• 한국환경농학회지
• /
• 제5권2호
• /
• pp.135-140
• /
• 1986

K-bentonite를 K포화용액에서 이온교환법에 의해 제조했다. 모래땅, 황토, 산흙에서 K-bentonite 완효성의 효과를 비교 시험했는데, 특히 모래땅에서 그 효과가 컸다. 알타리무우 및 상치를 이용한 모래땅 재배에서 KCl시용구. 보다 K-bentonite구는 상치의 지상부의 생육과 알타리무우의 근부신장을 월등히 촉진 시켰다. 그러나 적정량을 관수하면서 모래, 산흙, 황토를 이용한 온실내 pot시험에서는 생육차를 발견할 수 없었다. K-bentonite는 무우 및 상치의 Vitamin C, Nitrate, Thiocyanate, Dry wt 등의 함량변화에 영향을 미치지 않았다. K-bentonite 실제 생산에 있어 문제점에 대해 논의하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.179-187
• /
• 2009

Bentonite-based grouting has been popularly used to seal a borehole installed for a closed-loop vertical ground heat exchanger in a geothermal heat pump system (GHP) because of its high swelling potential and low hydraulic conductivity. The bentonite-based grout, however, has relatively lower thermal conductivity than that of ground formation. Accordingly, it is common to add some additives such as silica sand to the bentonite-based grout for enhancing thermal performance. In this study, graphite is adapted to substitute silica sand as an addictive because graphite has very high thermal conductivity. The effect of graphite on the thermal conductivity of bentonite-based grouts has been quantitatively evaluated for seven bentonite grouts from different product sources. In addition, comparisons of viscosity between applications of graphite and silica sand as additives has been carried out. In conclusion, using graphite has thermal conductivity about three times higher than that of silica sand.

• 한국관개배수논문집
• /
• 제5권1호
• /
• pp.63-74
• /
• 1998

This study was performed to evaluate the hydraulic conductivity of sand-bentonite mixtures according to 8 kinds of the bentonite content using the reassembled air-entry permeameter. Results obtained are as follows: 1. The maximum dry density and optimum m

• 한국농공학회지
• /
• 제43권2호
• /
• pp.122-131
• /
• 2001

When mixed with lime, sand-bentonite mixture is characterized by considerable hydraulic properties similar to natural pozzolans and may therefore be increased in the strength of sand-bentonite mixture. The present study reports that results obtained in a series of laboratory tests carried out using particular mixing ratio of lime-sand-bentonite with the aim of investigating physical characteristics, permeability and strength. The results were compared and analyzed according to hydration time and lime content. Test results showed that increasing of strength and decreasing of permeability by proper lime content. Curing for longer periods increased unconfined compressive strength of mixture. Based on results of the falling head permeability test, mixtures of lime content 3%, 6% and 9% were satisfied in using as liner after 8-day curing periods.

• 한국주조공학회지
• /
• 제4권1호
• /
• pp.12-20
• /
• 1984

In order to investigate the effect of size of sand grains, bentonite content and moisture on mixing power, standard mixing power, permeability, green compressive strength and green mold hardness were measured with mixing time, and also coated layer of mixed sand with time was observed by optical microscope and scanning electron microscope. From this experiment, the results were summarized as follows. 1. Mixing power increased as size of sand grains decreased. 2. Mixing power increased gradually as bentonite content increased and in particular, increased rapidly in 7-10% bentonite. 3. Mixing power increased as moisture content decreased. 4. The mixing time required to get the optimum mixing power decreased as moisture content and grain size increased, but increased as bentonite content increased.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.713-718
• /
• 2006

This paper concerns the measurement of thermal conductivity of grouting materials for ground loop heat exchanger. A thermal conductivity meter, QTM-500 based on modified transient hot wire method was used to measure the thermal conductivity of neat bentonite and mixtures of bentonite and various additives. Relative to the total mixture mass, as the percent additive was increased the mixture thermal conductivity increased. For the bentonite-silica sand mixtures, the higher density of the sand particles resulted in much higher mixture thermal conductivity.

