• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권3호
• /
• pp.282-291
• /
• 2017

The main aim of this study is to investigate the effect of berm breakwater on wave run-up. A total of 200 numerical analysis tests have been carried out in this paper to investigate the effect of berm width, wave height, and wave period on the wave run-up, using an integrating technique of Computer-Aided Design (CAD) and Computational Fluid Dynamics (CFD). Direct application of Navier Stokes equations within the berm width has been used to provide a more reliable approach for studying the wave run-up over berm breakwaters. A well tested Reynolds-averaged Navier-Stokes (RANS) code with the Volume of Fluid (VOF) scheme was adopted for numerical computations. The computational results were compared with theoretical data to validate the model outputs. Numerical results showed that the simulation method can provide accurate estimations for wave run-up over berm breakwaters. It was found that the wave run-up may be decreased by increasing the berm width up to about 36 percent. Furthermore, the wave run-up may increase by increasing the wave height and wave period up to about 53 and 36 percent, respectively. These results may convince the engineers to use this model for design of berm breakwater in actual scale by calculating the Reynolds numbers.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.1078-1082
• /
• 2005

In this study, the run-up height and reflection property on slopes of S-berm and smooth slopes breakwaters are investigated by laboratory experiment. The run-up height analyzed the effect of reflection coefficient, surf similarity parameter. Measured reflection coefficients of smooth slope breakwaters are compared with those of S-berm breakwater with variable widths. In general, measured coefficients of S-berm breakwaters are smaller than those of smooth slope breakwaters.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2006년도 학술발표회 논문집
• /
• pp.1919-1924
• /
• 2006

In this study, the run-up of water waves on slopes of s-berm breakwaters was investigated by performing a series of hydraulic experiments. The run-up height was analyzed in detail by using the effects of wave steepness and surf similarity parameter. In general, the run-up heights were decreased as the height and the width of berm were increased. However, the variation of run-up height was small for change of wave steepness and surf similarity parameter.

• 한국해안해양공학회지
• /
• 제13권3호
• /
• pp.202-208
• /
• 2001

현재 실무에서 많이 적용되고 있는 Saville의 가상 구배법에 기초하여 복합사면에서의 도파고를 간단히 산정하기 위한 양해적 근사식을 개발하였다. 수심대 파고비, 사면경사, 파형경사 등과 도파고비와의 관계를 도출하였다. 또한 도파고 산정에 있어 정확도를 검증하기 위하여 양해적 근사식의 산정결과를 Saville의 관측결과와 네덜란드 Delft 공식의 산정결과와 비교하였다.

• 한국해안해양공학회지
• /
• 제18권2호
• /
• pp.147-153
• /
• 2006

본 연구에서는 s-소단 경사식 방파제에서의 처오름 특성을 검토하기 위하여 수리모형실험을 수행하였다. 소단의 높이와 폭을 변화시켜가며 파형경사 및 쇄파계수의 변화에 따른 처오름높이 계측결과를 분석하였다. 그 결과 소단의 폭과 높이가 증가될수록 처오름높이는 감소함을 알 수 있었으며, 파형경사와 쇄파계수의 변화에 따른 처오름높이의 변화는 크지 않음을 알 수 있었다.

• 한국해양공학회지
• /
• 제31권6호
• /
• pp.397-404
• /
• 2017

In this study, an anchor dragging simulation was performed using the CEL method to design a rock-berm, which is a protection method for submarine cables. In order to simulate an anchor drag, preliminary simulations were first performed to determine the initial anchor penetration depth, anchor drag velocity, drag angle, and distance between the anchor and rock-berm. Based on the preceding simulation results, a safe rock-berm design for protecting the submarine cables was simulated to calculate the anchor penetration depth by the anchor dragging. As a result, the penetration depth of the anchor was found to be shallower in a hard seabed, and the penetration depth was deeper in a soft seabed, the height of the rock-berm was determined according to the physical properties of the seabed.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 춘계학술대회 논문집
• /
• pp.121-127
• /
• 2003

Wave overtopping is one of the most important hydraulic responses of breakwater because it significantly affects its functional efficiency, the safety of transit and mooring on the rear side, wave transmission in the sheltered area, rear side armor stones and to some extent, the structural safety itself. In this study, hydraulic model tests has been carried out to investigate the influence of berm's size on overtopping rate by maximum overtopping rate and mean overtopping rate. The hydrodynamic characteristics of berm breakwater by the overtopping rate can be summarized as follows: 1. It is better to use maximum overtopping rate than to use mean overtopping rate for design of coastal structures in the point of view of stability. 2. When construct berm to decrease energy of waves that it was needed to make breaking conditions of wave on the berm. 3. Under the relative length of berm was over 0.13 overtopping rate was significantly decreased. 4. Overtopping rate affected significantly by the relative length of yhe berm than height of the berm.

• Smart Structures and Systems
• /
• 제15권2호
• /
• pp.299-314
• /
• 2015

Submersed rock-berm structures are frequently used for protection of underwater lifelines such as pipelines and power cables. During the service life, the rock-berm structure can experience several accidental loads such as anchor collision. The consequences can be severe with a certain level of frequency; hence, the structural responses should be carefully understood for implementing a proper structural health monitoring method. However, no study has been made to quantify the structural responses because it is hard to deal with the individual behavior of each rock. Therefore, this study presents a collision analysis of the submersed rock-berm structure using a finite element software package by facilitating the smoothed-particle hydrodynamics (SPH) method. The analysis results were compared with those obtained from the Lagrange method. Moreover, two types of anchors (stock anchor and stockless anchor), three collision points and two different drop velocities (terminal velocity of each anchor and 5 m/s) were selected to investigate the changes in the responses. Finally, the effect of these parameters (analysis method, anchor type, collision point and drop velocity) on the analysis results was studied. Accordingly, the effectiveness of the SPH method is verified, a safe rock-berm height (over 1 m) is proposed, and a gauge point (0.5 m above the seabed) is suggested for a structural health monitoring implementation.

• 한국해안해양공학회:학술대회논문집
• /
• 한국해안해양공학회 2001년도 한국해안해양공학발표논문집 Proceedings of Coastal and Ocean Engineering in Korea
• /
• pp.37-41
• /
• 2001

• 한국전통조경학회지
• /
• 제35권4호
• /
• pp.126-133
• /
• 2017

본 연구는 조경기술기반 LID 시스템 적용에 따른 선릉 정릉 권역의 우수유출변화를 수문학적 관점에서 분석하였으며, 연구결과를 다음과 같이 정리할 수 있다. 첫째, 광화문 침수가 발생한 2011년 7월 27일 기준 최대순간강우량은 27일 10시에 기록된 183mm/hr로 시간당 최대강우량 57.5mm/hr에 비해 3배 이상의 강우강도가 10분간 집중된 것으로 확인되었다. 둘째, 토심기준 시나리오에서 담심 1,500mm의 경우 첨두유출량 제어가 가능하여 해당 조경기술기반 LID 시스템 적용 시 선릉 정릉 권역의 수해취약성을 개선할 수 있을 것으로 판단된다. 셋째, 담심 기준 시나리오에서 모든 토심 모형에서 첨두유출량 제어가 이루어지지 않았으나, 최초 우수유출을 토심 기준 시나리오에 비해 4시간 10분의 추가적인 지연효과를 기록하였다. 초기 우수유출저감에는 토심, 첨두유출량에는 담심이 상대적으로 중요한 지표로 해석되었다. 이를 통해 문화재 보호권역 내 경관친화적인 생태적 요소를 시스템화하여 적용할 경우 예상되는 수해방재효과를 이론적으로 확인할 수 있었다.