• KSBB Journal
• /
• v.26 no.5
• /
• pp.417-421
• /
• 2011

Because beverage waste contains a lot of sugar, it can be used as a valuable resource for energy. But beverage waste is discharged through the water treatment. To prevent the waste of the energy resource, we produced bioethanol by using beverage waste in this study. In order to produce bioethanol, we added distillers stillage and NaOH for fermentation condition (nutrients and pH adjustment). As a results, ethanol concentration was 5.92 vol%. In contrast, ethanol concentration of blank (not added nutrients) was low and fermentation rate was very slow. Because components of the distillers stillage help the yeast growth, fermentation yield and rate was improved. Finally, we operated distillation and dehydration process by using fermented mash and produced fuel bioethanol (more than 99.5 wt%). We think that this results may provide useful information with application of commercial ethanol production using beverage waste.

• Clean Technology
• /
• v.3 no.1
• /
• pp.88-95
• /
• 1997

Energy required, air emission, and solid waste generation are calculated with available foreign data ad domestic status using Life Cycle Analysis in order to compare the environmental impact of beverage containers such as PET bottle, aluminum can, glass bottle, and paper pack. Glass bottles are found to be the worst acceptability when considering only recycling rate of glass cullet, however it becomme the best when the refill(reuse) rate of glass bottles is accounted into. To assess tile current and future environmental impact of beverage containers, energy required, air emission, solid waste generation of current data and recycling goals are compared. As a result of the study, recycling of each containers and the reuse of glass bottles must be increased by governmental enforcement to reduce the environmental impacts by beverage containers. Further study on this subject using detailed LCA(life cycle assessment) data should be implemented for the exact environmental and economic assessment.

• Journal of Applied Tourism Food and Beverage Management and Research
• /
• v.9
• /
• pp.243-271
• /
• 1998

The changes of life-style by improving the standard of living produce the development of food service industry. But, the consequence is that food waste also increase. I think that the problems about the food waste become more critical. There are some reports about counting the amount of remaining foods until now. But, I can not find reports about the calory analysis of the remaining foods. So, I analysis the amounts and calories of the food and remaining food served at the restaurants for the purpose of groping how to reduce the remaining food and conclude as follows. First, the average amount of the food giving to one person is 1007gm(from 300gm to 1367gm), and the average amount of the remaining food is 126gm(from 29gm to 172gm). Second, the average calory of the food giving to one person is 795.5kcal(from 464kcal to 1225kcal), and the average calory of the remaining food is 140.8kcal(from 29kcal to 289kcal). So, we gain 130kcal more than recommending calory to woman. Therefore, we need to studies of developing menu, controlling the amount of supplied food, and improving how to supply. Also we need to study about the using of food bank and publish and use about recycling of food waste.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.7 no.2
• /
• pp.13-19
• /
• 1978

Limwonsibyukgi says that there are fifty-one kinds of beverage easily and cheaply to be made. Through the organoleptic test, I found that eleven kinds of beverages were valuable to develope and specialy yugijang was considered to be superior to coffee. In view of this, the developement of the korean native beverage is advisable in stead of coffee, in that we can recover the soul of our fore fathers and decrease the waste of foreign exchange.

• Korean Journal of Materials Research
• /
• v.29 no.10
• /
• pp.603-608
• /
• 2019

Plastic waste is becoming a problem in various countries because of the difficulty of natural decomposition. One type is PET plastic(Polyethylene Terephthalate), which is often used as a bottle for soft drink packaging, and LDPE(Low Density Polyethylene), which is also widely used as a food or beverage packaging material. The use of these two types of plastic continuously, without good recycling, will have a negative impact on the environment. Building material waste is also becoming a serious environmental problem. This study aims to provide a solution to the problem of the above plastic waste and building material waste by making them into a mixture to be used as bricks. Research is carried out by mixing both materials, namely plastic heated at a temperature of $180-220^{\circ}C$ and building material waste that had been crushed and sized to 30-40 mesh with homogeneous stirring. The ratios of PET and LDPE plastic to building material waste are 9 : 1, 8 : 2, 7 : 3, 6 : 4 and 5 : 5. After heating and printing, density, water absorption and compressive strength tests are carried out. Addition of PET and LDPE plastic can increase compressive strength, and reduce water absorption, porosity and density. A maximum compressive strength of 10.5 MPa is obtained at the ratio of 6 : 4.

