• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2003.07a
• /
• pp.309-316
• /
• 2003

Generally, sesame are dried on the field after being harvested in Korea. Since harvesting season is rainy autumn and sesame drying is mainly affected sun and natural wind, it is difficult to dry sesame in time. Moreover, sesame threshing by hand is very laborious work. Therefore, tractor mounted sesame thresher which threshes sesame bundles fed in upside down and conveyed along threshing bar was developed to mechanize sesame threshing and to reduce labor cost in this research. the thresher was equipped with a threshing bar which beats sesame bundles and a three layer sieve which screens sesame. The results are summarized as follows ; 1 The sesame thresher was consisted of a hitting-stick, a feeding chain conveyor, a threshing bar, conveyor belt, and the three-layer shaking sieve. 2. In threshing test, prototype thresher showed maximum threshing ratio 98.5%, 98.7% at 14, 17 cpm beating rate respectively. 3. In screening test, prototype sieve showed maximum threshing ratio 97.2% at 12$^{\circ}$ of inclined angle and 220 cpm of sieve vibrating rate. 4. Prototype showed 98.7% of threshing ratio, 1.3% of threshing loss, 97.0% of screening ratio, 0.7% of screening loss on the rest condition of 15 sesame bundles/min of feeding rate, 14 cpm of beating rate, 220 cpm of sieve vibrating rate. 5. The working performance of prototype was 0.5hr/10a. It was 9.6 times more efficient than manual work. And, operation cost of prototype was saved by 45.9% compared to manual work.

• Journal of the Korean Home Economics Association
• /
• v.18 no.2
• /
• pp.1-13
• /
• 1980

When we design a dress, we should not only consider the esthetic sense and the relationship between movements of the body and the type of dress, but also the combination between the qualities and proper uses of textiles. recently the sale of ready-made clothes has been booming but I wonder whether they have been made in accordance with research concerning body movements and dresses. I would like to make the following observations on dresses, because I have personally suffered the inconvenience of restricted arm movements when wearing ready-made clothes. I have made four types types of foundations with muslin and Jersey, with these foundations I measured the degree of tension or how much the waist-line was drawn up then the arm was moved in increments of 45 degree angles and there by covering the entire span of vertical and horizontal movements. I have intended to experiment with sleeves of differing height in several ways. Concerning the movement factor, I have determined that with excessive activity vertical movements are twice as uncomfortable as horizontal movements. Concerning the faburic, I have found that because jersey has more elastic qualities than muslin, it has proven to be more responsive to body movements. concerning dresses, I have fund that the higher the height of the sleeves, the more uncomfortable it is to move the arms and the greater the degree to which the waist-line is drawn up. As a result this experiment I have made the following observations. Firstly, the vertical movement of the arms to a 180 degree angle has the most extreme influence on the breadth of movement of the waist-line. Secondly, because jersey permits freer body movements than muslin, it should be the preferred material for use in making sportswear. Thirdly, the formula A·H/4+3 of the sleev's cap height is suitable for making street dresses and formal wear. The formula A·H/5 and A·H/6 are properly used when making working clothes and sportswear, and the formula A·H/8 is proper for a sleeping garment and clothes for patients. Fourthly when deciding to any garments, it is important to consider the amount of arm movement anticipated and the relationship between the material and the degree to which the waistline is drawn up. In nder-blouse, when we raise our arms to the most extreme position, we should at that point still have 20∼25 cm of material remaining under the waist-line which includes the maximum of 14.1cm plus part of the blouse and breath of skirt's belt. In the case of the over blouse it is proper for us to have the length of 17∼20 cm remaining below the waist-line.

