• 대한기계학회논문집
• /
• 제18권5호
• /
• pp.1126-1133
• /
• 1994

When designing an internal gear. the bending strength around pitch point as well as that at tooth root fillet should be considered because the bending stress around pitch point may occur as high as that at tooth root fillet. In this study, including stress state around pitch point, the bending strength (tensile side and compressive side) of internal gear tooth is investigated by the use of the finite element method(FEM) with regarding many influencing factors of cutter and gear geometries. Then, the critical sections around pitch point and at tooth root fillet are determined, and the simple formulae based on nominal stresses(bending, compressive, and shear) are derived for the calculations of actual stresses as the functions of tooth thicknesses and radii of curvatures of involute and fillet curve at those critical sections. The stresses calculated by the formulae agree well with those by the FEM. And the bending stresses around pitch point and at tooth root are easily estimated by the use of those formulae, therefore, those formulae are useful for the purpose of the design or the bending strength estimation of internal gear.

• 농업과학연구
• /
• 제2권1호
• /
• pp.257-264
• /
• 1975

This research was attempted as one of a study for investigating optimum contents of fly ash and briquette ash when they were used as admixtures. In mix designs of mortar, fly ash and briquette ash to cement, each of them, was mixed with 0, 5, 10, 15, 20, 25, 30 percent by weight of cement. They were tested for compressive strength, tension strength and bending strength, and these results were summarized as follows; 1. The compressive strength of mortar to add fly ash showed the maximum value at 25 percent. tension strength, 20 percent, bending strength, 15 percent. 2. In case of using briquette ash, compressive strength showed maximum strength at 15 percent. tension strength, 20 percent, bending strength, 20 percent. 3. To add fly ash showed in general more additive effect than to add briquette ash. 4. It was not only to excess standard strength but may be to develop as admixture when briquette ash was used around 20 percent.

• 드라이브 ㆍ 컨트롤
• /
• 제13권4호
• /
• pp.45-51
• /
• 2016

The power train of a hydro-mechanical, continuously variable transmission for forklifts makes use of hydro-static units, hydraulic multi-wet disc brakes & clutches, and complex helical & planetary gears. The complex helical & planetary gears are very important parts of the transmission because of a strength problem. In the present study, we calculated the specifications of the complex helical & planetary gear train, and analyzed the gear bending and compressive stresses of the gears. It is necessary to analyze the gear bending and compressive stresses thoroughly for optimal design of the complex helical & planetary gears with respect to cost and reliability. In this paper, we analyze the actual gear bending and compressive stresses of complex helical & planetary gears using the Lewes & Hertz equation, and we also verify the calculated specifications of the complex helical & planetary gears by evaluating the results of the data of allowable bending and compressive stress using the Stress vrs Number of Cycles curves of gears.

• 농업과학연구
• /
• 제3권2호
• /
• pp.214-224
• /
• 1976

양생온도(養生溫度)가 혼화재(混和材)를 사용(使用)한 모르터의 강도(强度)에 미치는 영향(影響)을 조사(調査)키 위해서 양생온도(養生溫度)를 $20^{\circ}C$, $30^{\circ}C$, $35^{\circ}C$로 하여 모르터의 압축(壓縮), 인장(引張), 곡강도시험(曲强度試驗)을 실시(實施)하였고 그 결과(結果)를 요약(要約)하면 다음과 같다. 양생온도(養生溫度) $1^{\circ}C$ 상승(上昇)에 대(對)한 강도증가(强度增加)는 기준강도(基準强度)에 대(對)하여 연탄재첨가시(添加時) 압축강도(壓縮强度)에서 1.58%, 인장강도(引張强度)에서 0.96%, 곡강도(曲强度)에서 1.26% 증가(增加)했다. 동일(同一)한 경우 플라이애쉬 첨가시(添加時) 압축강도(壓縮强度)에서 1.3%, 인장강도(引張强度)에서 0.99%, 곡강도(曲强度)에서 1.18%의 증가(增加)를 나타냈다. 압축강도(壓縮强度)는 플라이애쉬 첨가량(添加量) 25%에서 인장강도(引張强度)는 20%, 곡강도(曲强度)도 20%에서 최대치(最大値)를 나타냈다. 연탄재를 혼합(混合)한 경우 압축강도(壓縮强度)에서 20% 인장강도(引張强度)에서 15~20%, 곡강도(曲强度)에서 20% 첨가(添加)할 때 최대치(最大値)를 나타냈다. 연탄재 첨가(添加)의 경우가 플라이애쉬 첨가(添加)의 경우 보다 저강도(低强度)이나 양생온도(養生溫度)의 조절(調節)로 소요(所要)의 강도(强度)를 얻을수 있기 때문에 혼화재(混和材)로서 개발(開發)할 여지(餘地)가 충분(充分)히 있는 것으로 사료(思料)된다.

