressive strength of about 50 MPa for both SCC and NC were tested by applying concentric axial load through the concrete core. Columns were fabricated without and with longitudinal and hoop reinforcement (Series I and Series II, respectively) in addition to the tube confinement. The slenderness of the columns expressed as height to diameter ratio (H/D) ranged between 4.8 and 9.5 for Series CI and between 3.1 and 6.5 for Series CII. The strength and ductility of SCC columns were found comparable to those of their NC counterparts as the maximum strength enhancement in NC columns ranged between 1.1% and 7.5% only. No significant difference in strain development was found due to the presence of SCC or NC or due to the presence of longitudinal and hoop reinforcement. Biaxial stress development in the steel tube as per von Mises yield criterion showed similar characteristics for both SCC and NC columns. The confined strength ($f^{\prime}_{cc}$) of SCC was found to be lower than that of NC and $f^{\prime}_{cc}$ also decreased with the increase of slenderness of the columns. Analytical models for the prediction of confined concrete strength and axial strength of CFST columns were developed and their performance was validated through test results. The proposed models were found to predict the axial strength of CFST columns better than existing models and Code based design procedures.

• The Journal of Advanced Prosthodontics
• /
• 제11권1호
• /
• pp.1-6
• /
• 2019

PURPOSE. The purpose of this in vitro study was to evaluate the effect of surface grinding and polishing procedures using high speed zirconia diamond burs with different grit sizes on the phase transformation and flexural strength of zirconia. MATERIALS AND METHODS. Forty disc shape specimens ($15{\times}1.25mm$) with a cylindrical projection in the center of each disc ($1{\times}3mm$) were fabricated with 3Y-TZP (Prettau, Zirkonzahn, Italy). The specimens were divided into 4 groups (n=10) according to the grinding and polishing procedures: Control group - grinding (coarse-grit diamond bur), Group 1 - grinding (coarse-grit diamond bur) + polishing, Group 2 - grinding (fine-grit diamond bur) + polishing, and Group 3 - grinding (fine grit diamond bur). Each specimen was analyzed by 3D-OM, XRD analysis, and biaxial flexural strength test. RESULTS. Based on the surface morphology by 3D-OM images, polished specimens showed smoother surface and lower roughness value (Ra). In the result of XRD analysis, partial phase transformation from tetragonal to monoclinic zirconia occurred in all groups. Control group, ground with a coarse grit diamond bur, showed more $t{\rightarrow}m$ phase transformation and lower flexural strength than Groups 1 and 2 significantly. CONCLUSION. The flexural strength in all specimens after grinding and polishing showed over 500 MPa, and those were clinically acceptable. However, grinding with a coarse grit diamond bur without polishing induced the phase transformation and low strength. Therefore, surface polishing is required for the occlusal adjustment using a high speed zirconia diamond bur to reduce the phase transformation and to prevent the decrease of flexural strength of zirconia.

• 한국터널지하공간학회 논문집
• /
• 제15권6호
• /
• pp.547-557
• /
• 2013

전단응력에 의한 전단강도 및 모드 II 파괴인성은 이산화탄소 지중저장에서의 덮개암 및 주입층의 안정성 평가에 활용되는 중요한 인자들이다. 본 연구에서는 짧은 보 압축시험을 이용하여 코코니노 사암의 전단강도 및 모드 II 파괴인성을 측정하였다. 측정된 평균 전단강도는 23.53 MPa이며, 모드 II 파괴인성은 1.58 MPa${\surd}$m이다. 응력확대계수(stress intensity factor)는 변위외삽법(displacement extrapolation method)을 이용한 유한요소법으로 결정하였다. 또한 이축응력(biaxial stress)과 수분포화(water saturation)가 모드 II 파괴인성에 미치는 영향을 분석하였다. 그 결과 이축응력이 증가할수록 파괴인성도 증가하였고, 완전포화된 시험편의 파괴인성은 건조상태의 파괴인성보다 대략 11.4% 감소하였다.

