• 한국화재소방학회논문지
• /
• 제3권2호
• /
• pp.11-19
• /
• 1989

In this study, the independent variables are the floor plan configulation. The dependent variables are the occupant's egress behavior, especially spatial movement pattern, and life - safety performance of building. Fire events were simulated on single story of office building. Simulation run for allowable secaping thime(180 seconds) arbitrarily selected, and involved 48 occupants. The major findings Pre as follows. 1) Computer simulation model suggested in this study can be used as the Preoccupancy evaluation method of the life-safety performance for architectural design based on prediction of occupants' egress behavior in the levels of validity and sensitivity, 2) Sucess or failure in occupants' escape is determined by decreasing walking speed caused by jamming at exits or over crowded corridor, and increasing route length caused by running about in confusion at each subdivision and corridor. 3) In floor plan configuration which safe areas located at the extreme ends of the corridor, cellular floor planning have to be avoided preventing jamming and running about in confusion at overcrowded corridor.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.219-224
• /
• 2009

In this study, the characteristics of pullout behavior of Pressurized light-weight steel Anchor was investigated through centrifuge model tests considering pull-out angle $0^{\circ}$ with changing undrained shearstrength(0~1, 2~4, 5~7kPa) of clay. According to the results of tests, the yield pullout load of clay ground was gradually increased up to 30% as undrained shear strength was increased. Therefore, it was known that the yield pullout load was affected by increasing the undrained shear strength, in addition, the pattern of behavior was not changed.

• 정보처리학회논문지B
• /
• 제11B권3호
• /
• pp.281-288
• /
• 2004

본 논문은 외부 자극에 대한 생물 행동의 복잡하고 다양한 특징들을 추출하고 분석하기 위한 방법을 제안한다. 이를 위해 물 속 생물인 깔따구의 행동궤적으로부터 얻어 낸 속도 벡터의 위상영상에 적응적이고 수리적인 방법인 에너지 최소화 모델을 적용한다. 즉, 다이아지논이라는 약물이 처리되기 전과 후의 깔따구의 행동궤적의 특징을 위상영상으로부터 찾아내어 행동 패턴을 분류하고 이 약물에 대한 깔따구의 적응적 행동 특징을 추출하는 것이다. 특징추출을 위해 도입한 방법은 T. Chan과 L. Vese에 의해 제안된 개선 Active Contour 모델에 근거한 것으로 Active Contour를 진화시키는 과정에서 생성되는 에너지함수 값의 변화를 이용한 것이다. Active Contour 모델이란 주어진 영상에 놓인 커브를 그 커브에 의해 분할된 부분영상들의 에너지 값들의 합을 최소화하는 방향으로 변화하게 함으로써 영상 내 객체의 경계를 찾는 영상분할 방법이다. 깔따구의 행동궤적 데이터는 CCD 카메라를 통해 0.25초 간격으로 약물을 처리하기 전과 후 4일 간을 관찰하여 획득하고, 이 행동궤적 데이터에서 행동의 특징 요소가 되는 속도벡터 성분을 15-20분 간격으로 추출하여 위상영상을 만든다. 그리고 이 위상영상에 Active Contour를 적용함으로써 시간에 따라 감소하는 에너지 함수 값의 그래프에서 구해진 기울기 변화에 대한 수리적 계산과 분석을 통해 깔따구 행동궤적의 특징을 찾고 행동 패턴을 분류한다. 또한, 에너지 최소화 모델은 약물 처리된 깔따구의 반응적인 행동이 이에 적응하고 있음을 효과적으로 보여준다.

