• 응용통계연구
• /
• 제14권1호
• /
• pp.71-80
• /
• 2001

로지스틱 회귀모형은 이항 반응자료에 대한 가장 보편적인 일반화 선형모형으로 독립변수에 대한 확률함수를 추정하는데 이용된다. 많은 실제적 상황에서 확률함수가 종형의 곡선형태로 표현되는데 이 경우에는 2차항을 포함한 로지스틱 회귀모형을 이용한 분석은 대칭성을 갖는 확률함수에 대한 가정으로 인해 비대칭 형태의 종형곡선에서는 확률함수의 신뢰성이 저하되고, 2차항을 포함하기 때문에 독립변수의 효과를 설명하기가 쉽지 않다는 제한점을 가지고 있다. 본 논문에서는 이러한 문제점을 해소하기 위해서 로지스틱 회귀분석과 반복적 이분법을 이용하여 종형의 형태에 관계없이 확률곡선을 추정하는 방법론을 제안하고 모의 실험을 통해 2차항을 포함한 로지스틱 회귀모형과 비교하고자 한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1436-1441
• /
• 2004

Achieving the maximum blasting efficiency with minimum abrasive consumption is a critical concern in surface preparation stage of shipbuilding and offshore industry. Increasing the abrasive flow rate beyond the optimum point results in a major reduction in productivity even though the amount of abrasive used is larger. So, this study is intend to find out the optimum abrasive-to-air mixing ratio which can make a significant improvement in blasting efficiency and remarkably reduce the amount of abrasive used. From the test results, it can be identified that as the abrasive feeding rate is increased linearly, blasting efficiency is increased to a maximum point and then gradually decreased in the form of a bell-shaped.

• Journal of Forest and Environmental Science
• /
• 제30권1호
• /
• pp.101-106
• /
• 2014

The purpose of this research was to figure out the stand structure and growth characteristic with relation to DBH, height, and volume in sixteen Pinus koraiensis plantations of Gangwon province region. Age class was diversely distributed from age class II (16 yr) to age class VIII (77 yr), and, in terms of site index, sixteen regions were superior: nine regions 'high', seven regions 'middle'. The distribution of DBH by sites appeared a bell-shaped curve, and the number of trees was the most in diameter section of 18-22 cm. The dispersion of DBH was various with age and widest ranging from 18 cm to 58 cm in age class VII-VIII. The distribution of height was also a bell-shaped curve with the smaller deviation than the distribution of DBH, and most of trees were in height section of 14-18 m. The correlation of DBH and height was high (r=0.75), and the volume bigger than 1.0 $m^3$ was presented from DBH 35 cm, height 20 m.

• 대한조선학회논문집
• /
• 제44권5호
• /
• pp.542-550
• /
• 2007

A geometry modification is one of main keys in achieving a successful optimization. The optimized hull form generated from the geometry modification should be a realistic, faired form from the ship manufacturing point of view. This paper presents a practical hull optimization procedure using a parametric modification function. In the parametric modification function method, the initial ship geometry was easily deformed according to the variations of design parameters. For example, bulbous bow can be modified with several parameters such as bulb area, bulb length, bulb height etc. Design parameters are considered as design variables to modify hull form, which can reduce the number of design variables in optimization process and hence reduce its time cost. To verify the use of the parametric modification function, optimization for KCS was performed at its design speed (FN=0.26) and the wave making resistance is calculated using a well proven potential code with fully nonlinear free surface conditions. The design variables used are key design parameters such as Cp curve, section shape and bulb shape. This study shows that the hull form optimized by the parametric modification function brings 7.6% reduction in wave making resistance. In addition, for verification and comparison purpose, a direct geometry variation method using a bell-shape modification function is used. It is shown that the optimal hull form generated by the bell-shaped modification function is very similar to that produced by the parametric modification function. However, the total running time of the parametric optimization is six times shorter than that of the bell shape modification method, showing the effectiveness and practicalness from a designer point of view in ship yards.

• 한국산림과학회지
• /
• 제99권5호
• /
• pp.736-743
• /
• 2010

This study examined the ecological attributes of classified forest community by cluster analysis in the mixed forest of Mt. Seokbyung Experimental Forest of Gangwon-Do. The vegetation data were collected in randomly established 51 sample plots (2.04 ha) and analysis adopted the cluster analysis, importance value index, and Shannon's diversity index. Main results were as follows; 1) the study area was classified into 4 clusters (A, B, C and D). 2) The cluster A was dominated by Pinus densiflora with an importance value of 71.6%. The most dominant species in the cluster B and cluster C were Larix leptolepis (57.1%) and Quercus mongolica (40.2%), respectively. Finally, The cluster D was dominated by P. densiflora (30.6%) and Q. mongolica (31.0%) with the mixed forest. 3) In the P. densiflora community (cluster A), distribution of DBH class showed a reverse J-shaped curve. In the L. leptolepis community (cluster B), individuals of dominant species had the bell-shaped distribution. Oak species indicated uniform distribution of DBH class (under 25 cm) in the mixed P. densiflora - Q. mongolica community (cluster D). 4) The species diversity index of the communities in descending order were: Pinus densiflora - Q. mongolica community > Larix leptolepis community > Pinus densiflora community > Quercus mongolica community.