• 콘크리트학회논문집
• /
• 제15권1호
• /
• pp.60-68
• /
• 2003

한국원자력연구소(KAERI)의 프로그램 일환으로 콘크리트 격납건물 벽체 부재의 half-thickness 모델을 대상으로 인장실험을 수행하였다. KAERI의 이번 실험연구 목적은 격납건물 내부에서 예기치 못한 사고로 인하여 극한 내압이 작용할 때 콘크리트 격납건물의 성능을 평가할 수 있는 실험적으로 규명된 해석방안을 마련하는데 있다. 여기에 수록된 실험으로부터 얻은 데이터는 콘크리트의 균열거동 및 철근/콘크리트 사이의 상호작용 등을 포함한 재료모델을 요하는 해석방법을 검증하는데 유용할 것이다. 주요 실험 변수는 콘크리트의 압축강도로써 2축 인장을 받는 프리스트레스트 콘크리트 패널 부재의 균열거동에 미치는 영향을 살펴보았다.

• 구강회복응용과학지
• /
• 제17권3호
• /
• pp.199-204
• /
• 2001

This study was to investigate the reused possibility of zirconia reinforced glass-ceramic(IPS Empress Cosmo ceramic) with sprue button in the flexure strength and fracture toughness. 40 disk-shaped ceramic specimens (20 specimens: as-pressed material; 20 specimens: reused material) with approximately 1.7 mm thickness and 15 mm diameter were prepared by "lost wax" technique. The remnants(sprue buttons) were used for repressing. The surface treatments for the discs were gradually abraded with 320, 800, 1200, and 2000 grit SiC sandpaper. The specimens were evaluated their flexure strength with the biaxial flexure jig(ball-on-three balls) and their fracture toughness with Vickers Indentation-microfracture test. The Weibull moduli were calculated for biaxial flexural strength. The mean flexure strength and fracture toughness of each group were $122.2{\pm}18.3MPa$, $1.00{\pm}0.09MPa{\cdot}m^{0.5}$ (as-pressed ceramics), and $122.2{\pm}20.3MPa$, $1.01{\pm}0.10MPa{\cdot}m^{0.5}$ (reused ceramics). There were no significant differences in the strength and the fracture toughness between the as-pressed and the reused IPS Empress Cosmo ceramic (P>0.05). This implied zirconia reinforced glass-ceramic(IPS Empress Cosmo ceramic) could be used one more time by reusing of sprue button in the flexure strength and fracture toughness.

• 구강회복응용과학지
• /
• 제37권3호
• /
• pp.111-122
• /
• 2021

목적: 5Y-ZP의 세가지 층 간 굽힘강도, 투과도를 비교하고 추가적인 소성이 미치는 영향을 연구하고자 하였다. 연구 재료 및 방법: 소결한 지르코니아 블록을 세가지 층에 따라 분리한 후 원형 디스크 시편을 제작하였다. 시편의 직경은 15.0 mm이며, 2축굽힘강도와 투과도를 측정하기 위한 시편의 두께는 각각 1.2 mm와 1.0 mm이다. 시편들을 추가적인 소성 횟수(0, 1, 3번)에 따라 세 군으로 분류한 후 추가적인 소성은 900℃ 이하의 온도에서 퍼니스를 사용하여 소성 횟수에 따라 시행하였다. 만능재료시험기와 자외선-가시광선 분광광도계를 사용하여 2축굽힘강도와 투과도를 측정하였다. 상의 변화를 관찰하기 위해 X선 회절 분석을 시행하였다. 측정값은 One-way ANOVA, Tukey HSD test를 통하여 분석하였다(α = 0.05). 결과: 층 간 2축굽힘강도는 유의한 차이가 없었지만(P > 0.05) 투과도는 유의한 차이가 있었다(P < 0.05). 절단 및 전이층은 1번의 추가적인 소성 후 굽힘강도가 유의하게 감소하였으며, 3번의 추가적인 소성 후에는 모든 층의 굽힘강도가 소성 전과 비교하여 유의하게 감소하였다. 몸체 층을 제외한 나머지 층들은 추가적인 소성 후에 투과도가 유의하게 감소하였다. 모든 그룹의 X선 회절 분석 결과는 유사하였다. 결론: 5Y-ZP의 세 층은 투과도의 차이만 존재하였다. 추가적인 소성은 각 층의 굽힘강도와 투과도에 다른 영향을 미쳤으나 상전이는 발견되지 않았다.