• 한국터널지하공간학회 논문집
• /
• 제5권4호
• /
• pp.313-322
• /
• 2003

본 연구는 도심지터널 시공시 막장진행에 따라 다양하게 계측된 현장의 계측치 분석을 통하여 막장 진행에 따른 터널 주변지반의 거동 및 인접구조물의 3차원 거동을 상호 규명하였으며, 일반적으로 터널설계시 적용되는 Mohr-Coulomb 모델 및 막강관찰 자료를 바탕으로 한 Hoek-Brown 현장암반모델을 적용한 3차원 유한요소해석을 실시하여 각각의 결과를 비교 검토하여 이들 지반 및 구조물 거동을 규명하였다. 막장 진행에 따른 침하 양상은 greenfield 상태에서의 거동과는 차이를 보이고 있으며 구조물의 위치와 강성 그리고 하중에 큰 영향을 받는 것으로 나타났다.

• Earthquakes and Structures
• /
• 제9권4호
• /
• pp.699-718
• /
• 2015

The effect of reinforcing concrete members with high strength steel bars with yield strength up to 600 MPa on the overall seismic behavior of concrete moment frames was studied experimentally and numerically. Three geometrically identical plane frame models with two bays and two stories, where one frame model was reinforced with hot rolled bars (HRB) with a nominal yield strength of 335 MPa and the other two by high strength steel bars with a nominal yield strength of 600 MPa, were tested under simulated earthquake action considering different axial load ratios to investigate the hysteretic behavior, ductility, strength and stiffness degradation, energy dissipation and plastic deformation characteristics. Test results indicate that utilizing high strength reinforcement can improve the structural resilience, reduce residual deformation and achieve favorable distribution pattern of plastic hinges on beams and columns. The frame models reinforced with normal and high strength steel bars have comparable overall deformation capacity. Compared with the frame model subjected to a low axial load ratio, the ones under a higher axial load ratio exhibit more plump hysteretic loops. The proved reliable finite element analysis software DIANA was used for the numerical simulation of the tests. The analytical results agree well with the experimental results.

• Advances in aircraft and spacecraft science
• /
• 제4권4호
• /
• pp.449-465
• /
• 2017

The aim of the present work is to present a computational study of the non-linear aero-elastic behavior of a multi-layered Thermal Protection System (TPS). The severity of atmospheric re-entry conditions is due to the combination of high temperatures, high pressures and high velocities, and thus the aero-elastic behavior of flexible structures can be difficult to assess. In order to validate the specific computational model and the overall strategy for structural and aerodynamics analyses of flexible structures, the simplified TPS sample tested in the 8' High Temperature Tunnel (HTT) at NASA LaRC has been selected as a baseline for the validation of the present work. The von $K{\acute{a}}rm{\acute{a}}n^{\prime}s$ three dimensional large deflection theory for the structure and a hybrid Raleigh-Ritz-Galerkin approach, combined with the first order Piston Theory to describe the aerodynamic flow, have been used to derive the equations of motion. The paper shows that a good description of the physical behavior of the fabric is possible with the proposed approach. The model is further applied to investigate structural and aero-elastic influence of the number of the layers and the stitching pattern.

• 소성∙가공
• /
• 제18권3호
• /
• pp.268-273
• /
• 2009

Ultraviolet nanoimprint lithography (UV-NIL), which is performed at a low pressure and at room temperature, is known as a low cost method for the fabrication of nano-scale patterns. In the patterning process, maintaining the uniformity of the residual layer is critical as the pattern transfer of features to the substrate must include the timed etch of the residual layer prior to the etching of the transfer layer. In pursuit of a thin and uniform residual layer thickness, the initial volume and the position of each droplet both need to be optimized. However, the monomer mixtures of resin had a tendency to evaporate. The evaporation rate depends on not only time, but also the initial volume of the monomer droplet. In order to decide the initial volume of each droplet, the accurate prediction of evaporation behavior is required. In this study, the theoretical model of the evaporation behavior of resin droplets was developed and compared with the available experimental data in the literature. It is confirmed that the evaporation rate of a droplet is not proportional to the area of its free surface, but to the length of its contact line. Finally, the parameter of the developed theoretical model was calculated by curve fitting to decide the initial volume of resin droplets.

