• International Journal of Precision Engineering and Manufacturing
• /
• 제8권1호
• /
• pp.32-37
• /
• 2007

The outer diameter finishing grinding process required for ferrules, which are widely used as fiber optic connectors, is carried out by high-precision centerless grinding machines. In this study, the thermal characteristics of such a machine, for example, the temperature distribution, temperature rise, and thermal deformation, were estimated based on a virtual prototype and the heat generation rates of heat sources related to normal operating conditions. The prototype consisted of a concrete-filled bed. hydrostatic grinding wheel (GW) and regulating wheel (RW) spindle systems, a hydrostatic RW feed mechanism, a RW swivel mechanism, and on-machine GW and RW dressers. The reliability of the predicted results was demonstrated using temperature characteristics measured from a physical prototype. The predicted and measured results indicated that this particular high-precision centerless grinding machine had very stable thermal characteristics.

• 한국소음진동공학회논문집
• /
• 제11권4호
• /
• pp.43-51
• /
• 2001

An experimental modal analysis is the process to identify structure's dynamic characteristics such as resonant frequencies, damping values and mode shapes. An experimental model was made of stainless steel in the shape of a circular cylindrical shell and installed on the test bed with jigs. For investigating vibrational characteristics of the continuous circular cylindrical shell with intermediate supports, modal testing is performed by using impact hammer, accelerometer and 8-channel FFT analyzer. The frequency response function(FRF) measurements are also made on the experimental model within the frequency range from 0 to 4kHz. Modal parameters are identified from resonant peaks in the FRF's and animated deformation patterns associated with each of the resonances are shown on a computer screen. The experimental results are compared with analytical and FEA results.

• International Journal of Precision Engineering and Manufacturing
• /
• 제8권3호
• /
• pp.50-53
• /
• 2007

Improving the reliability or long-term dependability of a system requires a different approach from the previous emphasis on short-term concerns. The purpose of this paper is to present a reliability evaluation method for an oil cooler intended for high-precision machining centers. The oil cooler system in question is a cooling device that minimizes the deformation caused from the heat generated by driving devices. This system is used for machine tools and semiconductor equipment. We predicted the reliability of the system based on the failure rate database and conducted the reliability test using a test-bed to evaluate the life of the oil cooler. The results provided an indication of the reliability of the system in terms of the failure rate and the MTBF of the oil cooler system and its components, as well as a distribution of the failure mode. These results will help increase the reliability of oil cooler systems. The evaluation method can also be used to determine the reliability of other machinery products.

• Geomechanics and Engineering
• /
• 제2권3호
• /
• pp.161-176
• /
• 2010

Discrete Element Method (DEM) simulations were developed to investigate the effectiveness of geosynthetic reinforcement and the effectiveness of maintenance techniques performed on a simulated ballast bed subjected to dynamic loading. The results from four samples subjected each one to a total of 425 load cycles are presented: one unreinforced and unmaintained sample, one unmaintained but reinforced sample, one unreinforced sample subjected to maintenance in the form of stoneblowing after 200 load cycles, and one unreinforced sample subjected to maintenance in the form of tamping after 200 load cycles. The obtained values of permanent deformation as a function of the applied number of load cycles for the four cases are presented together allowing a comparison of the effectiveness of each technique. Moreover, snapshots of the simulated track sections are presented at different moments of the simulations. The simulations indicated that the geosynthetic reinforcement may not be beneficial for the analyzed case while stoneblowing was the most effective maintenance technique.

• Structural Engineering and Mechanics
• /
• 제69권5호
• /
• pp.547-555
• /
• 2019

In this study, vibration analysis of a concrete foundation-reinforced by $SiO_2$ nanoparticles resting on soil bed is investigated. The soil medium is simulated with spring constants. Furthermore, the Mori-Tanaka low is used for obtaining the material properties of nano-composite structure and considering agglomeration effects. Using third order shear deformation theory or Reddy theory, the total potential energy of system is calculated and by means of the Hamilton's principle, the coupled motion equations are obtained. Also, based an analytical method, the frequency of system is calculated. The effects of volume percent and agglomeration of $SiO_2$ nanoparticles, soil medium and geometrical parameters of structure are shown on the frequency of system. Results show that with increasing the volume percent of $SiO_2$ nanoparticles, the frequency of structure is increased.

• 한국산업융합학회 논문집
• /
• 제25권5호
• /
• pp.881-888
• /
• 2022

Servo presses are used in variety of ways in industry throughout the production and assembly lines of machine parts. The bottom of the servo press is fixed to a bed or a tabletop, and the press cylinder continuously operates under vertical upward loads. In this research, a static structural analysis was performed by simplifying 3D model of the servo press, and the maximum deformation was applied to the clamp and bolt. The maximum value of Von Mises stress was reported in this paper. The result was used to calculate the safety factor, and it was confirmed that the design was conservative.

• 문화기술의 융합
• /
• 제10권3호
• /
• pp.839-844
• /
• 2024

본 연구는 인접굴착공사, 지반열화 및 지하수위의 변화에 따른 지하구조물 변위거동이 궤도 손상에 미치는 영향을 해석적으로 분석하였다. 연구대상인 콘크리트궤도는 침목플로팅궤도(STEDEF)와 사전제작형궤도(B2S)를 대상으로 분석하였다. 침목플로팅궤도는 콘크리트 도상과 침목이 분리된 궤도구조이다. 사전제작형궤도는 프리캐스트 슬래브를 이용하여 레일 및 체결장치를 조립하여 레일의 탄성거동을 유도하는 궤도구조이다. 수치해석을 위해 콘크리트 궤도별로 레일부터 콘크리트 도상까지 모두 3차원 요소로 모델링하였다. 또한 지하구조물 변위거동을 변수로 설정하여 콘크리트 도상의 손상영향을 분석하였다. 수치해석을 이용하여 융기 및 침하에 따른 콘크리트 도상 응력을 분석하였으며, 인장강도 및 전단강도와 비교하여 균열 발생 수준을 분석하였다. 분석결과, 동일한 융기 및 침하발생 시 사전제작형궤도보다 침목플로팅궤도가 취약한 것으로 분석되었다. 또한 최대 융기 및 침하부 기준으로 침목플로팅궤도의 균열발생 영향범위가 큰 것으로 분석되었다.