• Environmental Engineering Research
• /
• 제25권1호
• /
• pp.96-103
• /
• 2020

The aim of this study is to investigate the effect of five different combinations including: sand 70%, bentonite 30% (S₇₀B₃₀)- sand 80%, bentonite 20% (S₈₀B₂₀)- sand 80%, organophilic 20% (S₈₀M₂₀)- sand 60%, bentonite 20%, organophilic 20% (S₆₀B₃₀M₂₀) and sand 75% - bentonite 15% - organophilic 10% (S₇₅B₁₅M₁₀) on landfill linear structure in order to decrease phenol leaching. Hydraulic conductivity and adsorption behavior of the samples were investigated. The results demonstrated that the lowest hydraulic conductivity coefficient ($1.16{\times}10^{-11}{\frac{m}{s}}$) was obtained for S₇₀B₃₀. Furthermore, adding more than 20% of bentonite had no significant effect on reducing permeability. Moreover, Freundlich isotherm was introduced as the best model explaining adsorption behaviour due to its highest determination coefficient (0.945). The best samples for adsorption capacity of phenol and for both permeability and adsorption are S₈₀M₂₀ and S₆₀B₃₀M₂₀, respectively. Although the presence of bentonite was effective in reducing hydraulic conductivity, organic clay had no considerable impact on reducing permeability. Though, it's an exceptional role in adsorbing organic contaminants including phenol cannot be ignored. To meet all regulatory constraints, the optimal compound is made up of 10.2% of bentonite and 2.8% of organophilic clays with a minimized cost of 13.64 ($/ton).

• Nuclear Engineering and Technology
• /
• 제56권9호
• /
• pp.3884-3897
• /
• 2024

This study investigates the creep behavior of bentonite-sand mixtures as potential buffer materials for low-level radioactive waste (LLW) repositories, with a specific case study in Taiwan. To assess the long-term hydro-mechanical properties, constant-volume swelling pressure, hydraulic conductivity, strain-controlled shear, and stress-controlled shear tests were conducted on MX80 and KV1 bentonite-sand mixtures. The experimental results indicate that MX80-sand 70/30 mixtures are prioritized as the buffer materials with 2.10 MPa swelling pressure and 1 × 10^-13 m/s hydraulic conductivity. However, the shear strength of mixtures was reduced by almost 50 % when fully saturated. Furthermore, this study proposed a novel stress-controlled direct shear apparatus to retrieve the creep model parameters. The numerical method based on the creep model efficiently supports and simulates the saturation process and creep displacement. The finite element method (FEM) result predicts that the buffer of both bentonite-sand mixtures will achieve an average degree of saturation of 95 % at the end of three decades and full saturation in 100 years. The simulated creep displacement results at key nodes suggest that both top and bottom parts in the buffer, assembled from MX80-sand 70/30 mixtures or KV1-sand 70/30 mixtures, will have almost equivalent values of 4 mm in the horizontal and 2 mm in the vertical directions eventually.

• 한국주조공학회지
• /
• 제4권2호
• /
• pp.89-95
• /
• 1984

A Study on the Mechanical Properties of Molding Sand with Various Water/Clay Ratio A standard sample of molding sand was prepared by adding a various amount of bentonite, which has water/clay ratio from 0.4 to 0.6, into artificial sand, Hanyoung #6. The results obtained by measuring the room temperature properties of green mold are as follows. 1. This compressive strength of green molds which have 4% and 10% of bentonite decreased with increasing water/clay ratio, but the maximum strengths of 4.3 (psi) and 7.2 (psi) were observed in the samples with 6%, 8% bentonite respectively when the water/clay is 0.45. 2. The optimum water/clay ratio for strength and permeability increased from 0.4 to 0.5 with increasing clay. 3. The green compressive strength was proportional to the hardness. 4. Deformation increased with increasing water/clay ratio. 5. Flowability decreased with increasing water/clay ratio and clay content in molding sand.

• 한국주조공학회지
• /
• 제9권5호
• /
• pp.403-412
• /
• 1989

This study has been carried out to investigate into the properties of molding sands containing various core sands, $CO_2$, Shell, Furan, Pep Set and Cold Box, in the system sands using domestic active bentonite. The properties of system sands with 5% bentonite and 3% moistures containing baked core sands and no-baked core sands were varied by the ratio of core sands. The system sand containing no-baked core sands had been the poor bonding force and rough grain surface than those of the baked core sands. The L. O. I of system sand containing 30% organic binders core sands were more than inorganic binders core sands. It has been found that the no-baked core sands were necessary have to reclaim for using molding sand.