• 한국기계연구소 소보
• /
• 통권18호
• /
• pp.21-27
• /
• 1988

In this study, a series of experiments and analyses are performed to estimate the static characteristics of hydrostatic journal bearing such as load capacity, pressure change in each recess, eccentricity of spindle, etc. The experiments are carried out for a multi-recess type journal bearing with capillary restrictor. The Finite Element Method(FEM) is used for the analyses. The predicted load capacity under the condition of stationary or eccentric ratio of bellow 0.2 of the spindle shows excellent agreement with the measured. But, with an increase of the eccentric ratio when the spindle is rotating, the predicted load capacity is largely estimated than the measured. It seems that the difference is mainly caused among others from the fact that the effect of oil-viscosity variation due to the temperature change in the bearing is not introduced into the analyses. The analysis method proposed to estimate the static characteristics of hydrostatic journal bearing is considered to be very reliable since the predicted results are overall in good agreement with the measured.

• Journal of the korean society of oceanography
• /
• 제37권3호
• /
• pp.187-195
• /
• 2002

The characteristics of surface circulation in the Yellow Sea and the East China Sea are discussed by analyzing a great deal of current data observed by 142 sets of mooring buoy and 58 sets of drifters trajectories collected in the Yellow Sea and the East China Sea through domestic and abroad measurements. Some major features are demonstrated as bellow: 1) Tsushima Warm Current flows away from the Kuroshio and has multiple sources in warm half year and comes only from Kuroshio surface water in cold half year. 2) Taiwan Warm Current comes mainly from the Taiwan Strait Water in warm half year and comes from the intruded Kuroshio surface water and branches near 27N in cold half year. 3) The Changjiang Diluted Water turns towards Cheju Island in summer and flows southward along the coastal line in winter. 4) The study sea area is an eddy developing area, especially in the southern area of Cheju Island and northern area of Taiwan.

• 보건의료산업학회지
• /
• 제3권2호
• /
• pp.1-15
• /
• 2009

The purpose of this study is to analyze the internal factors that influence the performance of local government hospitals in Korea. There are 34 hospitals in korea as of 2008. Among these hospitals 5 are profit-making and the other loss-making in terms of profitability. Data was collected by Institute of local government hospital union. The major findings of this study was as follows : Firstly, 7 hospitals are high level, over than 100% of fixed ratio. But that result was better than the other study 5 years ago. Secondly, 29 hospitals are bellow 85% of bed occupancy rate. There are a number of hospitals didn't use the facilities and the personnel cost in total costs are high. And lastly, as a result of multiple regression analysis, the factors had on significant effect on normal profit to total assets are personnel cost(-), liability to total assets(-), average length of stay(-), outpatient visits to inpatient days(-). In conclusion, to improve the profitability of hospitals, the efforts to reduce personnel cost and to increase bed occupancy rate.

• 한국진공학회지
• /
• 제11권2호
• /
• pp.81-86
• /
• 2002

KSTAR 진공용기의 대형포트에 사용하려고 계획하고 있는 Helicoflex 개스킷의 특정 모델에 대해 플랜지 체결 특성 특히 토크(또는 선하중) 및 변형량과 기체누설률의 관계를 조사하여 기밀곡선을 구하는 실험을 수행했다. 그 결과 상온에서는 Ml8 볼트의 경우 토크 2500 kg.cm에서 Helicoflex를 채용한 플랜지의 기체누설률은 $2\times10^{-1}$ /mbar.L/s이하였다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2014년도 추계학술대회 논문집
• /
• pp.306-307
• /
• 2014

진공용 장비의 sealing 방법으로 Cu gasket을 이용한 CF type과 O-ring을 이용한 NW type이 있다. 이중 O-ring을 이용한 sealing 방법에는 clamp를 사용하게 되는데 Al 합금으로 제작된 clamp에 bellows의 수축 시 받는 전단응력과 전단응력한계 이상의 힘을 받았을 때의 clamp 파손에 따른 역압에 의한 TMP 손상 분석.

• 플랜트 저널
• /
• 제6권4호
• /
• pp.63-71
• /
• 2010

The best way to prevent the corrosion of piston rod is a selection of quality of the material and method of construction which minimize the porosity. The high velocity oxy fuel(HVOF) method, which generates lower porosity than existing plasma spray, was applied to ceramic laminated bond layer. Porosity percentage fell to bellow 2%, lower than that of plasma spray at 7%. Coating material of ceramic-coated main layer was selected as the $Cr_2O_3$ affiliation material, which is more dense than $Al_2O_3$ affiliation. To fill up the pores formed after the coating process, we sealed the bond layer and main layer. Sealing process was performed twice, once after the coating and once after the grinding. Upon the anti-corrosion test on the sealed sample and on the non-sealed sample, it is confirmed that the sealed sample was not corroded for 1,000 hours while the non-sealed sample was corroded within 48 hours.

