• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.2A
• /
• pp.86-95
• /
• 2003

With the advent of future mobile communication systems, the wireless transmission of the huge amount of multimedia data over the error-prone multipath fading channel has to overcome the inherent sensitivity to channel errors. To alleviate the effect of the channel errors, hosts of techniques based on the forward error correction(FEC) has been proposed at the cost of overhead rate. Among the FEC techniques, turbo code, whose performance has been shown to be very close to the Shannon limit, can be classified as a block-based error correction code. In this paper, considering the variable packet size of the multimedia data, we analyzed turbo codes employing the variable-sized interleaver. The effect of the various parameters on the BER performance is analyzed. We show that the turbo codes can be used as efficient error correction codes of multimedia data.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.3
• /
• pp.1-8
• /
• 2000

This paper presents a simulation model of the Quadrature detector to demodulate FSK signal, which is widely used in wireless paging system for its simple hardware implementation and economics of It fabrication. Quadrature detecter has nonlinear phase characteristic for changes linear changes of input signal frequency. So until now Quadrature detector system analysis remained a difficult problem and performance analysis has not been carried out adequately On these backgrounds, this paper presents the FSK signal demodulation process using Quadrature detector and optimal performance derived from digital simulation technique. First, PSN(Phase Shift Network) which is composed of analog RLC tank circuit is transformed into its equivalent digital transfer function using First-order-hold theorem. Though the demodulated outputs of the Quadrature detector for 4FSK are 4-level signals, only 2 comparators are used and it is shown that optimal performance can be obtained by choosing operation parameter Q value and threshold level decision which are proposed herein.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.9B
• /
• pp.1542-1550
• /
• 2000

Fiber optic link systems based on SCM scheme are widely used as efficient and economic RF signal links between base station and a central station in mobile communication networks. However, its performance can be seriously limited depending on the operational conditions of not only the optical transmission system but also the wireless link in various environments. In this paper, we propose an analytic model for performance analyses of the SCM fiber optic link for CDMA RF signal transmission in various link environments. We present optimal operational conditions taking account of the nonlinear effects of the optical transmission system, and the multiple access interference produced at the wireless link. It has been shown through the BER analyses in this paper that the selection of optical modulation index of the SCM fiber optic links can be found optimally to minimize the fiber optic link noises and intermodulation distortion due to LD.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.4
• /
• pp.347-352
• /
• 2007

This paper describes the design and implementation of PFM(Proto Flight Model, PFM) of DRE(Data Receiving Equipment, DRE) for Science and Technology Satellite 2(STSAT-2) and the results of integration performance test. DRE components are X-band receiver, DCE(Data Combine Equipment, DCE) and RAC(Receiving and Archiving Computer, RAC). DCE consists of I&Q data combiner and ECL signal distributor. RAC consists of DRC(Data Receiving Card) and ST2RAS(STSAT-2 Receiving and Archinving Software). X-band receiver receives 10Mbps QPSK I, Q satellite data and sends the data to DCE. DRC stores the I&Q combine data from DCE to RAID. The pre-processing program sorts and stores to satellite status data and payload data. The performance of DRE in the functional and space environments test satisfies the requirements of STSAT-2.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.7
• /
• pp.1531-1538
• /
• 2015

In this paper, we proposed receiver structure based on an iterative turbo equalization to cope with phase difference between two sensors in MIMO underwater communication channel. In a space-time coded system, it is often assumed that there are no phase errors among the multiple transmitter and receiver chains. In this paper, we have studied the effect of the phase errors between different transmit sensors and different propagation paths in the environment of MIMO underwater communication system, and have shown through BER performance by computer simulations that the bit-error-rate performance can be severely degraded. A decision-directed estimation and compensation algorithm has been proposed to minimize their effects on the system performance. In this paper, we investigate the phase differences and their effects on multiple-input and multiple-output systems, and propose a compensation algorithm for underwater channel model to minimize their effects.

• Journal of electromagnetic engineering and science
• /
• v.6 no.2
• /
• pp.83-91
• /
• 2006

In this paper, we develop space-time(ST) Rake receivers for Time Division Synchronous Code Division Multiple Access(TD-SCDMA) base stations(BS). The beamforming of BS transforms the uplink MIMO channel space into many sub-sectors' channels to be nearly orthogonal, thus, well established 1-D Rake technology can be used to TD-SCDMA base station to construct ST Rake, which simplified the system's implementation as well as enlarged users' capacity by the beamforming. The construction and capacity of MIMO sub-sectors by multi-beamforming have been presented. The proposed ST Rake algorithm include the multi-beamforming algorithm for MIMO sub-sectors and classical 1-D Rake algorithm. The calculating formulas for interference plus noise ratio(SINR) and bit error rate(BER) have been derived. Simulations verify that the proposed ST Rake receiver for BS is effective, and the BS systems can get higher system capacity and can be of better performance than presented TD-SCDMA systems.

