• Structural Engineering and Mechanics
• /
• v.20 no.2
• /
• pp.161-172
• /
• 2005

This paper presents the section model for analysis of RC circular tower structures based on nonlinear material laws. The governing equations for normal strains due to the bending moment and the normal force are derived in the case when openings are located symmetrically in respect to the bending direction. In this approach the additional reinforcement at openings is also taken into account. The mathematical model is expressed in the form of a set of nonlinear equations which are solved by means of the minimization of the sums of the second powers of the residuals. For minimization the BFGS quasi-Newton and/or Hooke-Jeeves local minimizers suitably modified are applied to take into account the box constraints on variables. The model is verified on the set of data encountered in engineering practice. The numerical examples illustrate the effects of the loading eccentricity and size of the opening on the strains and stresses in concrete and steel in the cross-sections under consideration. Calculated results indicate that the additional reinforcement at the openings increases the resistance capacity of the section by several percent.

• Journal of the Ergonomics Society of Korea
• /
• v.22 no.4
• /
• pp.47-57
• /
• 2003

This study investigated the recruitment patterns of ten trunk muscles in isometric exertion tasks, focused on the functional roles (agonist or antagonist). Twelve male students performed maximum voluntary isometric exertion tasks towards six directions: flexion/extension, left/right lateral bending, and clockwise/counter-clockwise twisting. EMG signals from ten trunk muscles and exertion forces were collected. Normalized EMG (NEMG) values were calculated at 10, 20, 30, 40, 50, 60, 70, 80, and 90 %MVC. The subjects showed a limited capacity in producing twisting moments, approximately 50% of the extension moment, and 70% of lateral bending moments. EMG activity was dependent on the direction and magnitude of the exertion, and also on the functional role. The mean NEMG of agonist was 0.260 and 0.067 for antagonist. Agonists showed the highest mean NEMG in flexion (0.367), while antagonists showed the highest mean NEMG in twisting clockwise/counter-clockwise (0.090/0.106).

• Steel and Composite Structures
• /
• v.10 no.2
• /
• pp.109-128
• /
• 2010

The expediency of using tubular composite steel and concrete columns of annular cross-sections in construction is discussed. The new type space framework with tubular composite columns of multi-storey buildings and its rigid beam-column joints are demonstrated. The features of interaction between the circular steel tube and spun concrete stress-strain states during the concentrical and eccentrical loading of tubular composite members are considered. The modeling of the bearing capacity of beam-columns of composite annular cross-sections is based on the concepts of bending with a concentrical force and compression with a bending moment. The comparison of modeling results for the composite cross-sections of beam-columns is analysed. The expediency of using these concepts for the limit state verification of beam-columns in the methods of the partial safety factors design (PSFD) legitimated in Europe and the load and resistance factors design (LRFD) used in other countries is presented and illustrated by a numerical example.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.133-133
• /
• 2017

