• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.1A
• /
• pp.8-18
• /
• 2011

Visible light communication (VLC) using optical sources which can be simultaneously utilized for illumination and communication is currently an attractive option for wireless personal area network. Improving the data rate in optical wireless communication system is challenging due to the limited bandwidth of the optical sources. In this paper, we design the singular value decomposition (SVD)-based multiplexing multi-input multi-output (MIMO) system to support two data streams in optical wireless channels. In order to improve the spectral efficiency, the rate adaptation using multi-level pulse amplitude modulation (PAM) is applied according to the channel condition and we propose the method to allocate the optical power, the offset and the size of modulation scheme theoretically under the constraints of the nonnegativity of the modulated signals, the aggregate optical power and the bit error rate (BER) requirement. The simulation results show that the proposed allocation method gives the better performance than the method to allocate the optical power equally for each data stream.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.8
• /
• pp.24-31
• /
• 2010

A receiver architecture with low complexity for chirp spread spectrum (CSS) of IEEE 802.15.4a is proposed. To demodulate the received signal at the highest signal to noise power ratio, matched filter is generally adopted for the receiver of wireless communication systems. It is, however, not resonable to adjust the matched filter to the receiver of CSS whose objectives are low complexity, low cost and low power consumption since complexity of the matched filter is high. In this paper, we propose a new receiver architecture using differential multiplication and accumulator not matched filter for demodulation. Also, bi-orthogonal decoder implemented by only adder/subtractor is proposed. The hardware resources for implementation are reduced in the proposed receiver architecture, although bit error rate performance is low compared with the receiver architecture based on the matched filter.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.9
• /
• pp.4549-4567
• /
• 2016

To cope with the complex electromagnetic environment of wireless communication systems, anti-jamming decision methods are necessary to keep the reliability of communication. Basing on the rule-reduced genetic algorithm (RRGA), an anti-jamming decision method is proposed in this paper to adapt to the fast channel variations. Firstly, the reduced decision rules are obtained according to the rough set (RS) theory. Secondly, the randomly generated initial population of the genetic algorithm (GA) is screened and the individuals are preserved in accordance with the reduced decision rules. Finally, the initial population after screening is utilized in the genetic algorithm to optimize the communication parameters. In order to remove the dependency on the weights, this paper deploys an anti-jamming decision objective function, which aims at maximizing the normalized transmission rate under the constraints of minimizing the normalized transmitting power with the pre-defined bit error rate (BER). Simulations are carried out to verify the performance of both the traditional genetic algorithm and the adaptive genetic algorithm. Simulation results show that the convergence rates of the two algorithms increase significantly thanks to the initial population determined by the reduced-rules, without losing the accuracy of the decision-making. Meanwhile, the weight-independent objective function makes the algorithm more practical than the traditional methods.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.3
• /
• pp.517-526
• /
• 2000

In this paper, we propose the trellis coded spread spectrum communication system with one channel signal selection of the subset by the PN code. This paper proposes the Viterbi decoder that have the squared Euclidean distance of the order phase difference as well as 1st order phase difference as the branch metrics by using the multiple symbol detection method. TCM method was developed to overcome limited power and bandwidth efficiently in digital communication. we multiply one of convolution code's output data to PN code for applying TCM to the spread spectrum. We investigated the performance of the direct sequence/spread spectrum communication system with trellis coded modulation. In this system, we could improved the coding gain in the spread spectrum.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.5
• /
• pp.565-570
• /
• 2015

Spread spectrum communications have increased interest due to their immunity to channel fading and low probability of intercept. One of the limitations of the traditional digital spread spectrum systems is the need for spreading code synchronization. Chaotic communication is the analogue alternative of digital spread spectrum systems beside some extra features like simple transceiver structures. In this paper, This paper was used instead of the digital modulation and demodulation carriers for use in the chaotic signal in a digital communication system among the chaotic modulation schemes, the Differential Chaos Shift Keying(DCSK) is the most efficient one because its demodulator detects the data without the need to chaotic signal phase recovery. Also Implementation of Differential Chaos Shift Keying Communication System Using Matlab/Simulink and the receiver con decode the binary information sent by the transmitter, performance curves of DCSK are given in terms of bit-error probability versus signal to noise ratio with spreading factor as a parameter and we compare it to BPSK modulation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.5
• /
• pp.887-894
• /
• 2016