• Journal of the Korean Society of Radiology
• /
• v.15 no.6
• /
• pp.855-860
• /
• 2021

Coffee is a popular beverage not only in Korea but also around the world, and its consumption is on the rise. As coffee consumption increases, coffee waste are also increasing, and recycling is attempted in various fields. However, these recycling methods require complex recycling processes and specialized skills. However, in this study coffee waste, agar powder, and powdered glue were mixed in an appropriate ratio and used as a cement building finishing material. This recycling method has a simple manufacturing method and was shown to improve indoor air quality by delaying radon emitted from cement walls for 2.5 hours with one application and 3.9 hours with two applications. In addition, it was shown that after applying the coffee waste mixture, it was applied twice to close the cracks that occurred during the drying process, thereby prevent the coffee waste from falling off the wall for aesthetic perfection.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.30 no.1
• /
• pp.31-42
• /
• 2024

This review paper provides a detailed analysis of PET (polyethylene terephthalate) bottle recycling in Japan. Japan is a global leader in PET bottle recycling due to its advanced regulatory framework and proactive industry initiatives. Japan's success attributes to the widespread adoption of bottle-to-bottle recycling, driven by the beverage industry's commitment to sustainability. By utilizing post-consumer PET bottle recovery and food-grade mechanical recycling technologies, Japan has achieved significant milestones in PET bottle recycling. This paper examines regulatory frameworks, collection systems, reprocessing facilities, and food safety assessments to highlight Japan's innovative approaches to PET bottle recycling and their impact on global sustainability efforts. Drawing parallels with Korea's early stages of PET recycling, it suggests involving major beverage companies and re-evaluating regulations to promote bottle-to-bottle recycling. The focus is on the implications for Korea to promote circular economy principles in plastic recycling.

• Journal of Applied Tourism Food and Beverage Management and Research
• /
• v.13 no.1
• /
• pp.29-41
• /
• 2002

Controlling food materials, is getting more significant in hotel management nowadays as the selling of food beverage continue to rise. F&B managers have been required to have new management of the food materials by a fierce competition, an increase in cost, the shortened span of product life and customer's demand that is becoming more various and sophisticated since Korea was placed under the influence of IMF. I'm going to analyze the factors that cause waste and loss through a series of the process to purchase inspect, store food materials, make a product with that materials and sell the product in order to make more profits by making the circulation of the food materials easier and more efficiently. I studied how 3 chain hotels of A group purchase, store the food materials and control stock. I made up questionnaires about the circulation and control of food materials to 107 cooks in order to know what the cooks who are working at the hotel regard as a real problem and a practical solution. This research indicates that purchasing, producing and selling departments don't establish the mutual connection, a professional purchasing manager is strongly needed and there is difficulty in predicting the proper timing to supply. Also the research shows that A hotel group controls the food materials by analyzing the amount of consumption, stock, setting up the period of validity and uses slowly moving food materials in stock mainly by introducing the menu that aims at four seasons. As a result, the research suggests that we should introduce the concept of food producing factory, as it were, Central Kitchen that is based on the network among various kitchens to improve the flow of the food materials.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.5
• /
• pp.1359-1367
• /
• 2008

We analyzed the physical and chemical properties such as proximate analysis, ultimate analysis, heating values, thermogravimetric analysis, and combustion test for the organic sludges generated from paper and beverage manufacturing industries in the industrial complex. The average water and combustible content of the organic sludges from paper and beverage manufacturing industries were 66.07% and 14.67%, 54.98% and 26.77%, respectively. From the ultimate analysis of the organic sludges, C, H, O, N, and S compositions were 21.75%, 3.42%, 32.70%, 0.63%, and 0.30%, respectively. For beverage manufacturing industries, C, H, O, N, and S compositions were 39.88%, 4.28%, 23.20%. 2.65%, and 0.35%, respectively. According to the results of investigating the lower heating values by Dulong's equation, 1 sludge(T company) was on the range of over 2,000 kcal/kg. This sludge could be directly applied to industries which try to use the energy by direct incineration. From the TGA test, the minimum combustion temperature of A company's sludge was about $700^{\circ}C$ for direct use for energy and that of 3 sludges(C, I, and T company) were at least over $800^{\circ}C$.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.1
• /
• pp.21-25
• /
• 2014

A drying machine for discarded Citrus scrap was developed in this study. The Citrus produced in Jeju Province was treated as wastes (a) after making a beverage, such as drinking juice, and (b) if the size of the product did not fit with its agricultural product criteria. Various types of drying machine were developed in this study, and different kinds of technologies were combined improve the performance. To enhance the performance, the system was maintained in a vacuum state, and a high frequency micro wave was activated to the waste Citrus scrap, to heat up the moisture inside the Citrus kernels. The frequency of the micro-wave was 2.6 GHz, which is the resonant frequency of the molecules. Experiments were conducted with a vacuum of 50, 100, 150, 300, 500, and 700 mbar. The waste Citrus scrap has two types of status : (a) original scrap, and (b) mixed with blender. As results, specimen (a) shows a 0.13 g/sec evaporation rate, while specimen (b) shows a 0.19 g/sec rate, at 50 mbar of environment vacuum condition. For the drying efficiency, specimens (a) and (b) show 0.15 g/W and 0.24 g/W, respectively.