• Journal of the Korean Wood Science and Technology
• /
• 제43권3호
• /
• pp.287-294
• /
• 2015

본 연구는 4개 산지(유고슬라비아, 이탈리아, 영국, 불가리아)의 24년생 글루티노사오리나무를 대상으로 종압축 및 휨강도 특성을 규명하고, 또한 이들을 생장속도(평균연륜폭)와의 관계도 규명하였다. 압축강도는 $231{\sim}326kgf/cm^2$의 범위였고, 산지 간 차이를 보였다. 세 개 산지는 생장이 좋을수록 압축강도 및 압축영계수는 저하되는 것으로 나타났으나, Yugoslavia산지는 생장이 가장 좋으면서도 가장 높은 강도 값을 나타냈다. 휨강도는 $426{\sim}727kgf/cm^2$의 범위였고, 산지 간 차이가 있었다. 휨강도는 생장이 좋을수록 강도 및 영계수가 커지는 것으로 나타났다. 종자 산지가 다른 글루티노사오리나무 중 유고슬라비아산이 좋은 수고생장과, 다른 산지의 약 2배의 흉고직경을 나타내며, 압축, 휨강도에서도 가장 우수하여 생장과 재질면을 고려했을 때 현시점에서 가장 우수한 품종으로 판단된다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.131-132
• /
• 2017

As the building is becomes bigger and larger, it can lead to big damage in case of fire. Also, tunnel, machine room and underground joint are spaces that can cause high temperature fire above 1,350℃ in case of fire. Therefore, a refractory material is need that can be withstand in high temperatures for long time. One side, the composition of oyster shell is CaCO₃ of 90% or more. It is expected that it will be possible to use it as a high calcium natural material which is the material of the refractory board. According to, Study on bending, compressive strength of mortar according to temperature and heating time change using oyster shell as aggregate the most commonly occurring particle sizes form 2.5mm to 5mm.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.122-123
• /
• 2017

As the building is becomes bigger and larger, it can lead to big damage in case of fire. Also, tunnel, machine room and underground joint are spaces that can cause high temperature fire above 1,350℃ in case of fire. Therefore, a refractory material is need that can be withstand in high temperatures for long time. One side, the composition of oyster shell is CaCO₃ of 90% or more. It is expected that it will be possible to use it as a high calcium natural material which is the material of the refractory board. According to, Study on bending, compressive strength of mortar according to temperature and heating time change using classified oyster shell as aggregate.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.35-40
• /
• 2001

The exact solution of strength of reinforced concrete RC columns subjected to axial compression combined with biaxial bending needs trial and adjustment procedure to find the depth and inclination of the neutral axis. Thus, approximate methods of analysis and design for biaxial bending are used in practice. Load contour interprets the relation of biaxial bending and equivalent uniaxial bending by u factor which is related to material properties and column shapes. The purpose of this study is to investigate the behavior of high strength RC columns subjected to the combined axial compression and biaxial bending. Fifteen test specimens with dimensions of 200mm$\times$200mm and 4-Dl3 longitudinal steel were examined. The variable of the test is compressive strength of concrete (350, 585, 650kgf/$cm^{2}$), compression load ratio (0.2$P_{o}}$, 0.35$P_{o}}$, 0.5$P_{o}}$), and inclination of loading ($\theta$=0, 22.5, $45^{\circ}$). Test results of coefficient $\alpha$ depending on the compressive strength of concrete are compared with ACI code.

• Journal of the Korean Wood Science and Technology
• /
• 제38권2호
• /
• pp.94-100
• /
• 2010

This study was performed to develop an LRFD (Load Resistance Factored Design) Code for Domestic Larch. To accomplish his, we evaluated bending, compression, tension and shear strength. The results of the strength evaluation were utilized to verify the distribution and code conversion. For bending, tension and compressive strength, the Weibull distribution was well-fitted, but for shear strength we observed a normal distribution. For evaluating the bending and compressive strength, a full-sized specimen was used. A small clear specimen was used to test tension and shear strength. Compressive strength in particular was found to be affected by tight knots, although there was little difference between grades. In the code conversion, the design value of the LRFD was larger than the existing allowable stress value in the Korean Building Code. However, the allowable stress in this study was about two times higher than the value listed in the Korean Building Code. This result induced the difference between the soft and hard conversions. For greater reliability, the accumulation of additional data is necessary and further studies should be performed

• Composites Research
• /
• 제22권2호
• /
• pp.24-29
• /
• 2009

본 연구에서는 알루미늄 허니컴 코어와 카본 면재가 적용된 샌드위치 복합재 구조에 대해 준정적 압입 손상 이후의 잔류 강도 평가에 대한 연구를 수행하였다. 3점 굽힘 시험과 압축 시험을 통해 시편의 강도를 확인하고 시편에 손상을 모사하기 위하여 준정적 압입 손상을 가하였다. 손상된 시편을 손상 전 시편과 동일한 시험을 통해 손상 전의 강도와 비교하였다. 압입 손상 이후 압축 강도와 굽힘 강도는 압입 깊이의 증가에 따라 강도가 감소하였고 손상 단계에 따른 잔류 강도 정도를 확인하였다.