• Journal of the Korean Data and Information Science Society
• /
• v.22 no.2
• /
• pp.189-196
• /
• 2011

In this study, we perform a simulation study to compare frequently used standardization methods for interview scores based on trimmed mean, rank mean, and z-score mean. In this simulation study we assume that interviewer's score is influenced by a weighted average of true interviewee's true score and independent noise whose weight is determined by the professionality of the interviewer. In other words, as interviewer's professionality increases, the observed score becomes closer to the true score and if interviewer's professionality decreases, the observed score becomes closer to the noise instead of the true score. By adding interviewer's tendency bias to the weighed average, final interviewee's score is assumed to be observed. In this simulation, the interviewers's cores for each method are computed and then the method is considered best whose rank correlation between the method's scores and the true scores is highest. Simulation results show that when the true score is from normal distributions, z-score mean is best in general and when the true score is from Laplace distributions, z-score mean is better than rank mean in full interview system, where all interviewers meet all interviewees, and rank mean is better than z-score mean in half split interview system, where the interviewers meet only half of the interviewees. Trimmed mean is worst in general.

• Journal of the Korea Concrete Institute
• /
• v.14 no.5
• /
• pp.774-781
• /
• 2002

Shear behaviors of eight dapped ends of four full-scale domestic single-tee slabs were evaluated. The dapped ends with 10cm topping concrete were designed based on live load requirements for the domestic parking lot of m 500kgf/㎡ and for the large market of 1,200 kgf/㎡. All specimens were designed by the ACI 318-99 design. The variations of the experiment were the shape of hanger reinforcements as followings: 1) general PCI design method(currently used in domestic), 2) 90 degree bent-up, 3) 60 degree bent-up. All experiments were conducted with 1.2 m shear span. The results obtained in this study were 1) all specimens fully complied with the shear strength requirements as specified by ACI 318-99 except for one strand bond slip specimen, 2)a specimen with the 60 degree bent up hanger reinforcing detail showed the best shear behaviors under full service and ultimate load, and 3)a specimen with the 90 degree bent up hanger reinforcing detail resulted in the worst shear behaviors.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.28 no.3
• /
• pp.81-101
• /
• 2003

The financial statements purpose to provide useful information to decision-making process of business managers. The value-relevant information, however, embedded in the financial statement has been often overlooked in Korea. In fact, the financial statements in Korea have been utilized for nothing but account reports to Security Supervision Boards (SSB). The objective of this study is to develop earnings forecasting models through financial statement analysis using artificial intelligence (AI). AI methods are employed in forecasting earnings: artificial neural networks (ANN) for manufacturing industry and case~based reasoning (CBR) for banking industry. The experimental results using such AI methods are as follows. Using ANN for manufacturing industry records 63.2% of hit ratio for out-of-sample, which outperforms the logistic regression by around 4%. The experiment through CBR for banking industry shows 65.0% of hit ratio that beats the statistical method by 13.2% in holdout sample. Finally, the prediction results for manufacturing industry are validated through monitoring the shift in cumulative returns of portfolios based on the earning prediction. The portfolio with the firms whose earnings are predicted to increase is designated as best portfolio and the portfolio with the earnings-decreasing firms as worst portfolio. The difference between two portfolios is about 3% of cumulative abnormal return on average. Consequently, this result showed that the financial statements in Korea contain the value-relevant information that is not reflected in stock prices.

• Journal of Korean Society on Water Environment
• /
• v.25 no.5
• /
• pp.735-741
• /
• 2009

