• Plant Journal
• /
• v.14 no.2
• /
• pp.33-38
• /
• 2018

The CFB boilers technology is facing a number of challenges. Among them, boiler tube erosion, sintering by bed inventory overheating and high self consumed service power are major ones. This study was conducted to obtain allowable bed inventory with the Yeosu Power Plant, a 300 MW class CFB boiler. For the test, bed pressure was reduced from design pressure of 4.5 KPa to 2.5 KPa by reducing bed inventory, at fixed turbine output, coal consumption rate and air flow. Consequently, reducing the lower bed inventory is effective to decrease bed temperature but excessive reducing might increase bed temperature due to lack of circulating fluidized materials. Also, in case of the Yeosu Plant boiler using subbituminous coal as its primary fuel, its bed temperature change is highly affected by not only the amount of bed inventory, but also the boiler capacity and coal contents.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.4
• /
• pp.1021-1030
• /
• 2015

For the water quality improvement in the ocean outfall area of sewage treatment plant, this study tried to control the water quality of outfall area using the biofilter method through seaweeds, a way of ecological engineering treatment that is applicable in the marine ecosystem. Therefore, this research made an attempt the main factors necessary for creating seaweed bed to improve water quality in the outfall area of sewage treatment plant, and the results are as follows. In the case of making the seaweed bed in the ocean outfall area of sewage treatment plant, Habitat Suitability Index of Ecklonia cava per all survey points, considered physical and physico-chemical factors in 5~10 meters below sea level, was 50~93% (average 80%), so this seaweed, Ecklonia cava, was suitable for making the seaweed bed.

• Journal of Plant Biology
• /
• v.13 no.4
• /
• pp.23-31
• /
• 1970

The rice variety, Kwanok, was reared in the water and land beds and transplanted to the reclaimed soil area, having an average salt concentration of 0.39%. Two levels of the moderate and late season cultures with 4 treatments were used. The K and Si contents of the stem part of land bed seedlings were somewhat smaller, but total carbohydrate remarkably larger, the C/N ratio was accordingly greater than water bed seedlings. The rooting ability of land bed seedlings was vigorous markedly in culture solutions, to which added various concentrations of NaCl, The rooting ability of each seedling water not much declined in theculturing solution of up to 9.4mmhos/cm, (0.6%) of salt concentration, but it was drastically declined in the salt concentration over that. It seemed that the critical salt concentration for the rooting rice plant. The land bed seedlings in each salty condition markedly decreased compared with the water bed seeldings in transpiration rate and it showed a stronger drought resistance and contained a large amount of chlorophyll at transplanting stage, and also showed higher stability of chlorophyll at rooting stage in the salt treatment. The number of panicles, panicle weight, number of grains per panicle and ratio of matured grains of the rice plant grown by the land bed seedlings were much greater and 1,000 grain weight was less than from water bed seedlings. The cultural practices with the land bed seedlings increased the rough rice yields by 15% and 11%, respectively, compared with the yields of the moderate and late season cultures by water bed seedlings.

• Nuclear Engineering and Technology
• /
• v.39 no.2
• /
• pp.95-102
• /
• 2007

The conceptual design of the MIT modular pebble bed reactor is described. This reactor plant is a 250 Mwth, 120 Mwe indirect cycle plant that is designed to be deployed in the near term using demonstrated helium system components. The primary system is a conventional pebble bed reactor with a dynamic central column with an outlet temperature of 900 C providing helium to an intermediate helium to helium heat exchanger (IHX). The outlet of the IHX is input to a three shaft horizontal Brayton Cycle power conversion system. The design constraint used in sizing the plant is based on a factory modularity principle which allows the plant to be assembled 'Lego' style instead of constructed piece by piece. This principle employs space frames which contain the power conversion system that permits the Lego-like modules to be shipped by truck or train to sites. This paper also describes the research that has been conducted at MIT since 1998 on fuel modeling, silver leakage from coated fuel particles, dynamic simulation, MCNP reactor physics modeling and air ingress analysis.

• Plant Resources
• /
• v.5 no.3
• /
• pp.187-191
• /
• 2002

This experiment was conducted to investigate the effects of turf grass growth to seedling rates and bed soil types. The results of this experiment were summarized as follows; the more increasing the seedling rates, the plant height and leaf length were longer, but the number of leaf and number of branch were fewer. Incase of transplanting of turf grass seedling by rice transplanting machine, it might be considered that the proper alternative bed soil was sandy loam soil with regarding to the economic aspects. The maximum seedling rate of turf grass in the seedling tray for rice was 1,000 of seedling amount due to the nutrient competition with intensive seedling. As the results indicated, it might be recommended that the proper alternative bed soil was sandy loam soil with 1,000 of seedling rates in case of transplanting of turf grass seedling by rice transplanting machine.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2002.11a
• /
• pp.31-36
• /
• 2002

This experiment was conducted to investigate the effects of turf grass growth to seedling rates and bed soil types. The results of this experiment were summarized as follows; the more increasing the seedling rates, the plant height and leaf length were longer, but the number of leaf and number of branch were fewer. In case of transplanting of turf grass seedling by rice transplanting machine, it might be considered that the proper alternative bed soil was sandy loam soil with regarding to the economic aspects. The maximum seedling rate of turf grass in the seedling tray for rice was 1,000 of seedling amount due to the nutrient competition with intensive seedling. As the results indicated, it might be recommended that the proper alternative bed soil was sandy loam soil with 1,000 of seedling rates in case of transplanting of turf grass seedling by rice transplanting machine.