Lodging is one of the important constraints in rice production. The lodging destroys the canopy structure, and sharply reduces the capacity of photosynthetic rate and dry matter production. In cereal crops, stem lodging can be classified into two types: stem breaking type and stem bending type. To improve stem lodging resistance, it is important to reveal strong culm traits of superior lodging resistant varieties. There are large varietal differences in parameters associated with the bending moment at breaking (M) and flexural rigidity (FR). The indica variety Takanari possesses large M due to its large section modulus (SM) despite of its small bending stress (BS), while Takanari also has large FR due to its large secondary moment of inertia (SMI) and Young's modulus (YM). To identify quantitative trait loci (QTLs) and the corresponding genes associated with the parameters for M ($=SM{\times}BS$) and FR ($=SM{\times}YM$) should enable to develop lodging resistant varieties, efficiently. In order to identify QTLs for cell wall materials such as cellulose, hemicellulose and lignin associated with BS and YM, a set of Chromosome Segment of Substitution Lines (CSSLs) consisted of 37 lines with chromosome segments of Koshihikari in the genetic background of Takanari were used. Takanari had large M and small BS as compared with Koshihikari. The QTLs for BS were estimated on chromosomes 3, 5, 6, 8, 9, 10, 11 and 12. Koshihikari alleles increased BS in these QTLs. Takanari had a large FR due to its large SMI and YM as compared with Koshihikari. The YM was increased by substitution of the Koshihikari chromosomal segments on chromosomes 2, 10 and 11. Other QTLs estimated on chromosomes 7 and 12 that Koshihikari alleles contributed to the decrease of YM. For lignin, only one major QTL for lignin density was detected on chromosome 11. Hollocellulose densities were increased by the substitution of Koshihikari segments on chromosomes 5 and 11. On the other hand, these were decreased on chromosomes 1 and 3 by substitution of Koshihikari segments. QTLs for cellulose density were estimated on chromosomes 1, 3 and 5 by substitution of Koshihikari segments. For hemicellulose, QTL on chromosome 3 showed that hemicellulose density decreased by the substitution of Koshihikari segment. However, hemicellulose densities on chromosomes 5, 8 and 11 showed the opposite effects. The QTLs for hemicellulose, cellulose, and hollocelulose densities identified on chromosome 5 overlapped with that for bending stress, indicating the positive effect of Koshihikari segment on increasing bending stress. These results suggest that some QTLs for the densities of cell wall materials contribute to increasing bending stress and Young's modulus, and could be utilized to improve the lodging resistance for both types of breaking and bending in rice varieties.

• Steel and Composite Structures
• /
• v.16 no.2
• /
• pp.157-185
• /
• 2014

This paper examines the behaviour of two types of practical open beam-to-tubular column connection details subjected to combined moment, axial and/or shear loads. Detailed continuum finite element models are developed and validated against available experimental results, and extended to deal with flexural, axial and shear load interactions. A numerical investigation is then carried out on the behaviour of selected connections with different stiffness and strength characteristics under various load combination scenarios. The influence of applied levels of axial tensile or compressive loads on the bending stiffness and capacity is examined and discussed. Additionally, the interaction effects between shear forces and co-existing bending and axial loads are examined and shown to be comparatively insignificant in terms of stiffness and capacity in most cases. It is also shown that the range of connections considered in this paper can provide rotational ductility levels in excess of those required under typical design scenarios. Based on these findings, a simplified component-based representation is proposed and described, and its ability to represent the connection response under combined loading is verified using results from detailed numerical simulations.

• Steel and Composite Structures
• /
• v.14 no.2
• /
• pp.173-190
• /
• 2013

The major objective of this paper is to evaluate the behavior and ultimate resisting capacity of circular CFT columns. To consider the confinement effect, proper material models with respect to the confinement pressure are selected. A fiber section approach is adopted to simulate the nonlinear stress distribution along the section depth. Material nonlinearity due to the cracking of concrete and the yielding of the surrounding steel tube, as well as geometric nonlinearity due to the P-${\Delta}$ effect, are taken into account. The validity of the proposed numerical analysis model is established by comparing the analytical predictions with the results from previous experimental studies about pure bending and eccentric axial loading. Numerical predictions using an unconfined material model were also compared to investigate the confinement effects on various loading combinations. The ultimate resisting capacities predicted by the proposed numerical model and the design guidelines in Eurocode 4 are compared to evaluate the existing design recommendation.

