• 플랜트 저널
• /
• 제14권2호
• /
• pp.33-38
• /
• 2018

본 연구에서는 순환유동층보일러의 베드가 과열되어 층 물질의 소결이 발생하고 노 내 유동물질에 의해 보일러튜브가 마모 되는 것을 최소화하기 위하여, 노 하부 베드의 층 물질량 조정을 통한 베드 온도 변화를 실험적으로 연구하였다. 실험은 300MW급 순환유동층보일러인 여수화력 2호기를 대상으로 하였으며 터빈출력, 석탄소비량, 공기량 등을 고정한 상태에서 층 물질 양을 감소시켜 베드 압력을 설계값 4.5KPa에서 2.5KPa까지 감소시켰다. 결론적으로 층 물질 양을 적정하게 줄이면 베드 온도가 저하 되나, 지속적으로 저하되지 않는 것을 확인 하였으며, 베드 압력 3.0KPa, 즉 베드 물질량 110 톤을 변곡점으로 하여 베드 온도는 상승하기 시작하였다. 층 물질량이 충분히 많은 상태에서, 층 물질량이 감소되면 베드 온도는 저하되며, 층 물질량이 적정량 보다 적으면 노 내 유동물질의 순환량 감소로 베드 온도는 상승함을 알 수 있었다. 또한 유동층보일러에서 베드 온도 변화는 단순히 층 물질의 양 뿐만 아니라, 보일러 용량 및 연료의 성상 등에 따라 변화 추이가 매우 다양하게 나타난다는 것을 알 수 있었다.

• 수산해양교육연구
• /
• 제27권4호
• /
• pp.1021-1030
• /
• 2015

For the water quality improvement in the ocean outfall area of sewage treatment plant, this study tried to control the water quality of outfall area using the biofilter method through seaweeds, a way of ecological engineering treatment that is applicable in the marine ecosystem. Therefore, this research made an attempt the main factors necessary for creating seaweed bed to improve water quality in the outfall area of sewage treatment plant, and the results are as follows. In the case of making the seaweed bed in the ocean outfall area of sewage treatment plant, Habitat Suitability Index of Ecklonia cava per all survey points, considered physical and physico-chemical factors in 5~10 meters below sea level, was 50~93% (average 80%), so this seaweed, Ecklonia cava, was suitable for making the seaweed bed.

• Journal of Plant Biology
• /
• 제13권4호
• /
• pp.23-31
• /
• 1970

The rice variety, Kwanok, was reared in the water and land beds and transplanted to the reclaimed soil area, having an average salt concentration of 0.39%. Two levels of the moderate and late season cultures with 4 treatments were used. The K and Si contents of the stem part of land bed seedlings were somewhat smaller, but total carbohydrate remarkably larger, the C/N ratio was accordingly greater than water bed seedlings. The rooting ability of land bed seedlings was vigorous markedly in culture solutions, to which added various concentrations of NaCl, The rooting ability of each seedling water not much declined in theculturing solution of up to 9.4mmhos/cm, (0.6%) of salt concentration, but it was drastically declined in the salt concentration over that. It seemed that the critical salt concentration for the rooting rice plant. The land bed seedlings in each salty condition markedly decreased compared with the water bed seeldings in transpiration rate and it showed a stronger drought resistance and contained a large amount of chlorophyll at transplanting stage, and also showed higher stability of chlorophyll at rooting stage in the salt treatment. The number of panicles, panicle weight, number of grains per panicle and ratio of matured grains of the rice plant grown by the land bed seedlings were much greater and 1,000 grain weight was less than from water bed seedlings. The cultural practices with the land bed seedlings increased the rough rice yields by 15% and 11%, respectively, compared with the yields of the moderate and late season cultures by water bed seedlings.

• Nuclear Engineering and Technology
• /
• 제39권2호
• /
• pp.95-102
• /
• 2007

The conceptual design of the MIT modular pebble bed reactor is described. This reactor plant is a 250 Mwth, 120 Mwe indirect cycle plant that is designed to be deployed in the near term using demonstrated helium system components. The primary system is a conventional pebble bed reactor with a dynamic central column with an outlet temperature of 900 C providing helium to an intermediate helium to helium heat exchanger (IHX). The outlet of the IHX is input to a three shaft horizontal Brayton Cycle power conversion system. The design constraint used in sizing the plant is based on a factory modularity principle which allows the plant to be assembled 'Lego' style instead of constructed piece by piece. This principle employs space frames which contain the power conversion system that permits the Lego-like modules to be shipped by truck or train to sites. This paper also describes the research that has been conducted at MIT since 1998 on fuel modeling, silver leakage from coated fuel particles, dynamic simulation, MCNP reactor physics modeling and air ingress analysis.

• Plant Resources
• /
• 제5권3호
• /
• pp.187-191
• /
• 2002

This experiment was conducted to investigate the effects of turf grass growth to seedling rates and bed soil types. The results of this experiment were summarized as follows; the more increasing the seedling rates, the plant height and leaf length were longer, but the number of leaf and number of branch were fewer. Incase of transplanting of turf grass seedling by rice transplanting machine, it might be considered that the proper alternative bed soil was sandy loam soil with regarding to the economic aspects. The maximum seedling rate of turf grass in the seedling tray for rice was 1,000 of seedling amount due to the nutrient competition with intensive seedling. As the results indicated, it might be recommended that the proper alternative bed soil was sandy loam soil with 1,000 of seedling rates in case of transplanting of turf grass seedling by rice transplanting machine.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2002년도 심포지엄
• /
• pp.31-36
• /
• 2002

This experiment was conducted to investigate the effects of turf grass growth to seedling rates and bed soil types. The results of this experiment were summarized as follows; the more increasing the seedling rates, the plant height and leaf length were longer, but the number of leaf and number of branch were fewer. In case of transplanting of turf grass seedling by rice transplanting machine, it might be considered that the proper alternative bed soil was sandy loam soil with regarding to the economic aspects. The maximum seedling rate of turf grass in the seedling tray for rice was 1,000 of seedling amount due to the nutrient competition with intensive seedling. As the results indicated, it might be recommended that the proper alternative bed soil was sandy loam soil with 1,000 of seedling rates in case of transplanting of turf grass seedling by rice transplanting machine.