• Journal of Plant Biology
• /
• v.13 no.4
• /
• pp.13-22
• /
• 1970

The rice variety, Kwanok, was reared in the water, land and salt seed beds and transplanted to the reclaimed soil area having an average of 0.48% salt content (0.67% at the end of April). The plant height of land bel seedlings at transplanting stage was short but the dry-weight/plant-height ratio was large and the rooting ability was vigorous remarkably after transplantation in the salty area. The central cylinder, vessels, sclerenchyma, endodermis and other mechanical tissues of the root of land bed seedlings were well developed while the size of cortical cell layers were small. The cytoplasm of the cortical parenchyma at the root tips seemed to be most abundant in the land bed seedlings. The formation of the aerial cavity in the cortex of primary root was rapid and it seemed that the developmental mechanism of the aerial cavity in the rice plant roots was related to the development of the lateral roots.

• Plant Journal
• /
• v.8 no.1
• /
• pp.73-80
• /
• 2012

The structure and combustion characteristics, and the economic feasibility of the circulating fluidized bed combustion(CFBC) boiler using low grade coal were introduced. The economic feasibility is evaluated by comparing a 500 MW CFBC boiler power plant using low grade coal and a pulverized combustion boiler power plant with high grade coal. As the result of the evaluation, the pulverized coal combustion boiler power plant has an internal rate of return of 12.95%, 1,395.9 billion Korean won of net present value, and 6.26 years of payback period. On the other hand, CFBC boiler power plant has an internal rate of return of 13.54%, 1,704.3 billion Korean won of net present value, and 6.02 years payback period. Therefore, the CFBC boiler power plant has better feasibility in all aspects, as 0.59% higher of internal rate of return, 308.4 billion Korean won of higher net present value and 0.24 year of shorter payback period.

• Korean Journal of Environment and Ecology
• /
• v.22 no.1
• /
• pp.43-58
• /
• 2008

For this study, which was conducted in the summer from $2004\sim2007$, 10 small and medium sized streams in Korea were selected(Munsan and Gokreung Stream in the Han River watershed, Mi, Ssanggye and Nam Stream in the Nakdong River watershed, Gapeong and Jojong Stream in the Bukhan River watershed, Cheongmi, Yanghwa and Bokha Stream in the Namhan River watershed), and plant surveys were performed using the belt transect method on the most natural 1km sections of each stream in order to clarify the natural environment condition of the plants in each stream. In the results of the plant survey, the total number of plant species recorded was 296. After selecting 121 species of those surveyed plant in order of frequency, an RDA(Redundancy Analysis) and a Pearson Correlation Analysis were performed to determine the correlation between the selected plant species and environmental factors( such as distance from channel, size of bed material, number of bars, altitude, bed slope, width of channel, and measured data of water quality) of the study sites. There was no significant correlation between the 121 plant species and altitude, bed slope, and number of bars at the research sites, but the correlation of plant species with size of bed material, width of channel, electrical conductivity, and phosphate$(PO_4-P)$ concentration was from very high to moderate. Also, the spectrum of these plant species reflects the actual environmental conditions so the method used in the study seems to be correct, but owing to the range of diversity, the results of the study seem to be difficult to extend to other streams. Nevertheless, it is expected that this data can be used as a basic material for researching plants by stream characteristics or in selecting plant species for streams.

• Transactions of the Korean hydrogen and new energy society
• /
• v.24 no.2
• /
• pp.128-135
• /
• 2013

The nuclear fuel cycle plant is composed of various subsystems such as a fuel storage and delivery system (SDS), a tokamak exhaust processing system, a hydrogen isotope separation system, and a tritium plant analytical system. Korea is sharing in the construction of the International Thermonuclear Experimental Reactor (ITER) fuel cycle plant with the EU, Japan, and the US, and is responsible for the development and supply of the SDS. Hydrogen isotopes are the main fuel for nuclear fusion reactors. Metal hydrides offer a safe and convenient method for hydrogen isotope storage. The storage of hydrogen isotopes is carried out by absorption and desorption in a metal hydride bed. These reactions require heat removal and supply respectively. Accordingly, the rapid storage and delivery of hydrogen isotopes are enabled by a rapid cooling and heating of the metal hydride bed. In this study, we designed and manufactured a vertical-type hydrogen isotope storage bed, which is used to enhance the cooling performance. We present the experimental details of the cooling performances of the bed using various cooling parameters. We also present the modeling results to estimate the heat transport phenomena. We compared the cooling performance of the bed by testing different cooling modes, such as an isolation mode, a natural convection mode, and an outer jacket helium circulation mode. We found that helium circulation mode is the most effective which was confirmed in our model calculations. Thus we can expect a more efficient bed design by employing a forced helium circulation method for new beds.