• 대한치과보철학회지
• /
• 제43권3호
• /
• pp.293-305
• /
• 2005

Statement of problems. Conventional feldspathic porcelain is used extensively as a restorative material and it is subjected to grinding and polishing during fabrication and delivery procedures. There is still considerable controversy concerning the best methods to achieve the strongest porcelain restorations after such adjustments. Purpose. The objective of this study was to investigate the effects of (1) overglazing, (2) selfglazing, and (3) fine polishing on the flexural strength and fracture toughness of feldspathic dental porcelain. Material and method. Ninety porcelain disks were prepared for flexural strength test and sixty porcelain disks were fabricated for fracture toughness test. Specimens were divided into three groups for each test as follows: 1) overglazed 2) self-glazed 3) polished. The flexural strength of feldspathic porcelains was determined by ring-on-ring biaxial flexural strength test. The fracture toughness values of three experimental groups were obtained by indentation fracture toughness test. Results. The flexural strength of overglazed group was significantly higher than that of selfglazed and polished group (P<0.05), while the difference between self-glazed and polished group was not significant (P>0.05). The fracture toughness values of overglazed and polished group were significantly higher than that of self-glazed group (P<0.05), while the difference between overglazed and polished group was not significant (P>0.05). Conclusions. This results supported the use of polishing as an alternative to glazing metal ceramic restorations, as it was not detrimental in flexural strength and fracture toughness. But, under the conditions of this study, overglazing was the ideal surface finishing method of feldspathic dental porcelain.

• 한국항공우주학회지
• /
• 제32권8호
• /
• pp.82-90
• /
• 2004

등방성의 2차원 단위 셀 형상을 지닌 세 종류의 심재-삼각형 심재, 육각형 심재와 starcell 심재-에 대하여 샌드위치 구조물 내에서의 응용과 관련된 기계적 특성을 연구하였다. 세 종류의 심재에 대하여 축 방향 Young 계수, 전단 계수를 계산하여 비교하고, 심재의 셀 벽을 압축 하중과 전단 하중을 받고 있는 판재로 가정하여 축 방향 압축 좌굴 강도와 전단 좌굴 강도를 산출하였다. 심재의 유연성을 나타내는 평면탄성계수를 비교하고 쌍축 굴곡 실험 (biaxial flexural test)을 실시하여 유연성을 측정하였다. 세 가지 심재 모두 축 방향으로 같은 강성을 가지고 있었으나, 삼각형 심재는 다른 두 종류의 심재에 비하여 낮은 강도를 나타내었고, starcell 심재는 다른 심재들에 비해 월등히 높은 유연성 을 나타내었다. 이러한 유연성은 starcell 심재가 곡면에 적용되는 샌드위치 구조물의 심재로서 응용될 수 있음을 보여주었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.163-170
• /
• 1999

Although the bulge forming technique is currently employed in commercial superplastic forming processes, the uniaxial tensile test is still the most commonly used method for the evaluation of the superplasticity of materials due to its simplicity in testing. However, the results obtained from the uniaxial tensile test can not be applied in analyzing the characteristics of the real parts formed in multi-axial stress state. In this paper, using the tensile test specimen obtained from the square cup manufactured by superplastic forming, tensile strength and elongation have been investigated according to the strain and cavity volume fraction. From the result of experiment, tensile strength and elongation are decreased according to the strain and cavity in Al-6%Cu-0.4%Zr alloy. On condition of uniaxial stress, cavity volume fraction is increased on linear according to the increasement of thickness strain. However, on condition of biaxial stress there are critical point( E t=1.5-1.6) that the slope, the ratio of cavity volume fraction and strain, have been changed. Therefore, cavity volume fraction is different with respect to stress condition, although the same strain.

• Steel and Composite Structures
• /
• 제22권6호
• /
• pp.1487-1505
• /
• 2016

This paper presents the results of an experimental study on the behavior of a new type of composite FRP-concrete-steel member subjected to bi-axial eccentric loading. This new type of composite member is in the form of concrete-filled square steel tube slender columns with inner CFRP (carbon fiber-reinforced polymer) circular tube, composed of an inner CFRP tube and an outer steel tube with concrete filled in the two tubes. Tests on twenty-six specimens of high strength concrete-filled square steel tube columns with inner CFRP circular tube columns (HCFST-CFRP) were carried out. The parameters changed in the experiments include the slenderness ratio, eccentric ratio, concrete strength, steel ratio and CFRP ratio. The experimental results showed that the failure mode of HCFST-CFRP was similar to that of HCFST, and the specimens failed by local buckling because of the increase of lateral deflection. The steel tube and the CFRP worked together well before failure under bi-axial eccentric loading. Ductility of HCFST-CFRP was better than that of HCFST. The ultimate bearing capacity of test specimen was calculated with simplified formula, which agreed well with test results, and the simplified formula can be used to calculate the bearing capacity of HCFSTF within the parameters of this test.