• 한국수자원학회논문집
• /
• 제42권2호
• /
• pp.141-148
• /
• 2009

하천은 지역마다 독특한 하도특성을 지니고 있다. 우리나라는 전 국토의 70 %가 산지로 구성되어 있으며, 이 가운데 노년기에 지형도 적지 않다. 이를 가로 지르는 우리나라 하천에서 특이한 하도형태의 모습을 보이는 구간이 곳곳에 산재하고 있다. 그 대표적인 모습이 충적하도와 침식하도가 연속해 발생하는 과정에서 나타나는 하천 협소부이다. 하천 협소부란 하천지형학에서 일반적으로 쓰이고 있는 용어이며, 하도수리학에서는 지배유량에 종속되는 일정하폭의 범위를 크게 벗어난 하천병목구간을 뜻한다. 이러한 협소부 주변지역은 전형적인 수해상습 지역이 되는 경우가 많다. 이러한 상황임에도 불구하고 현재까지 우리나라에서는 이러한 협소부 구간에서 하도특성을 반영한 조사 및 연구 사례가 전무한 실정이다. 따라서, 본 연구에서는 낙동강 선산지역에 위치한 하천 협소부에서 하도형태에 대하여 조사하고 하도수리학적으로 분석하고 평가하였다. 연구 결과, 모래하천인 조사구간의 저수로 하상에서 아주 미세한 유사분급 현상은 확인할 수 있었지만, 하도변화의 작용력에 의한 유사분급 현상이라 판단하기에는 어려운 부분이 있었다. 이는 완만한 하상경사, 균일성에 가까운 하상재료의 분포 및 공급에 기인한다고 판단되었다. 그러나 이와 같은 자연적인 현상보다는 골재채취 등의 인위적 교란에 따른 유사분급이 확연하다고 추정되었다. 그리고 협소부의 배수구역에서 과거 활발했던 단단면 이동상 하도가 유심부의 이동과 더불어 최근 급격하게 복단면화가 진행되고 있음을 확인하였다. 이와 더불어 저수로의 하폭이 크게 줄어드는 현상을 확인할 수 있었다. 이와 같은 현상은 궁극적으로 이상홍수 발생시 복단면 가중 혹은 홍수단면적 축소의 원인이 된다. 또한, 저수로에서 호안 또는 제방 아래 부분의 국소세굴이 야기될 수 있음을 시사한다.

• 복식문화연구
• /
• 제18권3호
• /
• pp.423-435
• /
• 2010

The purpose of this study was to observe the current consumption of bedding products, purchase behavior, and to compare between purchase criteria and degree of satisfaction after the purchase. Independent variables are age, consumer's knowledge and involvement about the bedding materials. This study can contribute for bedding product marketing strategies and design development. We used questionnaires that were distributed to 500 females aged in 20s to 50s, using stratified sampling method. Only 457 reliable questionnaires were selected for statistical analysis. Data were analyzed statistically through frequencies, paired t-test, ANOVA, Dunnett T3, Chi-test, using SPSS (Version 12.0). The results of this study are as follows. The types of bedroom was significantly associated with age variables. Women in 20's to 30's were using the mixture of Ondol and bed(chimdaie), while 40's to 50's women were using bed for all their rooms. The usage of filling material for the comforter(ibul) was significantly associated with the age group. 20's to 30's age group preferred synthetic fibers for the filling, while 40 to 50's women preferred cotton fibers. Generally, the most of people used quilted comforter and they used cotton material as filling materials of comforters. As to purchase behavior, the most frequent place of purchase was specialty store of bedding products, and the highest percentage of motivation for purchase was "deformation after the use/throwing away". Purchase motivation for bedding was related with the age variable and the clusters based on the knowledge of bedding materials. We analysed the comparison test purchase criteria and satisfaction. In all attributes except brand image, people evaluated lower in satisfaction after purchase than in criteria before purchase.

• Ecology and Resilient Infrastructure
• /
• 제7권3호
• /
• pp.218-226
• /
• 2020

본 연구는 수치모형을 기반으로 하는 예측방법론을 위한 수치기법개발의 첫 단계로서 제방형 보에 의한 자유형 월류흐름에 대한 수치해석실험을 수행하였다. 이를 위해 2차원 흐름모형인 Nays2DH를 이용하여 기존에 수행된 실험자료를 바탕으로 수치실험을 수행하여 모형을 비교검증하였다. 우선은 위어의 형태에 의한 불연속 흐름의 수치적 재현성에 대해서 고찰했으며 하도의 전처리를 통해 모의흐름을 보정하였다. 더 나아가, 수문갯수에 따른 월류흐름의 예측모의를 수행하여 결과를 비교하였다. 모의결과, 수문의 갯수가 증가할 경우 동일한 통수단면적에서 보 하류부의 최대유속이 증가할 수 있다는 것을 알 수 있었으며 이는 하상변동에도 영향을 줄 것으로 판단된다. 이러한 결과들을 통해, 본 연구는 추후의 보의 운영에 따른 흐름 및 유사이송 등을 고려하는 수리학적 연구의 기초자료를 제공할 수 있었다.