• 오토저널
• /
• 제6권1호
• /
• pp.27-35
• /
• 1984

측정치의 데이터를 그림으로 나타내면 "종을 거꾸로 엎어놓은 모양(Bell Shaped Curve)"의 정 규분포를 이루는 것은 잘 알려진 사실이다. 그러나 수명시험데이터의 경우는 분포의 형이 찌 그러지게 된다. 수명분포는 Weibull분포에 따르므로 Weibull분포에 의한 해석을 하여야 하는 것이 원칙이나 대수정규분포로 근사시켜서 해석을 하여도 실용상 큰 지장은 없다. 수명시험의 경우는 파괴시험이며 장시간의 시험을 요하므로 적은 시료를 시험하는 것이 일반적이다. 특히 자동차공업에 있어서 수명시험은 중요한 품질특성의 하나이며 자동차의 조립에 쓰이는 수만개 부품의 수명을 예측하는 것은 매우 중요한 일이다. 따라서 이 적은 시료에서 얻어낸 데이터를 이용하여 "어떻게 수명의 예측을 올바르게 할 것인가\ulcorner" 하는 문제, 즉 신뢰성의 추정(Reliability Inference)과 로트의 판정이 중요한 문제인 것이다. 이러한 문제의 한 가지 방법으로서 외국에서 이미 널리 활용되고 있는 대수정규확율지를 이용한 수명데이터의 해석 방법을 소개하고자 한다.이터의 해석 방법을 소개하고자 한다.

• 한국염색가공학회지
• /
• 제9권2호
• /
• pp.25-31
• /
• 1997

The extent of binding of acid dye (methyl orange) by crosslinked poly-(4-vinylpyridine) (CHP4VP) has been investigated in aqueous solution containing of inorganic electrolytes such as NaCl and NaSCN. It was found that the first binding constants ($K_{1}$) in the presence of the salts were smaller than those in the absence of the salts and the values of $K_{1}$ showed a bell-shaped curve against temperature. These results are discussed in terms of both the competition binding between the dye and salt anions for the crosslinked polymer and the change of hole size of CHP4VP with the addition of the salts.

• Journal of Plant Biology
• /
• 제5권3호
• /
• pp.1-4
• /
• 1962

A district (Sae-Bong) and 13 district (Sae-Jang Dong) grassland could be divided into four type of Community: Miscanthus-Community, Glyceria-Community, Festuca-Community, and Plantago-Community. Chose 17 or 20 stands from each district A and B and calculated F.I. with the Curtis method, finally vegetational continuum could be recognized while discontinuous boundary line of species distribution could not be recognized. As a rule the distributional curve of species was binominal or bell shaped. It had a distribution pattern peculiar to itself. As to the relationship of cattles' density and vegetation. I found that the tendency of F.I. moving from small to large paralleled that of disturbance-pressure from weak to strong. Found that the more the steepness of environmental factors be controlled by a rule " from large to small", the more F.I. might be controlled by a rule "from small to large" and that pH, soil-moisture-content, loss on ignition was in relation with the steepness. with the steepness.

• 복식
• /
• 제44권
• /
• pp.235-247
• /
• 1999

The influences of Art nouveau and Art Deco are as follow: The first, in the side of silhouette, hourglass style and bell shaped skirt influence on mordern fashion chiefly and S-curve style was mollified. Empire style, hobble style in art deco age are all showed diversely, in these styles especially boyish style give an outstanding trasts to modern fashion. The second, the color of art deco, characterized by pastel in art nouveau's color tone, original color and black and gold was reflected on the textile design and showed diversely in the color fo modern fashion. The third, in the field of textile and pattern, flower and plant which was a motive of art nouveau style, organic curve and geometrical pattern and exotic motive was seperately used with motive in the pattern and design of mordern. Textile of goldish and silver tone, metal stuff, lace embroidery, fur, artifical flower, feather etc. showed up on the many parts of clothing. Like this Art Nouveau and Art style not only had a great effect on the costume but also decorations and formative arts.

• 한국축산식품학회지
• /
• 제20권2호
• /
• pp.101-106
• /
• 2000

유지방구로부터 분리 정제한 lipase의 활성과 안정성에 미치는 pH의 영향을 야자유와 균질유를 기질로 하여 조사하였다. 효소원으로 buttermilk를 사용하였을 경우는 반응온도 $37^{\circ}C$에서 야자유, 균질유 모두 pH 9.5에서 최대 활성을 나타내었으며, 전형적인 종형의 pH의 존곡선을 나타내었다. 그러나 반응온도 $0^{\circ}C$에서는 pH 10.0까지 활성이 증가하였다. 정제 lipase를 사용한 경우는 반응응도 $37^{\circ}C$에서 균질유를 기질로 사용하였을 때 종 모양의 곡선을 나타내었으며, 최대 활성은 pH 9.0에서 나타났다. 반응온도 $0^{\circ}C$에서는 pH 10.0까지 활성이 계속 증가하였다. BSA를 첨가한 야자유를 기질로 사용한 경우는 반응온도 $37^{\circ}C$, $0^{\circ}C$ 모두 최대 활성이 pH 9.5에 나타났으며, pH 10.0에서는 활성이 현저하게 저하하였다. 정제 lipase의 안정성에 미치는 pH의 증가에 따라 현저하게 저하하였다. pH 10.0에서 $37^{\circ}C$로 20분간 효소를 유지하였을 경우 lipase의 활성은 pH 8.5 때의 활성에 비하여 13%로 감소하였다. 그러나, $4^{\circ}C$에서 60분간 효소를 유지하였을 경우는 lipase 활성이 pH 7.5∼10.0의 범위에서 안정하였다.