• 비파괴검사학회지
• /
• 제33권2호
• /
• pp.138-146
• /
• 2013

본 논문에서는 두꺼운 배관에 존재하는 비 이상화된 원주방향 관통균열의 탄성 응력확대계수 해를 제시하였다. 이를 위해 3차원 탄성 유한요소해석을 수행하였으며, 배관의 형상 및 비 이상화된 원주방향 관통균열의 영향을 고려하기 위해 배관의 두께, 기준균열길이 및 관통균열길이 비를 체계적으로 변화시켰다. 하중 조건으로는 인장하중, 굽힘모멘트 및 내압을 고려하였다. 또한 본 논문에서는 이상화된 원주방향 관통 균열로부터 비 이상화된 원주방향 관통균열의 응력확대계수를 쉽게 계산하기 위해 관통균열 보정계수를 제시하였다. 본 논문의 결과는 실제 균열성장거동을 고려하여 원자력 배관의 배관파단확률을 보다 정확하게 계산하기 위해 적용될 수 있다.

• Structural Engineering and Mechanics
• /
• 제18권6호
• /
• pp.807-829
• /
• 2004

The Element-Based Lagrangian Formulation of a 9-node resultant-stress shell element is presented for the isotropic and anisotropic composite material. The effect of the coupling term between the bending strain and displacement has been investigated in the warping problem. The strains, stresses and constitutive equations based on the natural co-ordinate have been used throughout the Element-Based Lagrangian Formulation of the present shell element which offers an advantage of easy implementation compared with the traditional Lagrangian Formulation. The element is free of both membrane and shear locking behavior by using the assumed natural strain method such that the element performs very well in thin shell problems. In composite plates and shells, the transverse shear stiffness is defined by an equilibrium approach instead of using the shear correction factor. The arc-length control method is used to trace complex equilibrium paths in thin shell applications. Several numerical analyses are presented and discussed in order to investigate the capabilities of the present shell element. The results showed very good agreement compared with well-established formulations in the literature.

• Structural Engineering and Mechanics
• /
• 제48권4호
• /
• pp.547-567
• /
• 2013

Nonlinear behavior of functionally graded material (FGM) plates under thermal loads is investigated here using an efficient sinusoidal shear deformation theory. The displacement field is chosen based on assumptions that the in-plane and transverse displacements consist of bending and shear components, and the shear components of in-plane displacements give rise to the sinusoidal distribution of transverse shear stress through the thickness in such a way that shear stresses vanish on the plate surfaces. Therefore, there is no need to use shear correction factor. Unlike the conventional sinusoidal shear deformation theory, the proposed efficient sinusoidal shear deformation theory contains only four unknowns. The material is graded in the thickness direction and a simple power law based on the rule of mixture is used to estimate the effective material properties. The neutral surface position for such FGM plates is determined and the sinusoidal shear deformation theory based on exact neutral surface position is employed here. There is no stretching-bending coupling effect in the neutral surface-based formulation, and consequently, the governing equations and boundary conditions of functionally graded plates based on neutral surface have the simple forms as those of isotropic plates. The non-linear strain-displacement relations are also taken into consideration. The thermal loads are assumed as uniform, linear and non-linear temperature rises across the thickness direction. Closed-form solutions are presented to calculate the critical buckling temperature, which are useful for engineers in design. Numerical results are presented for the present efficient sinusoidal shear deformation theory, demonstrating its importance and accuracy in comparison to other theories.

• Geomechanics and Engineering
• /
• 제34권3호
• /
• pp.233-250
• /
• 2023

This paper investigates the flexural analysis of isotropic, transversely isotropic, and laminated composite plates using a new higher-order normal and shear deformation theory. In the present theory, only five unknown functions are involved compared to six or more unknowns used in the other similar theories. The developed theory does not need a shear correction factor. It can satisfy the zero traction boundary conditions on the top and the bottom surfaces of the plate as well as account for sufficient distribution of the transverse shear strains. The thickness stretching effect is considered in the computation. A simply supported was considered on all edges of the plate. The plate is subjected to uniform and sinusoidal distributed load in the static analysis. Laminated composite, isotropic, and transversely isotropic plates are considered. The governing equations are obtained utilizing the virtual work principle. The differential equations are solved via Navier's procedure. The results obtained from the developed theory are compared with other higher-order theories considered in the previous studies and 3D elasticity solutions. The results showed that the proposed theory accurately and effectively predicts the bidirectional bending responses of laminated composite plates. Several parametric studies are presented to illustrate the various parameters influencing the static response of the laminated composite plates.

