• 마이크로전자및패키징학회지
• /
• 제23권4호
• /
• pp.57-61
• /
• 2016

대용량 전력저장용 황화나트륨 기반의 전지를 개발함에 있어서 베타 알루미나 고체 전해질 튜브와 알파 알루미나 셀 캡 간의 물리적 접합을 위해서는 세라믹-세라믹 접합용 씰링 글라스 후막 페이스트가 필요하다. 본고에서는 글라스 프릿 분말의 입도, 열처리 조건이 씰링 글라스의 열처리 후 미세구조 특히 기공율과 그 분포에 미치는 영향을 연구하였다. 씰링 글라스 분말의 입자가 클수록 열처리 후의 글라스의 미세 조직상에서의 기공율 및 기공의 수가 감소하였으며, 열처리 온도가 증가 할수록 기공의 수가 감소하는 반면 기공의 크기는 증가함을 확인하였다. 이로써 글라스 씰란트의 제조에 있어서, 글라스 페이스트용 글라스 프릿 분말의 입자 크기와 씰링 열처리 온도의 적절한 선정에 의해 글라스 씰링부의 미세구조에서 기공율과 기공의 분포 및 기공의 수를 제어할 수 있음을 보여주었다.

• Applied Biological Chemistry
• /
• 제39권4호
• /
• pp.260-264
• /
• 1996

Cymbidium속 난의 형질전환계를 확립하기 위해서, microprojectile bombardment 방법을 이용하여 춘란(Cymbidium virescence)의 rhizome 조직세포에 외래 유전자를 도입하는 조건을 검토하였다. 각 parameter별 적정조건으로서 텅스텐 입자의 크기는 $1.11\;{\mu}m$, He 가스 압력은 $77.33kg/cm^2$, gap distance는 6.35mm, target distance는 7.0cm 이었다. DNA피복입자를 투사한 $400{\mu}m$ 두께의 rhizome 절편을 2개월간 배양한 뒤 GUS 활성을 조사한 결과 이 유전자가 발현되는 세포들이 관찰되었다. Kanamycin (100 mg/L)을 첨가한 배지에서 6개월 동안 선택배양을 통해 얻은 rhizome의 DNA를 PCR로 분석한 결과 nptII 유전자의 삽입을 확인할 수 있었다.

• 대한토목학회논문집
• /
• 제12권3호
• /
• pp.221-229
• /
• 1992

퇴적물(堆積物)의 형태(形態), 함수비(含水比) 및 저면전단응력(底面剪斷應力)(${\tau}_b$)이 미세퇴적물(微細堆積物)의 부상특성(浮上特性)에 미치는 영향을 연구하기 위해 순환식 개수로에서 부상실험(浮上實驗)을 하였다. 시료는 한국(韓國)의 서해안(西海岸)에 위치한 영광해역과 남동해안(南東海岸)에 위치한 영도해역에서 채취한 것을 사용하였다. 퇴적물(堆積物)의 종류 및 함수비의 크기에 따른 부상한계저면전단응력(浮上限界底面剪斷應力)(${\tau}_c$)이 유추되었다. 동일한 시료에 대해서 함수비(含水比)가 클 수록 상한계저면전단응력(浮上限界底面剪斷應力)은 감소하였으나, 부상량(浮上量)은 증가하였다. 퇴적물(堆積物)의 부상(浮上)은 퇴적물(堆積物)의 함수량(含水量)에도 크게 좌우되지만, 입자간(粒子間)의 결합력(結合力)(점참력(粘着力))을 특징짓는 퇴적물(堆積物)의 형태(形態)에도 강하게 지배되었다. 한 방향 흐름장에서 부상한계저면전단응력(浮上限界底面剪斷應力)은 파-흐름 공존장에서의 부상한계저면전단응력(浮上限界底面剪斷應力)보다 약 4배 이상 크게 나타났다. 저면전단응력(底面剪斷應力)이 작을 경우에는 실험초기(實驗初期)에 급부상(急浮上)한 후 시간이 경과할 수록 저면의 경화로 인해 부상량(浮上量) 어느 일정치에 가까와지고 있으나, 저면전단응력(底面剪斷應力)이 클 수록 시간의 경과에 따라 저변의 연약화로 인해 부상량(浮上量)도 계속적으로 증가하였다. 각(各) 실험(實驗)에 대한 초기(初期) 부하율(浮上率) $E={\alpha}_3({\tau}_b/{\tau}_c-1)^{\beta}$ (${\alpha}_3$, ${\beta}$ = 경험적 상수)을 평가하였으며, 동일한 시료에 대해서는 함수비(含水比)가 클 수록 ${\alpha}_3$와 ${\beta}$ 값이 증가하였다.

