• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.3
• /
• pp.267-275
• /
• 2012

In this study, crack growth in a center-cracked plate is predicted under mode I variable amplitude loading, and the result is validated by experiment. Huang's model is employed to describe crack growth with acceleration and retardation due to the variable loading effect. Experiment is conducted with Al6016-T6 plate, in which the load is applied, and crack length is measured periodically. Particle Filter algorithm, which is based on the Bayesian approach, is used to estimate model parameters from the experimental data, and predict the crack growth of the future in the probabilistic way. The prediction is validated by the run-to-failure results, from which it is observed that the method predicts well the unique behavior of crack retardation and the more data are used, the closer prediction we get to the actual run-to-failure data.

• The KIPS Transactions:PartA
• /
• v.16A no.1
• /
• pp.43-54
• /
• 2009

With the emergence of ubiquitous computing era, it has become increasingly important for a middleware which takes full advantage of HCI factors to support user-centric services. Many kinds of studies on HCI-friendly middleware for supporting user-centric services have been performed. However, previous studies have problems in supporting HCI factors, which are needed for user-centric services. In this paper, we present an agent-based intelligent middleware, which is called AIM, that provides user-centric services in ubiquitous HCI environments. We describe the middleware requirements for user-centric services by analyzing various HCI-friendly middleware and design AIM middleware which effectively supports various HCI factors such as context information management, pattern inference of user's behavior, and dynamic agent generation, etc. We introduce service scenarios based on the user's modalities in smart spaces. Finally, prototype implementation is illustrated as a manifestation of the benefits of the introduced infrastructure.

• KNOM Review
• /
• v.22 no.1
• /
• pp.42-51
• /
• 2019

Recently, the amount of internet traffic is increasing due to the increase in speed and capacity of the network environment, and protocol data is increasing due to mobile, IoT, application, and malicious behavior. Most of these private protocols are unknown in structure. For efficient network management and security, analysis of the structure of private protocols must be performed. Many protocol reverse engineering methodologies have been proposed for this purpose, but there are disadvantages to applying them. In this paper, we propose a methodology for inferring a detailed protocol structure based on network trace analysis by hierarchically combining CSP (Contiguous Sequential Pattern) and SP (Sequential Pattern) Algorithm. The proposed methodology is designed and implemented in a way that improves the preceeding study, A²PRE, We describe performance index for comparing methodologies and demonstrate the superiority of the proposed methodology through the example of HTTP, DNS protocol.

• Geomechanics and Engineering
• /
• v.31 no.4
• /
• pp.339-352
• /
• 2022

Studying slope stability is an important branch of civil engineering. In this way, engineers have employed machine learning models, due to their high efficiency in complex calculations. This paper examines the robustness of various novel optimization schemes, namely equilibrium optimizer (EO), Harris hawks optimization (HHO), water cycle algorithm (WCA), biogeography-based optimization (BBO), dragonfly algorithm (DA), grey wolf optimization (GWO), and teaching learning-based optimization (TLBO) for enhancing the performance of adaptive neuro-fuzzy inference system (ANFIS) in slope stability prediction. The hybrid models estimate the factor of safety (F_S) of a cohesive soil-footing system. The role of these algorithms lies in finding the optimal parameters of the membership function in the fuzzy system. By examining the convergence proceeding of the proposed hybrids, the best population sizes are selected, and the corresponding results are compared to the typical ANFIS. Accuracy assessments via root mean square error, mean absolute error, mean absolute percentage error, and Pearson correlation coefficient showed that all models can reliably understand and reproduce the F_S behavior. Moreover, applying the WCA, EO, GWO, and TLBO resulted in reducing both learning and prediction error of the ANFIS. Also, an efficiency comparison demonstrated the WCA-ANFIS as the most accurate hybrid, while the GWO-ANFIS was the fastest promising model. Overall, the findings of this research professed the suitability of improved intelligent models for practical slope stability evaluations.

• Korean Journal of Culture and Social Issue
• /
• v.9 no.1
• /
• pp.67-79
• /
• 2003

Why, in general, don't Korean people follow the law? Possible one of the answers to this question is based on lay people's emotional evaluation to the law in which common people's evaluation to the guilty according to their private logics comparing to public logics of facts and sentence of illegal behavior. Futhermore, in psychological field, there have been some researches concerning on differences in morality such as moral judgement and evaluation including moral inference among cultures. Therefore, the reason why Korean people tend to be not law observance and law break is that Korean people are not immoral such as telling a lie and not keeping promises, but rather they have a tendency of appling their private and personal logics based on Cheong(interpersonal affection) relationships and logics to public and legal affairs.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.5 s.305
• /
• pp.27-34
• /
• 2005

Ventricular fibrillation(VF) is generally caused by chaotic behavior of electrical propagation in heart and may result in sudden cardiac death. In this study, we proposed a ventricular fibrillation detection algorithm based on support vector machine classifier, which could offer benefits to reduce the teaming costs as well as good classification performance. Before the extraction of input features, raw ECG signal was applied to preprocessing procedures, as like wavelet transform based bandpass filtering, R peak detection and segment assignment for feature extraction. We selected input features which of some are related to the rhythm information and of others are related to wavelet coefficients that could describe the morphology of ventricular fibrillation well. Parameters for SVM classifier, C and ${\alpha}$, were chosen as 10 and 1 respectively by trial and error experiments. Each average performance for normal sinus rhythm ventricular tachycardia and VF, was 98.39%, 96.92% and 99.88%. And, when the VF detection performance of SVM classifier was compared to that of multi-layer perceptron and fuzzy inference methods, it showed similar or higher values. Consequently, we could find that the proposed input features and SVM classifier would one of the most useful algorithm for VF detection.