In order to support the basic information for planning and performing the environment management such as Total Maximum Daily Loads (TMDLs), it is highly recommended to understand the spatial distribution of water quality and runoff data in the unit watersheds. Therefore, in the present study, we applied Self-Organizing Map (SOM) to detect the characteristics of spatial distribution of Biological Oxygen Demand (BOD) concentration and runoff data which have been measured in the Yeongsan, Seomjin, and Tamjin River basins. For the purpose, the input dataset for SOM was constructed with the mean, standard deviation, skewness, and kurtosis values of the respective data measured from the stations of 22-subbasins in the rivers. The results showed that the $4{\times}4$ array structure of SOM was selected by the trial and error method and the best performance was revealed when it classified the stations into three clusters according to the basic statistics. The cluster-1 and 2 were classified primarily by the skewness and kurtosis of runoff data and the cluster-3 including the basic statistics of YB_B, YB_C, and YB_D stations was clearly decomposed by the mean value of BOD concentration showing the worst condition of water quality among the three clusters. Consequently, the methodology based on the SOM proposed in the present study can be considered that it is highly applicable to detect the spatial distribution of BOD concentration and runoff data and it can be used effectively for the further utilization using different water quality items as a data analysis tool.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.1 no.2
• /
• pp.144-153
• /
• 1991

This study was conducted to evaluate worker exposure to airborne asbestos fibers by industry, and to evaluate polarized-light microscopy for determining airborne asbestos fibers. A total of 11 plants including asbestos textile, brake-lining manufacturing, slate manufacturing, and automobile maintenance shops were investigated. Rsults of the study are summarized as follows. 1. Worker exposure levels to airborne asbestos fibers were the highest in asbestos textile industry, followed by brake-lining manufacturing, slate manufacturing, and automobile maintenance shops, in order. In asbestos textile industry, large variation of asbestos levels was found by plants. The worst plant indicated airborne fiber concentrations in excess of 10 fibers/cc, however, the best plant showed concentrations within 0.50 fibers/cc. 2. Characterization of airborne fibers by industry indicated that fibers from asbestos textile industry were the longest with the largest aspect ratio. Fibers from automobile maintenance shops were the shortest with the smallest aspect ratio. Based on characteristics of fibers and the highest levels of concentrations, it is concluded that workers in the asbestos textile industry are exposed to the highest risk of producing asbestosis, lung cancer, and mesothelioma. 3. Result s obtained using polarized-light microscopy were $43.7{\pm}12.3%$ of the results obtained using phase contrast microscopy. This may be resulted from the worse resolution of polarized-light microscopy than that of phase contrast microscopy. Based on the results, it is recommended that polarized-light microscopy be used for mainly bulk sample analyses and further study be performed to improve the method for determining airborne samples. However, polarized-light microscopy can be used for determining thick fibers.

• The Journal of Advanced Prosthodontics
• /
• v.11 no.6
• /
• pp.331-340
• /
• 2019

PURPOSE. The purpose of this study is to assess the accuracy of three intraoral scanners along the complete dental arch and evaluate the feasibility of the assessment methodology for further in vivo analysis. MATERIALS AND METHODS. A specific measurement pattern was fabricated and measured using a coordinate measuring machine for the assessment of control distances and angles. Afterwards, the pattern was placed and fixed in replica of an upper jaw for their subsequent scans (10 times) using 3 intraoral scanners, namely iTero Element1, Trios 3, and True Definition. 4 reference distances and 5 angles were measured and compared with the controls. Trueness and precision were assessed for each IOS: trueness, as the deviation of the measures from the control ones, while precision, as the dispersion of measurements in each reference parameter. These measurements were carried out using software for analyzing 3-dimensional data. Data analysis software was used for statistical and measurements analysis (α=.05). RESULTS. Significant differences (P<.05) were found depending on the intraoral scanner used. Best trueness values were achieved with iTero Element1 (mean from 10 ± 7 ㎛ to 91 ± 63 ㎛) while the worst values were obtained with Trios3 (mean from 42 ± 23 ㎛ to 174 ± 77 ㎛). Trueness analysis in angle measurements, as well as precision analysis, did not show conclusive results. CONCLUSION. iTero Element1 was more accurate than the current versions of Trios3 and True Definition. Importantly, the proposed methodology is considered reliable for analyzing accuracy in any dental arch length and valid for assessing both trueness and precision in an in vivo study.