• 한국결정성장학회지
• /
• 제7권3호
• /
• pp.428-436
• /
• 1997

0.8$\mu$의 평균입자크기와 63$m^2/g$의 비표면적을 갖는 소질성이 뛰어난 hexacelsian분말이 so;ution-polymerization 방법에 의해 제조되어졌다. polymerization 경정을 통한 분말합성을 위하여 PVA 용액이 사용되었다. 소결후 치밀화된 hexacelsian은 $\alpha$,$\beta$,$\gamma$ 간의 상전이 거동을 보였고, 상대밀도 98.5% 의 치밀화ㄱ된 celsian 소결체가 $1600^{\circ}C$에서 72시간의 서냉공정을 거쳐hexacelsian의 상전이에 의하여 얻어졌다.

• 미생물학회지
• /
• 제21권2호
• /
• pp.61-70
• /
• 1983

Synchronized cat kidney cells chronically infected with feline leukemia virus (FeLV) were used to study virus production, the synthesis of group specific antigen (gag) and envelope (env) proteins, the expression of env protein on the cell surface during the cell cycle, and the stability of viral RNA. As detecting method, we developed the radioimmunoassay (RIA) system using beta-emission of $^{131}I$ and demonstrated the validity of this system by comparison with routine RIA system using gamma-emission of $^{125}I$. The produced virus was analysed by developed RIA interval was determined by measuring reverse transcriptase activity. The results show that infected cells produce the complete virus particle containing products of gag, env and pol genes of FeLV, and maximum virus production occurs during mitosis of synchronized cells. Labeling of the cell surface of synchronized cells with $^{131}I$ shows that the amount of $gp70^{env}$ on the cell surface parallels cellular gorwth. Therefore, the cell cycle-dependent release of virus is not petition RIA of synchronized cells with $^{131}I$ labeled viral proteins synthesis during the cell cycle. The rate of synthesis of gag protein shows three peaks, corresponding to the $G_1,\;late\;S\;and\;late\;G_2$ phases of cell cycle. But the rate of synthesis of env protein dose not change, suggesting that in these cells the synthesis of these two gene products in controlled seperately. In Actionomycin D treated cells, the synthesis of viral proteins decreased sharply from 8 hours after treatment, and the late S and $G_2$ peaks of gag protein synthesis were disappeared. This shows the stability of viral RNA for about 6 hours in the absence of continuing viral RNA synthesis.

• 한국분말재료학회지
• /
• 제9권6호
• /
• pp.422-432
• /
• 2002

Mechanically driven decomposition of intermetallics during mechanical milling(MM 1 was investigated. This process for Fe-Ce and Fe-Sn system was studied using conventional XRD, DSC, magnetization and alternative current susceptibility measurements. Mechanical alloying and milling form products of the following composition (in sequence of increasing Gecontent): $\alpha$(${\alpha}_1$) bcc solid solution, $\alpha$+$\beta$-phase ($Fe_{2-x}Ge$), $\beta$-phase, $\beta$+FeGe(B20), FeGE(B20), FeGe(B20)+$FeGe_2$,$FeGe_2$,$FeGe_2$+Ge, Ge. Incongruently melting intermetallics $Fe_6Ge_5$ and $Fe_2Ge_3$ decompose under milling. $Fe_6Ge_5$ produces mixture of $\hat{a}$-phase and FeGe(B20), $Fe_2Ge_3$ produces mixture of FeGe(B20) and $FeGe_2$ phases. These facts are in good agreement with the model that implies local melting as a mechanism of new phase for-mation during medchanical alloying. Stability of FeGe(B20) phase, which is also incongruently melting compound, is explained as a result of highest density of this phase in Fe-Ge system. Under mechanical milling (MM) in planetary ball mill, FeSn intermetallic decomposes with formation $Fe_5Sn_3$ and $FeSn_2$ phases, which have the biggest density among the phases of Fe-Sn system. If decomposition degree of FeSn is relatively small(<60%), milled powder shows superparamagnetic behavior at room temperature. For this case, magnetization curves can be fitted by superposition of two Langevin functions. particle sizes for ferromagnetic $Fe_5Sn_3$ phase determined from fitting parameters are in good agreement with crystalline sizes determined from XRD data and remiain approximately chageless during MM. The decomposition of FeSn is attributed to the effects of local temperature and local pressure produced by ball collisions.