• Steel and Composite Structures
• /
• v.34 no.5
• /
• pp.743-767
• /
• 2020

Due to the impressive flexural performance, enhanced compressive strength and more constrained crack propagation, Fibre-reinforced concrete (FRC) have been widely employed in the construction application. Majority of experimental studies have focused on the seismic behavior of FRC columns. Based on the valid experimental data obtained from the previous studies, the current study has evaluated the seismic response and compressive strength of FRC rectangular columns while following hybrid metaheuristic techniques. Due to the non-linearity of seismic data, Adaptive neuro-fuzzy inference system (ANFIS) has been incorporated with metaheuristic algorithms. 317 different datasets from FRC column tests has been applied as one database in order to determine the most influential factor on the ultimate strengths of FRC rectangular columns subjected to the simulated seismic loading. ANFIS has been used with the incorporation of Particle Swarm Optimization (PSO) and Genetic algorithm (GA). For the analysis of the attained results, Extreme learning machine (ELM) as an authentic prediction method has been concurrently used. The variable selection procedure is to choose the most dominant parameters affecting the ultimate strengths of FRC rectangular columns subjected to simulated seismic loading. Accordingly, the results have shown that ANFIS-PSO has successfully predicted the seismic lateral load with R² = 0.857 and 0.902 for the test and train phase, respectively, nominated as the lateral load prediction estimator. On the other hand, in case of compressive strength prediction, ELM is to predict the compressive strength with R² = 0.657 and 0.862 for test and train phase, respectively. The results have shown that the seismic lateral force trend is more predictable than the compressive strength of FRC rectangular columns, in which the best results belong to the lateral force prediction. Compressive strength prediction has illustrated a significant deviation above 40 Mpa which could be related to the considerable non-linearity and possible empirical shortcomings. Finally, employing ANFIS-GA and ANFIS-PSO techniques to evaluate the seismic response of FRC are a promising reliable approach to be replaced for high cost and time-consuming experimental tests.

• The KIPS Transactions:PartB
• /
• v.8B no.5
• /
• pp.429-440
• /
• 2001

To achieve a computer tutor framework with high learning effects as well as practicality, the goal of this research has been set to developing an intelligent tutor for problem-solving in mathematics domain. The maine feature of the CyberTutor, a computer tutor developed in this research, is the facilitation of a learning environment interacting in accordance with the learners differing inferential capabilities and needs. The pedagogical information, the driving force of such an interactive learning, comprises of tutoring strategies used commonly in various domains such as phvsics and mathematics, in which the main contents of learning is the comprehension and the application of principles. These tutoring strategies are those of testing learners hypotheses test, providing hints, and generating explanations. We illustrate the feasibility and the behavior of our propose framework with a sample problem-solving learning in geometry. The proposed tutorial framework is an advancement from previous works in several aspects. Firstly, it is more practical since it supports handing of a wide range of problem types, including not only proof types but also finding-unkown tpes. Secondly, it is aimed at facilitating a personal tutor environment by adapting to learners of varying capabilities. Finally, learning effects are maximized by its tutorial dialogues which are derived from real-time problem-solving inference instead of from built-in procedures.

• Journal of the Korea Society for Simulation
• /
• v.23 no.2
• /
• pp.73-84
• /
• 2014

Recently, researches on the application of IT technology to various fields including traditional industries are becoming more popular. One challenge in the field of education is to understand the way how technology may support learning, and research on self-directed learning has been accelerated by integrating education and IT technology. The process of self-directed learning in e-learning applications such as Car Maintenance Training is very difficult and complicated. Previous studies on car maintenance training applications provided simple training scenarios with predetermined action sequences. To incorporate self-directed learning in car maintenance training, however, trainees must be able to perform various maintenance operations himself and experience various situations. To provide such functionality, it is necessary to obtain an accurate response for various operations of trainees, but it requires complicated calculations with respect to varieties in the electrical and mechanical processes of a car. In this paper, we develop a logic simulation agent using JESS inference engine in which self-directed learning is achieved by capturing the behavior of trainees and simulating car operations without complicated physical simulations in car maintenance training.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.9 no.2 s.42
• /
• pp.37-46
• /
• 2005

To date, many viable smart base isolation systems have been proposed and investigated. In this study, a novel friction pendulum system (FPS) and an MR damper are employed as the isolator and supplemental damping device, respectively, of the smart base isolation system. A fuzzy logic controller (FLC) is used to modulate the MR damper because the FLC has an inherent robustness and ability to handle non linearities and uncertainties. A genetic algorithm (GA) is used for optimization of the FLC. The main purpose of employing a GA is to determine appropriate fuzzy control rules as well to adjust parameters of the membership functions. To this end, a GA with a local improvement mechanism is applied. This method is efficient in improving local portions of chromosomes. Neuro fuzzy models are used to represent dynamic behavior of the MR damper and FPS. Effectiveness of the proposed method for optimal design of the FLC is judged based on computed responses to several historical earthquakes. It has been shown that the proposed method can find optimal fuzzy rules and the GA optimized FLC outperforms not only a passive control strategy but also a human designed FLC and a conventional semi active control algorithm.