• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.8
• /
• pp.850-856
• /
• 2009

A new type bi-directional damper using a tuned liquid column damper(TLCD) and a tuned sloshing damper(TSD) is introduced in this study. Two dampers are usually needed to reduce wind-induced responses of tall buildings since they are along and across wind ones. The proposed damper has the advantage of controlling both responses with one damper. One of objectives of this study is to derive analytical dynamics to investigate coupled effects due to TLCD and TSD. Another objective is to address the effect of coupled control force due to TLCD and TSD on the dynamic characteristic of the damper based on analytical dynamics. Shaking table test is undertaken to experimentally grasp dynamic characteristics of the damper under white noise excitation. Its dynamic characteristic is expressed by the transfer function from the shaking table acceleration to the control force generated from the damper. Finally, its design parameters are identified based on the coupled dynamics, which include the mass ratio of horizontal liquid column to total liquid for a TLCD, the participation factor of the fundamental liquid sloshing for a TSD and damping ratio for both cases.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.spc3
• /
• pp.228-234
• /
• 2012

This paper presents the algorithm of the compensation of the grid current distortion caused by the grid voltage unbalance and distortion in 3-phase bi-directional DC to AC inverter. Usually 3-phase grid system has unbalance and distortion because of connecting 1-phase and non-linear load with 3-phase load using same input node. Controlling 3-phase inverter by general method under the unbalanced and distorted grid voltage, the grid current has distortion. This distortion of the grid current cause the grid voltage distortion again. So, it need to control the grid current balanced and non-distorted, even the grid voltage gets unbalanced and distorted. There are some complex method to compensate the gird current distortion. it sugest simple method to solve the problem. PSIM simulation is used to validate the proposed algorithm.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.8
• /
• pp.36-41
• /
• 2011

In multiple antenna systems, spatial facing correlation causes a significant degradation in performance. In this work, a method for reducing the sensitivity to spatial fading correlation through the bi-directional use of spatial resources is investigated. Firstly, the concept of bi-directional use of spatial resources is introduced. Then, the ability of this technique to reduce the sensitivity to spatial fading correlation is then shown through an analysis of the number of usable eigenmodes (UEMs). This system is found to efficiently reduce the sensitivity to spatial fading correlation.

• Structural Engineering and Mechanics
• /
• v.53 no.5
• /
• pp.957-979
• /
• 2015

The present paper investigates the influence of the orientation of the ground-motion reference axes, the seismic incident angle and the seismic intensity level on the inelastic response of asymmetric reinforced concrete buildings. A single storey asymmetric building is analyzed by nonlinear dynamic analyses under twenty bi-directional ground motions. The analyses are performed for many angles of incidence and four seismic intensity levels. Moreover three different pairs of the horizontal accelerograms corresponding to the input seismic motion are considered: a) the recorded accelerograms, b) the corresponding uncorrelated accelerograms, and c) the completely correlated accelerograms. The nonlinear response is evaluated by the overall structural damage index. The results of this study demonstrate that the inelastic seismic response depends on the orientation of the ground-motion reference axes, since the three individual pairs of accelerograms corresponding to the same ground motion (recorded, uncorrelated and completely correlated) can cause different structural damage level for the same incident angle. Furthermore, the use of the recorded accelerograms as seismic input does not always lead to the critical case of study. It is also shown that there is not a particular seismic incident angle or range of angles that leads to the maximum values of damage index regardless of the seismic intensity level or the ground-motion reference axes.

