• 한국자동차공학회논문집
• /
• 제19권2호
• /
• pp.142-147
• /
• 2011

Compressed natural gas (CNG) is well known as one of the cleanest burning alternative fuels. Bi-fuel CNG vehicle can also run on gasoline or another fuel while dedicated natural gas vehicle is designed to run on natural gas only. Recently, increased attention has been focused on bi-fuel CNG/LPG taxi because of good fuel economy of CNG. A number of LPG taxis modified to CNG Bi-fuel vehicles are running in many cities. In this paper, the emissions characteristics of in-use passenger cars running on CNG and LPG were investigated. Chassis dynamometer test was used to measure exhaust emissions from an in-use fleet of 5 cars. Exhaust emissions were collected for CVS-75 driving mode. The test results showed that for CNG fuel mode, CO, $CO_2$ and NMHC emissions decreased to 9%, 12% and 14% respectively, and $CH_4$ and $NO_x$ emissions increased to 317% and 47% respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권5호
• /
• pp.632-637
• /
• 2010

천연가스는 메탄을 주성분으로 하는 청정한 대체연료로 자동차나 트럭 등에 압축천연가스와 액화천연가스 형태로 사용할 수 있다. 그리고, 천연가스만을 사용하는 전소엔진과 가솔린 및 천연가스를 동시에 사용할 수 있는 겸용엔진이 있으며, 특히, 겸용엔진의 경우 두가지 연료를 동시에 사용할 수 있는 것으로 정의할 수 있다. 본 연구에서는 선박용 가솔린 시스템을 인젝터, 레귤레이터, 연료탱크 및 전자제어장치로 구성된 압축 천연가스 겸용시스템으로 전환시켜 연료시스템과 동력값을 비교하였다. 그 결과, 천연가스엔진의 경우 적은 배출가스를 나타내었으며 최대동력은 가솔린엔진과 비교 약 7%정도 감소함을 확인할 수 있었다.

• 한국수소및신에너지학회논문집
• /
• 제28권3호
• /
• pp.273-278
• /
• 2017

In this paper, a fuel cell battery charger system, which is capable of bi-directional power transmission without built in battery, has been designed and fabricated. Performance and states of the notebook battery in bi-directional power transmission using the manufactured system have been tested. Before initializing the fuel cell charging system for 1 minute, the system received 10 W of electric power from notebook battery. Then the fuel cell charging system has been normal charging to notebook battery by 50 W. As a result of the experiment, the state of the notebook battery discharged less than 5% at the initial charging time, but then it has been charged. This results proves bi-directional power transmission in notebook computers increase the availability of fuel cell chargers.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권3호
• /
• pp.351-359
• /
• 2010

Bi-fuel system in a spark ignition engine (SIE) is a rising phenomena in today's automobile technology. In a gasoline driven vehicle, alternatively adoption of compressed natural gas (CNG) could be used as a potential substitute to meet the energy requirement and this is possible by some minor changes in the hardware of the existing engine. Gasoline engine is widely used in the passenger cars, light, medium and heavy duty vehicles but the consumption status of the petroleum is decreasing worldwide and at the same time environmental pollution from automobiles is seriously establishes as a threat for every nation in respect to global warming and climate changes. Now-a-days most vehicles operate using CNG for its popularity stems, clean burning properties and cost effective solution compared to other alternative fuels. It refers as a good gaseous fuel because of its high octane number and self ignition temperature. Though the power output is slightly lesser than the gasoline fuel; its thermal efficiency is better than the gasoline for the same SIE. The research paper highlights the reduction of CO, reasonable outcomes of HC emissions with minor increase in $NO_x$ emissions compared with the gasoline fuel to bi-fuel mode in the SIE that meets the emission challenges.

• 한국분무공학회지
• /
• 제19권1호
• /
• pp.40-46
• /
• 2014

Recently rise in oil prices feet the burden on not only diesel vehicle driver but also LPG vehicle driver, and get interested in various way to reduce fuel costs. In this study discuss on exhaust emissions characteristics on driving cycle mode and ignition advance condition change of CNG/LPLI Bi-Fuel vehicle. Experimental test was performed by changing the conditions of fuel (LPG/CNG), spark advance (Base, $10^{\circ}CA$, $15^{\circ}CA$), and driving mode (FTP-75, HWFET, and NEDC). In case of CO emission, in the order of CNG Base, CNG S/A10, S/A15 condition are average reduced -21%, -35%, -29% respectively compared to LPG fuel. The active emission reduction from the initial engine start, spark retard is likely to be beneficial in catalyst warm-up and improve combustion stability rather than spark advance.

