• 제목/요약/키워드: Beam-slab system

검색결과 136건 처리시간 0.022초

방진궤도가 부설된 역사의 진동해석 기법 (Vibration Analysis Method for Railway Structure with Floating Slab)

  • 양신추;김태욱;강윤석
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2003년도 춘계학술대회논문집
    • /
    • pp.561-566
    • /
    • 2003
  • In this paper, a numerical method for evaluating the efficiency of vibration reduction of substructure under floating slab track is developed for optimal design of floating slab track. The equation of motion for train and track interaction system is derived by applying compatibility condition at the contact points between wheels and rails. The train is modelled by 3-masses system and the track by continuous support beam system. Numerical analyses are carried out to investigate the effects of train speed, stiffness and damping of slab-pad, and track irregularity upon vibration reduction in substructure under the track.

  • PDF

인공 신경망을 이용한 플랫 슬래브 주차장 구조물의 등가차량하중계수 (Determination of Equivalent Vehicle Load Factors for Flat Slab Parking Structures Using Artificial Neural Networks)

  • 곽효경;송종영
    • 한국전산구조공학회논문집
    • /
    • 제16권2호
    • /
    • pp.115-124
    • /
    • 2003
  • 이 논문에서는 기존의 보-거더 구조계 주차장 구조물에 대한 차량하중영향 연구를 토대로, 플랫 슬래브 구조계에서 차량하중영향에 대한 연구를 수행하였다. 먼저, 최대부재력을 일으키는 차량하중의 적용을 위해 플랫 슬래브의 주요 설계지점에 대한 영향면을 구성하였으며, 플랫 슬래브의 등가차량하중계수를 인공 신경망기법을 이용하여, 슬래브 두께, 지판 두께, 지판 크기, 슬래브의 단변, 장변 길이 등 주요구조변수로 제시하였다. 사용된 신경망의 훈련은 많은 패턴수를 갖는 비선형 회귀분석에 적합한 Levenberg-Marquardt 알고리즘을 이용하였으며 해석결과와 인공 신경망의 출력의 비교를 통해 알고리즘의 유효성을 검증하였다. 플랫 슬래브 구조계의 등가차량하중계수를 살펴보면, 보-거더 구조계의 경우와 유사하게 주열대와 중간대의 정모멘트 부재력에서 차량하중에 매우 취약함을 알 수 있었다.

Time dependent finite element analysis of steel-concrete composite beams considering partial interaction

  • Dias, Maiga M.;Tamayo, Jorge L.P.;Morsch, Inacio B.;Awruch, Armando M.
    • Computers and Concrete
    • /
    • 제15권4호
    • /
    • pp.687-707
    • /
    • 2015
  • A finite element computer code for short-term analysis of steel-concrete composite structures is extended to study long-term effects under service loads, in the present work. Long-term effects are important in engineering design because they influence stress and strain distribution of the structural system and therefore contribute to the increment of deflections in these structures. For creep analysis, a rheological model based on a Kelvin chain, with elements placed in series, was employed. The parameters of the Kelvin chain were obtained using Dirichlet series. Creep and shrinkage models, proposed by the CEB FIP 90, were used. The shear-lag phenomenon that takes place at the concrete slab is usually neglected or not properly taken into account in the formulation of beam-column finite elements. Therefore, in this work, a three-dimensional numerical model based on the assemblage of shell finite elements for representing the steel beam and the concrete slab is used. Stud shear connectors are represented for special beam-column elements to simulate the partial interaction at the slab-beam interface. The two-dimensional representation of the concrete slab permits to capture the non-uniform shear stress distribution in the horizontal plane of the slab due to shear-lag phenomenon. The model is validated with experimental results of two full-scale continuous composite beams previously studied by other authors. Results are given in terms of displacements, bending moments and cracking patterns in order to shown the influence of long-term effects in the structural response and also the potentiality of the present numerical code.