• Structural Engineering and Mechanics
• /
• v.67 no.4
• /
• pp.417-425
• /
• 2018

The main aim of this paper is to investigate the bending of Euler-Bernouilli nano-beams made of bi-directional functionally graded materials (BDFGMs) using Eringen's non-local elasticity theory in the integral form with compare the differential form. To the best of the researchers' knowledge, in the literature, there is no study carried out into integral form of Eringen's non-local elasticity theory for bending analysis of BDFGM Euler-Bernoulli nano-beams with arbitrary functions. Material properties of nano-beam are assumed to change along the thickness and length directions according to arbitrary function. The approximate analytical solutions to the bending analysis of the BDFG nano-beam are derived by using the Rayleigh-Ritz method. The differential form of Eringen's non-local elasticity theory reveals with increasing size effect parameter, the flexibility of the nano-beam decreases, that this is unreasonable. This problem has been resolved in the integral form of the Eringen's model. For all boundary conditions, it is clearly seen that the integral form of Eringen's model predicts the softening effect of the non-local parameter as expected. Finally, the effects of changes of some important parameters such as material length scale, BDFG index on the values of deflection of nano-beam are studied.

• Journal of The Korean Association of Information Education
• /
• v.2 no.2
• /
• pp.252-259
• /
• 1998

Vehicle navigation systems employ a certain route planning algorithm that provides the shortest path between the starting point and the destination point. The performance of a given route planning algorithm is measured through the degree of optimal route selection and the time cost to complete searching an optimal path. In this paper, various route planning algorithms are evaluated through computer simulation based on a real digital map database. Among those algorithms evaluated in this paper, the Modified Bi-directional A${\ast}$ algorithm is found to be the best algorithm for use in vehicle navigation systems.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.7
• /
• pp.612-619
• /
• 2016

In this paper, a dual band electrical beam tilting array antenna with bi-directional directivity is designed. Radiating element operates at dual-resonance frequencies and is designed as planar dipole using PCB. In order to tilt the main beam, the phase delay line is designed by use of only the phase shifting line of a $50\Omega$ microstrip line for broadband. The designed antenna has tilting angle of $0^{\circ}$ to ${\pm}8^{\circ}$. For validation of the designed antenna specification, the array antenna is fabricated and the performances are measured. Comparison between theory and experiment shows good agreement.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.2
• /
• pp.409-415
• /
• 2012

Recently in industry communication, the efforts that use robot and automation system increased by cooperation with optical communication and industrial Ethernet. In this paper, in order to solve the problem that total network blocking when network fault happens and wiring problem of optical cable, which were big serious disadvantage in industrial optical network systems, we propose bi-directional optical EtherCAT communication technique based on single optical core, which applying WDM method. We describe the content for implementation of WDM bi-directional optical EtherCAT communication module and performance evaluation to verify the performance of related technology as a whole.

• Structural Engineering and Mechanics
• /
• v.63 no.2
• /
• pp.161-169
• /
• 2017

In this paper, using consistent couple stress theory and Hamilton's principle, the free vibration analysis of Euler-Bernoulli nano-beams made of bi-directional functionally graded materials (BDFGMs) with small scale effects are investigated. To the best of the researchers' knowledge, in the literature, there is no study carried out into consistent couple-stress theory for free vibration analysis of BDFGM nanostructures with arbitrary functions. In addition, in order to obtain small scale effects, the consistent couple-stress theory is also applied. These models can degenerate into the classical models if the material length scale parameter is taken to be zero. In this theory, the couple-tensor is skew-symmetric by adopting the skew-symmetric part of the rotation gradients as the curvature tensor. The material properties except Poisson's ratio are assumed to be graded in both axial and thickness directions, which it can vary according to an arbitrary function. The governing equations are obtained using the concept of Hamilton principle. Generalized differential quadrature method (GDQM) is used to solve the governing equations for various boundary conditions to obtain the natural frequencies of BDFG nano-beam. At the end, some numerical results are presented to study the effects of material length scale parameter, and inhomogeneity constant on natural frequency.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.19 no.6
• /
• pp.503-510
• /
• 2014

This study proposes a bi-directional interleaved current-fed resonant converter (CRC) with reduced size of the output filter for a fuel cell electric vehicle. The proposed CRC achieves zero-current switching turn on and off of switches and diodes and makes ripple current of the output capacitor theoretically zero. As a result, the cost and volume of the output capacitor are significantly reduced. The two-stage power conversion technique is also applied for wide input and output voltage range operations. A 2kW prototype of the proposed converter is built and tested to verify the validity of the proposed operation.