• 한국기계기술학회지
• /
• 제13권3호
• /
• pp.39-47
• /
• 2011

In a bi-fuel engine using gasoline and LPG fuel, with the current ignition timing for gasoline being used, the optimum performance could not be taken in LPG fuel supply mode. The ignition timing in LPG fuel mode must be advanced much more than that of gasoline mode for the compensation of its higher ignition temperature. The purpose of this study is to investigate how the ignition spark timing conversion influences the engine performance of LPG/Gasoline Bi-Fuel engine. In order to investigate the engine performance during combustion, engine performance are sampled by data acquisition system, for example cylinder pressure, pressure rise rate and heat release rate, while change of the rpm(1500, 2000, 2500) and the ignition timing advance($5^{\circ}$, $10^{\circ}$, $15^{\circ}$, $20^{\circ}$). As the result, between 1500rpm, 2000rpm and 2500rpm, the cylinder pressure and pressure rise rate was increased when the spark ignition was advanced but pressure rise rate at $20^{\circ}$ was smaller value.

• 한국가스학회지
• /
• 제19권6호
• /
• pp.34-39
• /
• 2015

최근 차량용 에너지의 소비는 대부분 화석연료로부터 사용된다. 기존 화석 연료를 사용하는 자동차보다 친환경적이며 저렴하고 재생이 가능한 연료의 요구증대로 대체연료 자동차산업이 강조되고 있다. 오늘날 고옥탄가와 높은 자기발화온도 특징을 가지고 있는 천연가스는 저렴한 비용, 기존 화석연료보다 풍부한 매장으로 기존 스파크 점화엔진인 가솔린엔진의 대체에너지로 간주되고 있다. 본 연구는 기존 2리터 가솔린 엔진에 CNG 가스 분사시스템을 장착하여 전소 및 혼소 연료분사시스템을 설치하였다. 또한 CNG전소 및 가솔린/CNG 혼소차량의 ECU 제어전략을 최적화 하였다. 혼소차량에 대하여 NEDC모드 주행결과 가솔린 차량 대비 혼소차량의 CO2 저감율을 16%확인하였다. 또한 CO와 HC의 배기가스 배출량은 가솔린 차량과 동등한 수준을 확보하였다. 하지만 NOx의 배기가스 배출수준은 증가된 현상을 확인할 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제27권1호
• /
• pp.117-123
• /
• 2003

In a bi-fuel engine using gasoline and LPG fuel, with the current ignition timing for gasoline being used, the effective performance could not be taken in LPG fuel supply mode. The ignition timing in LPG fuel mode must be advanced much more than that of gasoline mode for the compensation of its lower flame speed, due to engine torque drop. This study aims to develop the control system for ignition spark timing conversion which is composed of hardwares and control algorithm for gasoline/LPG engine. We propose the control system which can advance the ignition spark timing in LPG fuel mode more than used in gasoline fuel mode. The advance of ignition timing is achieved by change of the ignition dwell time of coil igniter. The engine torque and F/E(Fuel-Economy) in LPG fuel mode are measured to evaluate the difference of engine performance between before and alter changing ignition spark timings. The engine torque and F/E are increased respectively, which proves the developed control system is effective so much for gasoline and LPG bi-fuel engine.

• 한국분무공학회지
• /
• 제19권1호
• /
• pp.33-39
• /
• 2014

Due to persist of high oil prices, LPG price stabilization and CNG modification project will be conducted. Present study describes the fuel efficiency and $CO_2$ emission characteristics on driving cycle mode and ignition advance condition change of CNG/LPG Bi-Fuel vehicle. In case of LPG Base and CNG Base condition, considerable $CO_2$ emissions are generated within range of high acceleration on FTP-75 and HWFET driving mode. However previous phenomena does not appear in CNG fuel $10^{\circ}CA$ and $15^{\circ}CA$ spark advance condition. As a result of analyzing the experimental data CNG $S/A10^{\circ}CA$, CNG $S/A15^{\circ}CA$, CNG Base, and LPG Base sequentially measured high fuel economy and low $CO_2$ emission characteristics.

• 전력전자학회논문지
• /
• 제18권1호
• /
• pp.45-53
• /
• 2013

Fuel cell power system is one of the most promising energy source for the alternative energy because it has unique advantages such as high energy density, no power drop during operation, and feasible to make compact size. However, due to very low response time, fuel cell is difficult to correspond to drastic load changes and start-up operation. For solving these problem, fuel cell power system must include energy storage device such as Li-Poly battery or super capacitor. Therefore, bi-directional DC-DC converter must be required for this storage device and fuel cell-PCS control. This paper presents a design and modeling of the bi-directional DC/DC converter. Firstly, we present modeling the boost and buck mode of the bi-directional converter through both PWM switch model and state space averaging technique. Secondly, in order to minimize output ripple and transient response overshoot, we have two identical DC-DC converters interleaved and adopt two-loop voltage-current controller. The proposed bi-directional DC-DC converter's modeling method and control design have been verified with computer simulation and experimentation.