• Macromolecular Research
• /
• 제11권4호
• /
• pp.283-290
• /
• 2003

Organic drugs including aspirin, omeprazole, and naproxen with three different levels of octanol/water partition coefficient were examined for their release behavior from the amphiphilic PCL-b-PEO-b-PCL (PCEC) matrix. Scanning electron micrograph (SEM) of PCEC illustrated a well defined two-phase morphology consisted of dispersed poly(ethylene oxide) (PEO) domain and continuous polycaprolactone (PCL) phase. Differential scanning calorimetry (DSC) and X-ray diffractometry (XRD) experiments veri tied that three model drugs are dissolved as a molecular dispersion in PCEC matrix. The release of hydrophilic aspirin closely followed the water absorption profile of the matrix indicating that its major fraction is present in PEO domain. However, substantial amount of aspirin present in less hydrophilic region displayed discontinuous biphasic release pattern. In the case of omeprazole with intermediate hydrophobicity consistent release behavior was observed for a period of 24 hrs after the rapid liberation of ca. 10% of the drug presumably partitioned in PEO phase. It was ascribed to the fact that the progressive hydration of PCEC matrix gradually increased the chance of drug/water exposure to compensate the exhaustion of device. Naproxen with the highest octanol/water distribution coefficient among three model drugs exhibited a limited release of 35% for 24 hrs. Finally, hydroxypropyl methylcellulose phthalate (HPMCP)/PCEC blend matrix demonstrated an accelerated and quantitative release of hydrophobic naproxen by generating high porosity and thereby expanding polymer/water interface.

• Journal of the Korean Data and Information Science Society
• /
• 제18권2호
• /
• pp.535-541
• /
• 2007

The Non-homogeneous Poisson process is probably the most popular model since it can model systems that are deteriorating or improving. The renewal process is a model that is often used to describe the random occurrence of events in time. But both these models are based on too restrictive assumptions on the effect of the repair action. The Modulated Power Law Process is a suitable model for describing the failure pattern of repairable systems when both renewal-type behavior and time trend are present. In this paper we propose maximum likelihood estimation of the next failure time after the system has experienced some failures, that is, Mean Time Between Failure for the MPLP model.

• 한국지능시스템학회논문지
• /
• 제20권3호
• /
• pp.422-427
• /
• 2010

2004년 이후 정보기술의 성장과 더불어 게임 서비스에 대한 피해 사례가 해 마다 빠르게 증가하고 있는 실정이다. 특히 게임 봇(자동사냥 프로그램)에 대한 피해규모가 가장 크게 조사되고 있으며 이를 방지하기 위한 연구도 활발히 진행되고 있다. 게임 봇은 사용자가 입력하는 키보드나 마우스의 움직임을 대신해 자동으로 게임을 수행하는 프로그램으로 어떠한 사용자의 조작 없이도 게임 속에서의 이득 활동을 무한정 행할 수 있다. 이와 같은 행동은 일반적인 사용자에게 상대적인 불쾌감을 줄 뿐만 아니라 게임의 수명을 단축시키는 등 게임 회사 및 사용자에게 큰 피해를 발생시키고 있어 이를 방지하기 위한 방법이 주목 되고 있다. 기존의 게임 봇 검출 연구들은 단순이 사용자 개인 PC에 설치되어 동작중인 프로그램을 감시하기 때문에 게임 봇 사용자의 조작에 의해 쉽게 피해갈수 있는 단점을 가지고 있다. 따라서 본 논문에서는 게임 서버측면에서 사람과 게임 봇의 행동을 비교하여 게임 봇 사용자들이 조작이나 회피가 힘든 게임 봇 검출 방법을 제안한다. 제안 방법으로는 게임 봇과 사람의 행동 패턴 차이 모델을 정의하고 나이브 베이지안 분류기를 사용하여 게임 봇을 검출한다.