• 한국의류산업학회지
• /
• 제6권4호
• /
• pp.503-510
• /
• 2004

The study is one of fundamental researches for the development of future smart clothing and textile products with blocking properties from electromagnetic waves by analyzing human physical symptoms in using electromagnetic products in such an environments. Among various textiles in the experiment, nano silver has shown the best blocking performance from electromagnetic waves, which decreases depending on the distance. The power spectrum distribution and the incidence of electroencephalogram between blocking materials and aural stimuli has shown that, ${\beta}$, wave appeared to be active in all channels except for $T_4$, whereas all waves appeared with processed materials and especially with nano silver silk(NSS), ${\alpha}$, ${\beta}$, ${\theta}$, ${\gamma}$ waves appeared active in all regions. As for the brain mapping of ${\alpha}$ wave according to time, there found a strong activity in $P_3$, $P_4$ of the parietal lobe, with all materials on all time regions. With silk nylon metal(SNM) and NSS, it appeared strong in $F_3$, $F_4$ as well. As for ${\beta}$, wave, the activity appeared strong in frontal lobe before 7min. 30sec, where it tends to diminish abruptly in 7min. 30sec. to 13min. 30sec. region. After 13min., it regained gradually. With NSS, it appeared strong in all areas except for the farthest $T_4$. The appearance of ${\nu}$ wave can be deduced as it can affect human body with its toxic property while the silver particles become nano-sized. Therefore, the study conducted with human participants requires a proper particle size of it which would not penetrate cellular tissues and a proper binder and binding treatment for it, to prevent the physical fatigues and the potential diseases. However, it is highly required for back-up researches to verify various aspects in applying nano silver to textile products.

• 한국의류산업학회지
• /
• 제6권6호
• /
• pp.810-814
• /
• 2004

This study is one of the fundamental researches for the development of future smart clothing and textile products using silver(Ag) nano powder. Our study was focused on the blocking or insulating effects of nano-processed textiles from electromagnetic waves. Also, for the surveying of the actual effect to human body, we measure the variation of electroencephalogram which is an indication of human physical symptoms. Among various textiles in this experiment, nano silver processed case has shown the best blocking performance from the electromagnetic waves, which decreases depending on the distance. As a reference model of working environment, we setup the visual stimuli object on the computer that is a source of electromagnetic wave. The power spectrum distribution and the incidence of electroencephalogram was measured. The analysed data has shown that, with nano-processed textiles, ${\beta}$ wave does not appear very often where ${\beta}$ wave appears only to illustrate the stable states of human's body. However, as for the materials without nano processing, the ratio of ${\gamma}$ waves in the total level of electroencephalogram becomes higher in spite of short exposure to visual stimuli in work environment, which shows that the worker becomes stressed. The ${\beta}$ wave electroencephalogram of all materials is drawn in calcarine fissure of occipital lobe to show the convergent distribution, and stronger with block-processed Nano Silver Silk(NSS). The study based on the potential risks of human diseases such as physical fatigue by electromagnetic waves, and has shown that the application of Nano Silver textile for human uses require a proper particle size of it which would not penetrate cellular tissues, and a proper binder and binding treatment for it. However, it is highly required for back-up researches to verify various aspects in applying nano silver to textile products.

• Nuclear Engineering and Technology
• /
• 제49권8호
• /
• pp.1610-1616
• /
• 2017

To validate the new Evaluated Nuclear Data File $(ENDF)/B-VIII.0{\beta}4$ library, 31 different critical cores were selected and used for a benchmark test of the important parameter keff. The four utilized libraries are processed using Nuclear Data Processing Code (NJOY2016). The results obtained with the $ENDF/B-VIII.0{\beta}4$ library were compared against those calculated with ENDF/B-VI.8, ENDF/B-VII.0, and ENDF/B-VII.1 libraries using the Monte Carlo N-Particle (MCNP(X)) code. All the MCNP(X) calculations of keff values with these four libraries were compared with the experimentally measured results, which are available in the International Critically Safety Benchmark Evaluation Project. The obtained results are discussed and analyzed in this paper.

• 한국식품저장유통학회지
• /
• 제9권2호
• /
• pp.189-193
• /
• 2002

천연식초를 이용하여 분말식초의 제조방법을 개발하고자 부형제의 비율을 달리하여 제조한 분말식초의 품질특성을 평가하여 분말식초의 제조 가능성을 검토하였다. 혼합 피복 물질로 제조된 분말식초의 품질특성을 비교한 결과 $\beta$-cyclodextrin과 gum arabic이 2.5:7.5의 비율로 제조한 분말식초가 비교적 낮은 수분함량을 나타내었고 산도는 높은 수치를 나타내 식초를 포집하는 능력이 가장 좋은 것으로 나타났다. 또한 이 비율로 제조한 분말식초의 흡습성 또한 비교적 낮은 값을 나타내었으며 열안정성은 모든 시료가 높은 수치를 나타내 열에는 모두 안정함을 알 수 있었다. 주사 현미경으로 관찰한 분체의 형태는 모두 구형을 형성하여 분말식초에서 캡슐이 형성되었음을 알 수 있었다. 관능검사 결과도 신맛의 증가로 높은 점수를 받았다. 이상의 결과로 분말식초의 제조시 피복물질의 혼합비율별은 $\beta$-cyclodextrin 과 gum arabic을 2.5:7.5의 비율로 제조하는 것이 가장 우수한 것으로 나타났다.