• Journal of Communications and Networks
• /
• v.1 no.3
• /
• pp.182-188
• /
• 1999

The optimal joint maximum-likelihood sequence estima-for using an array of antennas is derived for synchronous direct sequence-code division multiple access (DS-CDMA) system. Each user employs a rate 1/n convolutional code for channel coding for the additive white Gaussian noise (AWGN) channel. The array re-ceiver structure is composed of beamformers in the users' direc-tions followed by a bank of matched filters. The decoder is imple-mented using a Viterbi algorithm whose states depend on the num-ber of users and the constraint length of the convolutional code. The asymptotic array multiuser coding gain(AAMCG)is defined to encompass the asymptotic multiuser coding gain and the spatial information on users' locations in the system. We derive the upper and lower bounds of the AAMCG. As an example, the upper and lower bounds of AAMCG are obtained for the two user case where each user employes the maximum free distance convolutional code with rate 1/2. The enar-far resistance property is also investigated considering the number of antenna elements and user separations in the space.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.12C
• /
• pp.1217-1224
• /
• 2003

In this paper, we propose an edge side-lobe suppressor (ESS) for the uplink of OFDMA systems, which mitigates the interference introduced by different frequency offsets between a desired user and the other users. We evaluate the proposed ESS scheme by measuring average signal to interference ratio (SIR) and average bit error rate (BER). The simulation results confirm that the proposed ESS scheme improves system performance by approximately 5∼10 dB SIR as compared to conventional OFDMA systems. Because the additional operations for the proposed scheme can be performed by a real-valued look-up table, the implementation of the ESS hardly requires increasing transmitter and receiver complexity.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.06d
• /
• pp.319-321
• /
• 2006

본 논문에서는 블록 FEC(Forward Error Correction) 알고리즘을 적용한 IEEE 802.11e MAC(Medium Access Control)의 블록전송모드(Block Transfer Mode)의 성능을 분석한다. 성능 향상을 위해서 IEEE 802.11e MAC은 TXOP(Transmission Opportunity)시간 동안 특정 스테이션(station)에게 독점적인 전송 기회를 부여하며, 이 기간동안 하나의 블록 즉 연속적으로 여러 개의 데이터 프레임(frame)을 전송한다. 수신자는 블록내의 각 프레임에 수신 여부를 블록 ack (block Acknowledgment)방식, 즉 하나의 ack 패킷이 모든 수신 프레임의 일련번호를 모아 알려 준다. 그러나 오류가 빈번한 무선 채널 환경에서는 블록 ack 방식을 사용하더라도 빈번한 재전송으로 인해 채널의 성능이 현저히 감소한다. 이러한 문제를 해결하기 위해 심볼 단위로 오류를 복원하는 블록 FEC 알고리즘을 적용할 수 있는데, 본 논문에서는 802.11e에서 FEC 알고리즘을 적응하는 두 가지 방식의 성능을 해석적으로 분석한다. 즉 두 가지 방식은 프레임 당 블록 FEC를 적용하는 방법과 전체 블록 내의 프레임을 하나의 데이터로 간주하여 FEC를 적용하는 방식이다. 본 논문에서는 이 들 두 가지 방식의 채널 성능 향상 정도와 블록 ack만을 사용한 경우의 성능을 수식적으로 계산한다. 실험에 의하면 BER이 $10^{-4}$인 채널 환경에서 블록 FEC를 적용한 방식이 블록 ack를 사용한 방식에 비해 약 1.5%의 성능향상을 보인다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.1
• /
• pp.38-44
• /
• 2011

Remanufacturing is restoring or manufacturing the worn-out or discarded components of an end of life product in order to bring it to the "like new" condition. The aim is to reprocess used products in such a manner that the quality of the products is as good as or better than the new one, in terms of appearance, reliability and performance. This paper investigates the automotive remanufacturing industry in Europe. To further knowledge in this field, the paper focuses on the remanufacturing of the automotive components of end-of-life vehicles. The paper scope emphasizes key remanufacturing companies, which are identified and were surveyed in terms of their business structures. The research aims to address the potential for growth within the remanufacturing industry, with regard to various players. The state of the art in remanufacturing of automotive equipment will be identified.