• International Journal of Concrete Structures and Materials
• /
• v.10 no.3
• /
• pp.373-381
• /
• 2016

As part of this study, has been developed a numerical method which allows to establish abacuses connecting the normal force with bending moment for a circular section and therefore to predict the rupture of this type of section. This may be for reinforced concrete (traditional steel) or concrete reinforced with steel fibers. The numerical simulation was performed in nonlinear elasticity up to exhaustion of the bearing capacity of the section. The rupture modes considered occur by plasticization of the steel or rupture of the concrete (under compressive stresses or tensile stresses). Regarding the fiber-reinforced concrete, the rupture occurs, usually, by tearing of the fibers. The behavior laws of the different materials (concrete and steel) correspond to the real behavior. The influence of several parameters was investigated, namely; diameter of the section, concrete strength, type of steel, percentage of reinforcement and contribution of concrete in tension between two successive cracks of bending. A comparison was made with the behavior of a section considering the conventional diagrams of materials; provided by the BAEL rules. A second comparative study was performed for fibers reinforced section.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.8 s.185
• /
• pp.154-162
• /
• 2006

By laying its drum horizontally, front-loaded washing machine mostly used in Europe that uses the head of the water to launder was appropriate for washing only small amount of laundry. However, the demands of customers are requiring front-loaded washing machine to handle big capacity laundry as well, and have faster rotation speed to increase drying ability. To meet such demands, more stress from bending and twisting are complexly loaded onto the shaft supporting the horizontal drum, causing problems in fracture strength and fatigue life. Shafting system is mainly divided into flange and shaft. Flange is located between the drum and shaft, transferring power from the shaft to drum, and acting as a supporter of the back of the drum. Shaft is connected from the flange to insert production, transferring power from the motor to drum, and mainly acting as stiffness against the horizontal weight of the shafting system. In this paper, strength analysis and experiment were executed on both the shaft and flange of front-loaded washing machine to suggest the design improvement of shafting system for big capacity, high-rotation drying. Also, verification of this evaluation was executed on fracture strength and fatigue life for studied shaft system.

• Structural Engineering and Mechanics
• /
• v.77 no.4
• /
• pp.509-521
• /
• 2021

The neighbouring gaps at the mortise-tenon joint in traditional timber structure, which leads to the complexity of the joint, are considered to impair the mechanical performance of the joint. In this paper, numerical simulation of loose joint was conducted to examine the deformation states, stress distributions, and bearing capacities, which was verified by full-scale test. On the basis of the experimental and numerical results, a simplified mechanics model with gaps has been proposed to present the bending capacity of the loose joint. Besides, the gap effects and parameter studies on the influences of tenon height, friction coefficient, elastic modulus and axial load were also investigated. As a result, the estimated relationship between moment and rotation angle of loose joint showed the agreement with the numerical results, demonstrating validity of the proposed model; The bending bearing capacity and rotational stiffness of loose joint had a certain drop with the increasing of gaps; and the tenon height may be the most important factor affecting the mechanical behaviors of the joint when it is subjected to repeated load; Research results can provide important references on the condition assessments of the existing mortise-tenon joint.

• Journal of Navigation and Port Research
• /
• v.31 no.3 s.119
• /
• pp.235-245
• /
• 2007

Stiffened steel plates are basic structural members on the deck and bottom structure in ship, offshore. It has a number of one sided stiffeners in either one or both directions, the latter structure was called grillage structure. At the ship structural desgn stage, one of the major consideration is evaluation for ultimate strength of the hull girder. In general, it is accepted that hull girder strength can be represented by the local strength of the longitudinal stiffened panel. In case of considering hogging condition in a stormy sea, stiffened panel was acting on the bottom structure under axial compressive load induced hull girder bending moment, also simultaneously arising local bending moment induced lateral pressure load. In this paper, results of the structural analysis have been compared with another detailed FEA program and prediction from design guideline and a series analysis was conducted consideration of changing parameters for instance, analysis range, cross-section of stiffener, web height and amplitude of lateral pressure load subjected to combined load (axial compression and lateral pressure load). It has been found that finite element modeling is capable of predicting the behaviour and ultimate load capacity of a simply supported stiffened plate subjected to combined load of axial compression and lateral pressure load It is expected that these results will be used to examine the effect of interaction between lateral pressure and axial loads for the ultimate load-carrying capacity based on the Ultimate Limit State design guideline.