• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.463-466
• /
• 2001

In recent year, Ferroelectric $BLT(Bi_{4-x}La_{x}Ti_{3}O_{12})$ is a promising candidate materials. This study was practiced to make good conditions of BL T targets. In this study, calcination and sintering temperature were kept at $750^{\circ}C$, $1100^{\circ}C$ for 2 hour respectively. the density obtained 7.612, 7.98, $7.877g/cm^{3}$ as $La_{2}O_{3}$ contents were 0.0mol%, 0.25mol%, 0.5mol%. Especially, the lanthanum content of 0.5 mol% measured C-axis (117) preferred orientation more than the others targets in the XRD. In $\varepsilon_{r}-f$ relationship using by HP 4194 A impedance analyzer, the 0.5 mol% observed above 200 relative dielectric constant. but the dissipation factor was higher than others targets at 100Hz~13MHz range. SEM photograph with the content of $La_{2}O_{3}$ was observed like rod and plate types.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.463-466
• /
• 2001

In recent year, Ferroelectric BLT($Bi_{4-x}$La$_{x}$Ti$_3$O$_{12}$) is a promising candidate materials. This study was Practiced to make good conditions of BLT targets. In this study, calcination and sintering temperature were kept at 75$0^{\circ}C$, 110$0^{\circ}C$ for 2 hour respectively. the density obtained 7.612, 7.98, 7.877 g/㎤ as La$_2$O$_3$ contents were 0.0mol%, 0.25mo1%, 0.5mol%. Especially, the lanthanum content of 0.5 mol% measured C-axis (117) preferred orientation more than the others targets in the XRD. In $\varepsilon$$_{r}$-f relationship using by HP 4194 A impedance analyzer, the 0.5 mol% observed above 200 relative dielectric constant. but the dissipation factor was higher than others targets at 100Hz~13MHz range. SEM photograph with the content of La$_2$O$_3$ was observed like rod and plate types.types.s.

• Korean Journal of Plant Resources
• /
• v.21 no.6
• /
• pp.413-419
• /
• 2008

Phenolics level, total flavonoid content, and antioxidant were determined from the methanol extracts of the eight medicinal plants using roots. Total phenolics were found as the highest levels in the methanol extracts of Arctium lappa, and followed by Youngia sonchifolia and Cirsium japonicum. Total amount of the each phenol compounds were detected in C. japonicum extracts ($319.2\;mg\;kg^{-1}$) as the greatest component, and followed by A. lappa ($96.3\;mg\;kg^{-1}$) and Y. sonchifolia ($22.9\;mg\;kg^{-1}$). Total flavonoid content showed the highest amount in methanol extracts from A. lappa (68.1 mg $100\;g^{-1}$) and followed by Y. sonchifolia (11.2 mg $100\;g^{-1}$) Lycoris radiate extracts (87.2%) had the highest nitrite scavenging activity and followed by A. lappa (81.5%) and Y. sonchifolia (77.5%). Methanol extracts of A. lappa at 25 mg $100\;g^{-1}$ exhibited the highest DPPH radical scavenging activity by 90.8%, even though less activity than synthetic antioxidants Vitamin C or butylated hydroxytoluene (BHT). Level of polyphenols was highly correlated with anti oxidative activity ($r^2$ = 0.85). The results suggest that several medicinal plants selected had the potent biological activities, and that their activities were differential depending on plant species.

• Journal of Hydrogen and New Energy
• /
• v.5 no.1
• /
• pp.41-49
• /
• 1994

Ti-Bi alloy was prepared by arc melting of appropriate amounts of titanium and bismuth powder. The photocurrent($I_{ph}$) of Ti-Bi oxide electrode was increased with the increase of Bi content, up to 10wt%. The maximum $I_{ph}$ showed $7.6mA/cm^2$ at V=0.5V vs. SCE. The band gap energy of Ti-Bi oxide electrode was observed to 3.0~2.87eV. Surface barrier($V_s$) of Ti-10Bi oxide electrode showed maximum value(1.08V) but didn't exceed 1.23V, then it was impossible to run $H_2$ generation without any other energy sources other than the light. Ti-Bi oxide electrode was found to be quite stable under alkaline solution and showed no signs of photodecomposition.

• Journal of Magnetics
• /
• v.19 no.3
• /
• pp.205-209
• /
• 2014

$MnBi_{1-x}Ti_x$ (x = 0, 0.4, 0.7, 1) alloys were prepared by arc-melting, followed by heat treatment. X-ray diffraction (XRD) and vibrating sample magnetometer (VSM) were used to measure and investigate the phase structure and magnetic properties. The temperature dependent magnetization curves indicate that the phase transitions between LTP and HTP MnBi occur with heating or cooling in $MnBi_{1-x}Ti_x$ ($x{\leq}0.7$) samples. However, MnTi samples are in $Mn_2Ti$ single-phase, with very low magnetic properties. Furthermore, the coercivity exhibits a positive temperature coefficient. The results show that the optimal content of Ti for the coercivity of $MnBi_{1-x}Ti_x$ alloy is x = 0.4. For MnBi sample, the coercivity reaches a maximum value of 1.13 T at 550 K. However, the remanence and energy product show apparent decrease with the addition of Ti in $MnBi_{1-x}Ti_x$ alloys.

