• Proceedings of the Korean Vacuum Society Conference
• /
• 2006.08a
• /
• pp.172-172
• /
• 2006

• KSTLE International Journal
• /
• v.8 no.1
• /
• pp.1-6
• /
• 2007

Chromatic device was developed using light emitting diodes, optic fibers and photodiodes. Chromatic ratio and total contamination parameters based on transmitted light intensity in Red, Green, and Blue wavelengths were used for oil chemical and particulate contamination assessment. Chromatic ratio criterion was found independent of the particulate contamination of oil; but depended on chemical degradation, being more sensitive for synthetic than mineral hydraulic oil. Total contamination index of the sensor depended on both the chemical degradation and particulate contamination of the oil; being most sensitive in blue wavelength, and least in the red. Test results for synthetic hydraulic oils monitored corroborated with results of other tests such as viscosity, total acid number, elemental optical emission spectroscopy, particulate counts and UV-VIS photospectrometry. Chromatic ratio showed a clearer indication of oil degradation, compared to key monitoring parameters such as total acid number, viscosity and particle counts. The results showed that these parameters are effective criteria for the condition monitoring of synthetic hydraulic oils.

• Korean Journal of Remote Sensing
• /
• v.28 no.1
• /
• pp.129-143
• /
• 2012

This paper demonstrates the effectiveness of advanced spatial modeling techniques for environmental monitoring and impact assessment through a case study of Chernobyl nuclear accident occurred in 1986. Land-cover types changed after the accident are analysed by a post classification comparison method using bi-temporal Landsat TM data acquired in 1986 and 1992 near the accident site. Spatial modeling including various kriging algorithms are also applied to analyze the relationships between Cesium concentrations in soil and thyroid cancer incidence rates in Belarus, which was greatly damaged by the accident. The change detection results clearly showed the decrease of croplands and the increase of abandoned lands, and concrete structures were newly built around the nuclear plant to prevent the spread of radioactive contamination. In Belarus, high Cesium concentrations were observed in southern areas with high thyroid cancer risk estimated by Poisson kriging. Geographically weighted regression, which could account for geographic variations of independent variables including Cesium concentrations and distances from the Chernobyl nuclear power plant, was applied to extract the relationships between the independent variables and the thyroid cancer risk. The estimated risk values showed a correlation coefficient value of 0.98 with respect to the thyroid cancer risk values, which implied that the thyroid cancer risk in Belarus was affected by the accident. In conclusion, it is expected that advanced spatial modeling techniques applied in this study would be useful for environmental impact assessment and public health research.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.04a
• /
• pp.105-108
• /
• 2000

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1993.12a
• /
• pp.1-31
• /
• 1993

General state of research in fundamentals and applied areas of tribology is analysed with taldng account of changes in structure of funding and other aspects of transfer from centmllzed state economy to market one under simultaneous effect of USSR disintegration to independent states. Belarus Tribology Society as a coordinating body is presented. Activities of the major centers of research in friction, wear and lubrication are shown. Recent advances in development of analytical and calculation methods, surface characterization, wear testing and standardization, condition monitoring and tribomaterials are considered.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.06a
• /
• pp.54-61
• /
• 2000

A method and results of classification of 4 types metallic wear debris were presented by using their color features. The color image of wear debris was used (or the initial data, and the color properties of the debris were specified by HSI color model. Particle was characterized by a set of statistical features derived from the distribution of HSI color model components. The initial feature set was optimized by a principal component analysis, and multidimensional scaling procedure was used for the definition of classification plane. It was found that five features, which include mean values of H and S, median S, skewness of distribution of S and I, allow to distinguish copper based alloys, red and dark iron oxides and steel particles. In this work, a method of probabilistic decision-making of class label assignment was proposed, which was based on the analysis of debris-coordinates distribution in the classification plane. The obtained results demonstrated a good availability for the automated wear particle analysis.

• Tribology and Lubricants
• /
• v.24 no.1
• /
• pp.7-13
• /
• 2008

In this work, a simple and low cost sensor technique is proposed to test oil color in real time using in-line sensor. It is presented to use a ratio of intensity in red wavelength range to intensities of green and blue wavelength ranges (defined as a 'chromatic ratio') in order to estimate the oil color change. The proposed sensor technique is realized by irradiating a white LED as light source and a RGB color sensor as photoreceiver, and the chromatic ratio of various types of used oils are measured. The results show that chromatic ratio generally reflects chemical deterioration of oil, including oil oxidation and thermal degradation. It is concluded that the proposed sensor could be used for an effective oil monitoring technology.

• Tribology and Lubricants
• /
• v.19 no.6
• /
• pp.329-334
• /
• 2003

The antiwear properties of amphiphilic monolayers and composite multilayer on silicon surface were investigated using micro­tribometer and Auger Electron Spectroscopy. Langmuir­Blodgett (LB) monolayers from behenic acid, 2,4­heneicosanedione(HD) and its lopper complex((HD)$_2$Cu) were fabricated on silicon surface and the composite multilayer of 5­bilayer of (HD)$_2$Cu was fabricated on the surface of octadecyltrichlorosilane (OTS) self­assembled monolayer (SAM). We observed that LB monolayers and the composite multilayer exhibited a steady and excellent friction response when compared with the OTS SAM. These LB mono and multilayer also showed much higher wear­resistance than the OTS SAM.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.211-214
• /
• 2003

The tribological properties of amphiphilic monolayers and composite multilayer on silicon surface were investigated using micro-tribometer and Auger Electron Spectroscopy. Langmuir-Blodgett (LB) monolayers from behenic acid. 2.4-heneicosanedione(HD) and its copper complex((HD)$_2$Cu) were fabricated on silicon surface and the composite multilayer of 5-bilayer of (HD)$_2$Cu was fabricated on the surface of octadecyltrichlorsilane (OTS) self-assembled monolayer(SAM). We observed that LB monolayers and the composite multilayer exhibited a steady and excellent friction response when compared with the OTS SAM. These LB mono and multilayer also showed much higher wear-resistance than the OTS SAM.

• Tribology and Lubricants
• /
• v.26 no.2
• /
• pp.97-104
• /
• 2010

A new magnetoelastic technique of oil viscosity measurement, where the oil viscosity is estimated by frequency shift of natural oscillations of magnetoelastic ribbon, is implemented in this study. Laboratory tests of the detector prototype are performed for measurement of viscosity of base synthetic and mineral oils. It was found that measurement accuracy was better when damping factor was estimated in comparison with accuracy of frequency of damped oscillations. Thus the oil viscosity was calibrated as a function of number of pulses of the damped oscillations of magnetoelastic ribbon. Result generally showed that developed detector is promising for in line oil viscosity measurement in wide viscosity range from 10 cSt up to 600 cSt, while the viscosity measurement was relatively instable when the viscosity of test oil was over 400 cSt.