• 농촌의학ㆍ지역보건
• /
• 제44권4호
• /
• pp.209-219
• /
• 2019

이 연구는 치과위생사의 직무스트레스와 상지의 근골격계 기능 장애의 관련성을 알아보고자 수행하였다. 연구 대상자는 부산·경남 지역의 병원급 이상, 치과의원에 근무하는 치과위생사를 220명을 편의 표집하여 설문지를 배포한 후 최종 수거된 200부에서 응답이 부실한 2부를 제외하고 최종적으로 198명의 자료를 분석하였다. 설문문항으로는 일반적 특성, 직무스트레스, 작업관련 상지 근골격계 통증, 동작수행능력에 따른 기능평가 문항으로 구성하였다. 치과위생사의 대한 상지근골격계질환 통증은 목 39.4%, 어깨 54.6%, 팔/팔꿈치 14.7%, 손/손목/손가락 50.0% 였다. 그리고, 상지의 기능 장애는 치과위생사에서 호발하는 건강관련 문제로 불편한 작업자세와 상지 부위별 근골격계 통증을 보정하더라도 직무스트레스와 유의한 관련이 있었다. 즉, 팔꿈치를 굽혔다 펴는 반복 작업, 팔꿈치 부위에 통증이 있는 경우외에도 직무스트레스 역시 상지의 기능 장애와 관련이 있었다. 치과위생사의 직무스트레스는 이들의 상지 기능 장애로 이어져 결과적으로 의료서비스의 저하로 이어지므로, 장단기 계획하에 근무환경개선 등을 통하여 직무 스트레스를 감소시킬 수 있는 방안을 모색하여야 할 것이다.

• Geomechanics and Engineering
• /
• 제16권3호
• /
• pp.257-271
• /
• 2018

In this paper, the effect of the homogenization models on buckling and free vibration is presented for simply supported functionally graded plates (FGM) resting on elastic foundation. The majority of investigations developed in the last decade, explored the Voigt homogenization model to predict the effective proprieties of functionally graded materials at the macroscopic-scale for FGM mechanical behavior. For this reason, various models have been used to derive the effective proprieties of FGMs and simulate thereby their effects on the buckling and free vibration of FGM plates based on comparative studies that may differ in terms of several parameters. The refined plate theory, as used in this paper, is based on dividing the transverse displacement into both bending and shear components. This leads to a reduction in the number of unknowns and governing equations. Furthermore the present formulation utilizes a sinusoidal variation of displacement field across the thickness, and satisfies the stress-free boundary conditions on the upper and lower surfaces of the plate without requiring any shear correction factor. Equations of motion are derived from Hamilton's principle. Analytical solutions for the buckling and free vibration analysis are obtained for simply supported plates. The obtained results are compared with those predicted by other plate theories. This study shows the sensitivity of the obtained results to different homogenization models and that the results generated may vary considerably from one theory to another. Comprehensive visualization of results is provided. The analysis is relevant to aerospace, nuclear, civil and other structures.

• Geomechanics and Engineering
• /
• 제10권3호
• /
• pp.357-386
• /
• 2016

In this research work, an exact analytical solution for thermal stability of solar functionally graded rectangular plates subjected to uniform, linear and non-linear temperature rises across the thickness direction is developed. It is assumed that the plate rests on two-parameter elastic foundation and its material properties vary through the thickness of the plate as a power function. The neutral surface position for such plate is determined, and the efficient hyperbolic plate theory based on exact neutral surface position is employed to derive the governing stability equations. The displacement field is chosen based on assumptions that the in-plane and transverse displacements consist of bending and shear components, and the shear components of in-plane displacements give rise to the quadratic distribution of transverse shear stress through the thickness in such a way that shear stresses vanish on the plate surfaces. Therefore, there is no need to use shear correction factor. Just four unknown displacement functions are used in the present theory against five unknown displacement functions used in the corresponding ones. The non-linear strain-displacement relations are also taken into consideration. The influences of many plate parameters on buckling temperature difference will be investigated. Numerical results are presented for the present theory, demonstrating its importance and accuracy in comparison to other theories.