• 대한교통학회지
• /
• 제7권2호
• /
• pp.71-87
• /
• 1989

The objectives of this study are first, to evaluate the actual performance of the Transportation Impact Assesment System of Korea, second, to find the institutional problems of the system, and third, to seek for the best improvement of the system. Total 70 assessment reports performed in 1988 and judgements of the municipal councils of the reports were inspected. And the legal system of all levels were reviewed. According to the results, there are some needs to expand the number of cities subject to the assessment system. And the several regulations about the qualification of the agents assessing transportation impacts, the composition and operation of the municipal councils, and the timing of assessing the impacts are turned out improper. A proper alternative of amendment of the regulations are recommended. And the establishment of central council for judging assessments of hudge facilities, adoption of joint assessment of facilities bellow the standard, post occupancy assess ent, and transportation fee system were also recommended.

• 한국초전도ㆍ저온공학회논문지
• /
• 제25권4호
• /
• pp.32-39
• /
• 2023

One of the main problems faced in developing India's first HTS power cable was that of shrinkage in length of the double-walled vacuum-insulated cryostat. The shrinkage was due to the evacuation of the annular vacuum space which results in a shorter working cable length. This work reports experimentally observed contraction during evacuation and analyses corrugated pipes/bellows which house the cable core of HTS cables. The effect of corrugation geometry including length, corrugation pitch and depth, diameters of corrugated pipes and thicknesses of pipes is studied numerically to realize the degree of shrinkage due to vacuum as well as chill down. Finally, necessary length compensation and associated cost is determined to tackle the shrinkage issue.

• 콘크리트학회논문집
• /
• 제29권2호
• /
• pp.141-148
• /
• 2017

본 연구는 PC부재의 공장생산에 있어서 여러 가지 증기양생 조건의 변수에 따른 고강도 콘크리트의 초기 압축강도 발현성상을 실험적으로 검증하고, 최적 양생조건을 확인하기 위한 것이다. 40 MPa 이상의 고강도 콘크리트 제조에는 보통 포틀랜드 시멘트를 사용하였으며, 콘크리트의 배합조건은 물-시멘트비 3종류(W/C 25%, 35% 및 45%)를 대상으로 하였다. 본 연구의 증기양생 변수로 (1) 전치양생 시간 3종류, (2) 최고 양생온도 3종류, (3) 최고온도 유지시간 3종류, (4) 승온 및 강온양생 온도 1종류 등을 대상으로 재령별 압축강도 시험을 실시하였다. 또한, 증기양생 및 표준양생에 따른 재령별 강도발현을 비교하였다. 실험결과, (1) 전치양생은 콘크리트의 초기 응결시간 이상, (2) 최고 양생온도는 $55^{\circ}C$ 이하, (3) 최고온도 유지시간은 6시간 이하로 하는 것이 증기양생 고강도 콘크리트의 강도발현에 적합한 양생조건으로 나타났다. 또한, 재령 28일에서 증기양생과 표준양생의 압축강도 발현성상의 역전현상이 발생하였다. 따라서 이러한 양생조건으로 PC부재의 생산성 및 현장관리를 위한 기초자료로 제시하고자 한다.

• 한국작물학회지
• /
• 제40권3호
• /
• pp.398-405
• /
• 1995

벼 자포니카 품종과 통일형 품종에 있어서 출수기가 달라질 경우 포장 조건에서 광합성 능력과 등숙량과의 관계 및 적당한 등숙온도 범위를 알기 위해 시험한 결과를 요약하면 다음과 같다. 1. 동화산물 수용기관의 크기를 결정하는 요인 중의 하나인 임실율은 출수기의 이동에 따른 차이를 보이지 않아 수량에 영향를 미치지 않았다. 2. 4가지 벼품종의 등숙양상은 8월 16일, 26일 출수할 경우 대체로 sigmoid 곡선을 보였으나 출수기가 9월 5일로 늦어질 경우 초기의 등숙속도가 빨라져 log곡선에 가까운 형태로 변하였다. 3. 자포니카에서는 생리적 성숙기가 9월 5일 출수한 경우 8월 16일, 또는 26일 출수한 것에 비해 40일로 길어졌는데 출수 30일 이후의 낮 평균온도가 17$^{\circ}C$ 정도이고 밤 평균온도가 12$^{\circ}C$ 정도이며 최저온도가 3~8$^{\circ}C$라도 10일 정도는 계속해서 등숙을 하였다. 4. 통일형의 경우 낮평균 온도가 2$0^{\circ}C$이고 밤평균 온도가 17$^{\circ}C$이며 최저기온이 1$0^{\circ}C$ 이상일 경우 소량이나마 등숙이 가능하나 최저온도가 1$0^{\circ}C$ 미만인 경우 등숙이 거의 불가능하였다. 5. 벼 잎의 광합성 능력과 포장의 온도, 상부 3엽의 면적, 일장의 적으로 나타낸 광합성양 계산치는 출수기가 달라짐에 따라 많은 차이를 보였고, 통일형의 경우 최저온도가 4$^{\circ}C$ 미만으로 떨어질 경우 광합성 능력이 0에 가까웠으며 온도가 올라가도 광합성능력이 회복되지 않았다. 6. 자포니카와 통일형 모두에 있어서 다른 조건이 좋은 경우 등숙에 적당한 온도범위는 21~26$^{\circ}C$로 나타났다.