In the underwater acoustic communication channels, a multipath reflection becomes the cause of obstacle. To solve this problem, a rake receiver has been required for which one could take the time diversity. However, there is a concern about using incorrect path to recover signals with a high weighting value as underwater acoustic communication channels have severe time-variant property. In order to prevent these problem, a rake receiver is proposed which is based on BER(bit error rate) train sequence duration. The performance is evaluated through lake trials; there are three methods that are a proposed rake receiver, a conventional rake receiver, and a non-rake receiver. As a result, the number of bit errors in the proposed rake receiver, that of bit errors in the conventional rake receiver, and that of bit errors in the non-rake receiver is 8, 45, and 72, respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.7
• /
• pp.1425-1431
• /
• 2005

In this paper, we consider the ISR(Intelligence, Surveillance, and Reconnaissance) system which collects the imagery intelligence from an airplane and CDL(common data link) communication system which transports the information obtained by the ISR system. The IMINT(imagery intelligence) consists of MPEG-2 transport stream packets and they transmit through CDL. We have some simulations for communication performances of CDL and show performance improvements using convolutional coding. We have compared BER performances under AWGN channel and fading channel which is caused by the velocity of an airplane.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.754-757
• /
• 2007

In this paper, we present an implementation and it's real-sea test of an underwater acoustic data communication system, which allows the system to reduce complexity and increase robustness in time variant underwater environments. For easy adaptation to complicated and time-varying environments of the ocean, all-digital transmitter and receiver systems were implemented. For frame synchronization the CAZAC sequence was used, and QPSK modulation/ demodulation method with carrier frequency of 25kHz and a bandwidth of 5kHz were applied to generate 10kbps transmission rate including overhead. To improve transmission quality, we used several techniques and algorithms such as adaptive beamforming, adaptive equalizer, and convolution coding/Viterbi decoding. for the verification of the system performance, measurement of BER has been done in a very shallow water with depth of 8m at JangMok, Geoje. During the experiment, image data were successfully transmitted up to about 7.4km.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.3
• /
• pp.365-371
• /
• 2014

It is essential for the combined military weapon system to be equipped with interoperability for the efficient combat operation in the modern warfare environment. Since most of modern military systems utilize the electromagnetic wave for the radio communication in the network-centric warfare system, they can be vulnerable to the mutual interference among the adjacent combined military systems. In this paper, the typical radio communication systems are modeled with the modulation types of both spread and non-spread spectrum system. The various interference signals were generated for the simulation of the mutual interference influence from the adjacent radar and communication systems. The simulation results show that the detection performance of the victim communication receiver is seriously affected by the various interferences such as the types of modulation and the ratio of the overlapping bandwidth of the adjacent interferers. This result will be useful for defining the criteria of the interference protection in the combined military system for the interoperability in the future.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.2
• /
• pp.18-24
• /
• 2010

A correct and accurate model of optical data storage systems is very important in development and performance evaluation of various data detection algorithms. In this paper, we present an nonlinear modeling scheme of a super-resolution near-field structure (Super-RENS) read-out signal using the canonical piecewise-linear (PWL) and the second-order Volterra models. Nonlinear equalizers may be developed on the basis of the information obtained from this nonlinear modeling. To mitigate the nonlinear inter-symbol interference (ISI), we proposed a new nonlinear equalizer for Super-RENS discs. Its validity is tested with the RF signal samples obtained from a Super-RENS disc. The experiment results verified the possibility that the canonical PWL and the second-older Volterra models can be utilized for nonlinear modeling of Super-RENS systems. The proposed equalizers are superior to the one without equalization in terms of bit error rate (BER).