• Korean Journal of Agricultural Science
• /
• v.49 no.4
• /
• pp.677-696
• /
• 2022

Development of radish collectors may enhance radish production and promote upland crop mechanization in the Republic of Korea. Theoretical analysis of power is crucial to ensure the optimum design of agricultural machinery. The aim of the present study is to analyze theoretically the power requirement of a tractor-mounted radish collector under development and to propose design guidelines. The important components of the radish collector were belt-type conveyors, three hydraulic motors, and a direct current (DC) winch motor to operate the total radish collecting process. Theoretical equations were used to calculate the hydraulic motor's power, winch motor power, and draft power at loaded and unloaded conditions. A variety of tractors (44 - 74 kW) and different soil characteristics (hard, firm, tilted, and sandy) were considered to investigate the appropriate drawbar power. Variations of the power requirement of the tractor-mounted radish collector were observed due to modifications of the design parameters. The required hydraulic power of the stem cutting conveyor, stem cutting blade, and transfer conveyor of the radish collector were 0.23 and 0.24, 0.18 and 0.19, and 0.19 and 0.22 kW under unloaded and loaded conditions, respectively. The maximum draft power was calculated as 0.89, 1.07, 1.25, and 1.61 kW at a 30° tilted angle for hard, firm, tilted, and sandy soil, respectively. The calculation showed 2.07 kW DC power was required for unfolding or folding the stem-cutting conveyor. A maximum power of 4.78 kW was prescribed for conducting the whole process of the tractor-mounted radish collector. The analysis of power introduced in this study will be helpful to select the appropriate design parameters for the successful development of a tractor-mounted radish collector.

• Economic and Environmental Geology
• /
• v.28 no.6
• /
• pp.579-585
• /
• 1995

The Samkwang mine is Cretaceous gold-silver-bearing deposits located in the western part of the Ogcheon belt The ore deposits have been emplaced within granite gneiss of the Precambrian age. The Au-Ag deposits are hydrothermal-vein type, characterized by arsenic-, gold- and silver-bearing sulphides, in addition to the principal ore-forming sulphides arsenopyrite, galena, sphalerite, chalcopyrite, pyrite and pyrrhotite. Their proven reserves are 355,000 MT, and grades are 8.4 g Au/t and 13.6 g Ag/t. On the basis of their structural characters, the Au-Ag-bearing quartz veins are classified into three types of ore veins; (1) The Main vein shows $N40^{\circ}-80^{\circ}E$ strike and $55^{\circ}-90^{\circ}SE$ dip, (2) the Sangban vein shows E-W strike and $30^{\circ}-40^{\circ}S$ dip, and (3) the Gukseong vein has $N25^{\circ}-40^{\circ}W$strike and $65^{\circ}-80^{\circ}SW$ dip. The emplacements of the ore veins are closely related to the minimum stress axis $({\sigma}_3)$ during the strike-slip movement of the study area. The ore-bearing veins filled with extension fractures during strike-slip movements were sequentially emplaced as follows: I) When ${\sigma}_1$ operates obliquely to NE-series discontinous surface, the Main fault zone $(F_1)$ developes. 2) During the same time, extension fractures ($T_1$ Gukseong veins) take place. 3) When the fault progress continuously, the existing $T_1$, may be high angle and $T_2$ (Daehung vein) developes continuously. 4) When ${\sigma}_1$ changes to sinistral sense, $T_3$ (basic dyke) occurs. 5) When a reverse fault becomes active, the Sangban vein is branched from the Guksabong vein.

• Water for future
• /
• v.28 no.6
• /
• pp.147-158
• /
• 1995

The purpose of this study is to establish a method of estimating the daily urban water demand using statistical model. This method will be used for the development of the efficient management and operation of the water supply facilities. The data used were the daily urban water use, the population, the year lapse and the weather conditions such as temperature, precipitation, relative humidity, etc. Kwangju city was selected for the case study area. The raw data used in this study were rearranged either by month or by season for the purpose of analysis, and the statistical analysis was applied to the data to obtain the regression model. As a result, the multiple linear regression model was developed to estimate the daily urban water use based on the seather condition. The regression constant and the model coefficients were determined for each month of a year. The accuracy of the model was within 3% of average error and within 10% of maximum error. The developed model was found to be useful to the practical operation and management of the water supply facilities.