• Journal of Plant Biology
• /
• 제13권4호
• /
• pp.13-22
• /
• 1970

The rice variety, Kwanok, was reared in the water, land and salt seed beds and transplanted to the reclaimed soil area having an average of 0.48% salt content (0.67% at the end of April). The plant height of land bel seedlings at transplanting stage was short but the dry-weight/plant-height ratio was large and the rooting ability was vigorous remarkably after transplantation in the salty area. The central cylinder, vessels, sclerenchyma, endodermis and other mechanical tissues of the root of land bed seedlings were well developed while the size of cortical cell layers were small. The cytoplasm of the cortical parenchyma at the root tips seemed to be most abundant in the land bed seedlings. The formation of the aerial cavity in the cortex of primary root was rapid and it seemed that the developmental mechanism of the aerial cavity in the rice plant roots was related to the development of the lateral roots.

• 플랜트 저널
• /
• 제8권1호
• /
• pp.73-80
• /
• 2012

The structure and combustion characteristics, and the economic feasibility of the circulating fluidized bed combustion(CFBC) boiler using low grade coal were introduced. The economic feasibility is evaluated by comparing a 500 MW CFBC boiler power plant using low grade coal and a pulverized combustion boiler power plant with high grade coal. As the result of the evaluation, the pulverized coal combustion boiler power plant has an internal rate of return of 12.95%, 1,395.9 billion Korean won of net present value, and 6.26 years of payback period. On the other hand, CFBC boiler power plant has an internal rate of return of 13.54%, 1,704.3 billion Korean won of net present value, and 6.02 years payback period. Therefore, the CFBC boiler power plant has better feasibility in all aspects, as 0.59% higher of internal rate of return, 308.4 billion Korean won of higher net present value and 0.24 year of shorter payback period.

• 한국환경생태학회지
• /
• 제22권1호
• /
• pp.43-58
• /
• 2008

하천식물의 자연환경조건을 규명하기 위하여 국내 중소규모의 10개 하천(한강수계의 문산천, 곡릉천, 낙동강 수계의 미천, 쌍계천, 남천, 북한강 수계의 가평천, 조종천, 남한강 수계의 청미천, 양화천, 복하천)을 선별한 다음에 각 하천의 전 유로연장에서 가장 자연성이 높은 구간 1km를 중점조사구로 결정하였다. 그리고 그 구간에 대하여 $2004\sim2007$년 여름에 식물조사를 belt transect 방법으로 실시하였다. 그 결과 총 296종이 출현하였는데, 그 중에서 출현빈도가 높은 121종과 대상지의 환경인자(저수로 물로 부터의 거리, 하상재료의 크기, 사주의 개수, 대상지의 고도, 하상경사, 저수로의 폭, 하천수질측정값)간의 RDA (Redundancy analysis) 및 피어슨의 상관성 분석을 실시하였다. 그 결과 대입된 식물종들은 대상지의 고도, 하상경사, 사주의 개수의 인자와는 유의성이 없었으나, 하상재료의 크기, 저수로의 폭, 전기전도도와 인산염인$(PO_4-P)$의 농도와는 상관성이 “매우 높은$\sim$보통”으로 분석되었다. 그리고 이 식물들은 현재의 그들의 수환경 조건을 그대로 반영하고 있기 때문에 분석방법의 신뢰성에 큰 무리가 없으나, 사례의 다양성 부족으로 다른 사례하천으로의 확대해석은 어려울 것이다. 그러나 본 자료는 앞으로 하천특성에 따른 식물연구나 하천식물 선정을 위한 기초 자료로는 이용할 수 있을 것이다.

• 한국수소및신에너지학회논문집
• /
• 제24권2호
• /
• pp.128-135
• /
• 2013

The nuclear fuel cycle plant is composed of various subsystems such as a fuel storage and delivery system (SDS), a tokamak exhaust processing system, a hydrogen isotope separation system, and a tritium plant analytical system. Korea is sharing in the construction of the International Thermonuclear Experimental Reactor (ITER) fuel cycle plant with the EU, Japan, and the US, and is responsible for the development and supply of the SDS. Hydrogen isotopes are the main fuel for nuclear fusion reactors. Metal hydrides offer a safe and convenient method for hydrogen isotope storage. The storage of hydrogen isotopes is carried out by absorption and desorption in a metal hydride bed. These reactions require heat removal and supply respectively. Accordingly, the rapid storage and delivery of hydrogen isotopes are enabled by a rapid cooling and heating of the metal hydride bed. In this study, we designed and manufactured a vertical-type hydrogen isotope storage bed, which is used to enhance the cooling performance. We present the experimental details of the cooling performances of the bed using various cooling parameters. We also present the modeling results to estimate the heat transport phenomena. We compared the cooling performance of the bed by testing different cooling modes, such as an isolation mode, a natural convection mode, and an outer jacket helium circulation mode. We found that helium circulation mode is the most effective which was confirmed in our model calculations. Thus we can expect a more efficient bed design by employing a forced helium circulation method for new beds.