• Journal of the Korean Ceramic Society
• /
• v.55 no.5
• /
• pp.461-472
• /
• 2018

$Gd_2O_3:Eu/Bi$ nanoparticles were synthesized via spray pyrolysis and applied for the preparation of a luminescent pearl pigment as an anti-counterfeiting material. The luminescence properties were optimized by changing the $Eu^{3+}$ and $Bi^{3+}$ concentration. Ethylene glycol was used as an organic additive to prepare the $Gd_2O_3:Eu/Bi$ nanoparticles. The highest emission intensity was achieved when the total dopant content was 10.0 at.% and the mole fraction of Bi was 0.1. The concentration quenching was mainly due to dipole-dipole interactions between the same activators, and the critical distances were 9.0 and $19.6{\AA}$ for $Eu^{3+}$ and $Bi^{3+}$, respectively. The prepared $Gd_2O_3:Eu/Bi$ powder exhibited an average size of approximately 82.5 nm and a narrow size distribution. Finally, the $Gd_2O_3:Eu/Bi$ nanophosphor coated on the surface of the pearl pigment was confirmed to have good red emission under irradiation from a portable ultraviolet light-emitting diode lamp (365 nm).

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.480-481
• /
• 2006

The n-type $(95%Bi_2Te_3-5%Bi_2Se_3)$ compound was newly fabricated by gas atomization and hot extrusion, which is considered to be a mass production technique of this alloy. The effect of powder size on thermoelectric properties of 0.04% $SbI_3$ doped $95%Bi_2Te_3-5%Bi_2Se_3$ alloy were investigated. Seebeck coefficient $({\alpha})$ and Electrical resistivity $(\rho)$ increased with increasing powder size due to the decrease in carrier concentration by oxygen content. With increasing powder size, the compressive strength of $95%Bi_2Te_3-5%Bi_2Se_3$ alloy was increased due to the relative high density. The compound with ${\sim}300\;{\mu}m$ size shows the highest power factor among the four different powder sizes. The rapidly solidified and hot extruded compound using $200[\sim}300{\mu}m$ powder size shows the highest compressive strength.

• Journal of the Korean Vacuum Society
• /
• v.8 no.3A
• /
• pp.224-230
• /
• 1999

$SrBi_{2x}Ta_2O_9$ (SBT) thin films were prepared on platinized silicon substrates by MOD process, and their ferroelectric and leakage current characteristics were investigated. The grain size of the MOD derived SBT films increased with increasing the BI/Ta mole ration. Although the SBT films with x of 0.8~1.2 were composed of the equiaxed grains, the elongated grains were also observed for the SBT films with x of 1.4 and 1.6. The SBT film with x of 1.2 exhibited the optimum ferroelectric properties of 2PR : 9.79 $\muC/\textrm{cm}^2$ and Ec : 24.2kV/cm at applied voltage of 5V. The leakage current density of the SBT films increased with increasing the BI/Ta mole ratio. With post annealing process, 2Pr and $E_c$of the SBT film with x of 1.2 increases 11.3 $\muC/\textrm{cm}^2$ and 39.6kV/cm, respectively. decrement of the leakage current density by post annealing process increased remarkably with increasing the Bi/ta mole ratio, and the SBT film with x=1.6 exhibited the lowest leakage current density after post annealing process.

• Journal of Magnetics
• /
• v.11 no.3
• /
• pp.147-150
• /
• 2006

We have fabricated three-dimensional magnetophotonic crystals based on $\alpha$-$SiO_2$ opal films. Opal thin films grown on glass substrates were filled with bismuth substituted iron garnet (Bi:YIG). Scanning electron microscopy data, optical and magnetic properties of the synthesized samples confirm the presence of the Bi:YIG contentin the opal lattice. It is shown that the samples exhibit the (111) stop band, and transmissivity of the threedimensional magnetophotonic crystals is defined by both the film lattice and the Bi:YIG content.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.2
• /
• pp.115-118
• /
• 1994

Samples of ($Bi_{2-x}Sb_x)PbSr_2Ca_2Cu_3O_y$, compositions with x=0.0, 0.1, and 0.2 were prepared by solid-state reaction. The solubility of Sb into the 2223 phase is lower than 0.05 for the ratio of Sb/Bi. The lack of stability of the Sb-substituted $Bi_2O_2$ double layers is likely to cause the solubility low. There is no great dependence of lattice parameters on the Sb-content, and bonds around the square-pyramidal Cu atom are not affected by the $Sb^{3+}$ ion substituted. The superconducting transition temperature of this system is decreased gradually with increase of Sb, which is tentatively attributable to the perturbation of the Bi 6p-O 2p band and/or to the low volume fraction of the 2223 phase.