• Journal of Distribution Science
• /
• v.19 no.12
• /
• pp.33-43
• /
• 2021

Purpose: This paper aims to determine features of the relationship between human development, tourism and national brand. Research design, data and methodology: ranking indicators, cluster analysis, K means method, correlation analysis. Results: The analysis covers data for 95 countries for 2019. The number of countries is justified by the availability of comparable data for calculations. A direct relationship between the indicators for the entire sample has been revealed in the result of the correlation analysis. However, this relationship has not been confirmed for the groups of countries that were formed through the cluster analysis. Spearman Rank Order and Kendall Tau Correlations have been calculated for the five obtained clusters. In two of the five clusters, the relationship between the indicators has not been found. A strong negative link between all the indicators has been detected in the cluster with average index values. A strong positive link between TTCI and BSI has been revealed in the group of countries with the best index values. A strong positive link between TTCI and HDI has been found in the group of countries with the worst index values. Conclusions: The analysis demonstrates that there is a relationship between BSI, TTCI and HDI, and while this link is observed for the sample as a whole, it is not homogeneous for groups of countries.

• Transactions of the Korean hydrogen and new energy society
• /
• v.34 no.2
• /
• pp.178-186
• /
• 2023

Three activation methods (constant voltage, current cycling, and hydrogen pumping) were applied to investigate the effects on the performance of the membrane electrode assembly (MEA) loaded with PtCo/C catalyst. The current cycling protocol took the shortest time to activate the MEA, while the performance after activation was the worst among the all activation methods. The constant voltage method took a moderate activation time and exhibited the best performance after activation. The hydrogen pumping protocol took the longest time to activate the MEA with moderate performance after activation. According to the distribution of relaxation time analysis, the improved performance after the activation mainly comes from the decrease of charge transfer resistance rather than the ionic resistance in the cathode catalyst layer, which suggests that the existence of water on the electrode is the key factor for activation.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.4
• /
• pp.221-237
• /
• 2011

This study aims to investigate the environmental equity of the accessibility to urban neighborhood parks in the city of Daegu. The spatial distribution of urban neighborhood parks was explored by spatial statistics and the spatial accessibility to them was then evaluated by both minimum distance and coverage approaches. Descriptive and inferential statistics such as proximity ratio, Mann Whitney U test, and logistic regression were used for comparing the socioeconomic characteristics over different accessibilities to the neighborhood parks and then testing the distributional inequity hypothesis. The results from the minimum distance method indicated that Dalseo-gu had the best accessibility to the neighborhood parks while Dong-gu had the worst accessibility. It was apparent with the coverage method that Dalseo-gu had the best accessibility whereas Dong-gu and Nam-gu had the worst accessibility to the neighborhood parks at 500m and 1,000m buffer distances. There existed the spatial pattern of environmental inequity in old towns with respect to population density and the percentage of people under the age of 18. The spatial pattern of environmental inequity in new towns was explored on the basis of the percentage of people over the age of 65, the percentage of people below the poverty level, and the percentage of free of charge rental housing. These results were closely related to the development process of urban parks in Daegu stimulated by the quantitative urban park policy, urban development process, and residential location pattern such as permanent rental housing and free of charge rental housing. This study further extends the existing research topics of environmental justice related to the distributional inequity of environmental disamenities and hazards by focusing on environmental amenities such as urban neighborhood parks. The results from this study can be used in making the decisions for urban park management and setting up urban park policy with considering the social geography of Daegu.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.7
• /
• pp.729-736
• /
• 2011

The technique for order preference by similarity to ideal solution (TOPSIS) is regarded as a classical method of multiple attribute decision making (MADM), often used to solve various decision-making or selection problems. It is based on the concept that the chosen alternative should have the shortest distance from the positive ideal solution and the farthest distance from the negative ideal solution. The TOPSIS can be applied to a design process for carrying out multi-objective shape optimization wherein the best and worst alternatives are to be decided. In this paper, multi-objective shape optimization using the TOPSIS and Rational Bezier curve was applied to the funnel of a cathode-ray tube (CRT). In order to minimize the weight and first principal stress, a new multi-objective shape optimization methodology is proposed, wherein the relative-closeness coefficients of the TOPSIS are defined as the performance indices of a multi-objective function and evaluated by response surface models. This methodology enables the designer to decide on the best solution from a number of design specification groups by examining the various conflicts between the weight and the first principal stress.