골형 합성 테크플레이트를 사용한 반슬림 합성보의 개발에 관한 실험적 연구 (An Experimental Study on the Development of Semi-Slim Composite Beam with Traperzodial Composite Deck Plate)

  • 배규웅;오상훈;허병욱;양명숙
    • 한국강구조학회 논문집
    • /
    • 제13권1호
    • /
    • pp.29-40
    • /
    • 2001
  • 상업건축물에서 사용이 증가하고 있는 철골조 건물은 일반적으로 콘크리트 바닥 슬래브와 함께 합성거동하도록 설계된다. 현제 "합성 구조"가 사용성 측면에서 경제적이고 작업성이 좋으며, 시공상의 편의성 등의 장점이 있다는 것은 일반화된 사실이지만, 자체의 춤이 깊기 때문에 철골조 아파트에 적용되기에는 어려움이 있다. 따라서 본 연구는 이러한 합성의 전체 춤을 절감할 수 있는 반슬림플로어 시스템을 개발하였다. 본 시스템은 철골보 춤내에 콘크리트 슬래브를 삽입하여 일체화함으로써 철골조 고층건물에서 층고를 최소화 할 수 있는 공법이다. 실험은 12개의 합성슬래브 실험체를 데크현상, 슬래브폭, 스터드볼트의 유무와 콘크리트 토핑두께를 변수로하여 휨성능을 평가하였다.

  • PDF

공동주택 리모델링 현장의 바닥충격음 저감대책 (Reduction Method for Floor Impact Noise on APT Remodeling)

  • 박철용;홍구표;이중원
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2009년도 춘계학술대회 논문집
    • /
    • pp.524-525
    • /
    • 2009
  • Heavy-weight impact noise(HN) is the most irritating noise in Korean apartment houses. It has been proclaimed standard floor system of 210mm thick slab with isolation material in the wall type structure. But this regulation is applied only new construction field and is not considered remodeling field. In general, the LN can be reduced by using isolation material but HN is known as relating with stiffness, strength & boundary condition of slab. Therefore it is difficulty in improving the HN on remodeling field. In this study, We conducted the reinforcement of concrete slab using C.F.S.(carbon fiber sheet), steel plate and steel beam after on-dol with isolation material on the remodeling field. As the test results, It appeared using C.F.S was no improved but using steel plate & steel beam were a little improved on HN.

  • PDF

2방향 중공슬래브 구조시스템의 비선형 지진거동 평가 (Evaluation of The Nonlinear Seismic Behavior of a Biaxial Hollow Slab)

  • 박용구;김현수;고현;박현재;이동근
    • 한국지진공학회논문집
    • /
    • 제15권1호
    • /
    • pp.1-10
    • /
    • 2011
  • 최근 들어 슬래브 차음성능에 대한 관심이 커지고 있으며 이에 대응하여 슬래브 두께 증가가 요구되고 있다. 또한 건축물의 효율적인 공간 활용을 위하여 장스팬의 바닥판 시스템이 많이 사용되고 있다. 이러한 요구를 만족하기 위해 개발된 바닥판 시스템중의 하나가 2방향 중공슬래브이다. 2방향 중공슬래브의 구조적 성능을 확인하기 위해서는 지진이 발생하였을 때의 안전성에 대한 검토가 반드시 필요하다. 따라서 본 연구에서는 재료비선형 시간이력해석을 통하여 2방향 중공슬래브의 지진하중에 대한 거동을 평가하였다. 효율적인 시간이력해석을 위하여 기존에 제안된 등가플레이트 모델을 사용하였고, 또한 유효보폭법을 적용한 비선형 모델을 이용하여 2방향 중공슬래브를 적용한 예제구조물의 내진성능을 평가하였다. 이를 통하여 2방향 중공슬래브를 사용한 구조물이 동일한 슬래브 두께의 일반 플랫 플레이트 구조물에 비하여 내진성능이 저하되지 않음을 확인 할 수 있었다.

무량판 아파트 구조시스템 해석 (Analysis of Structural System of Flat-Plate Apartment Buildings)

  • 이지웅;강수민;김욱종;이도범;천영수;이현호
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 2005년도 춘계 학술발표회 논문집
    • /
    • pp.36-43
    • /
    • 2005
  • Stiffness reduction factor of slab in flat-plate structure is proposed in comparison with UCB test result. Then analysis of structural system of flat-plate apartment buildings is carried out by using effective beam width method and finite element method. Effective beam width method overestimates the lateral stiffness of the system where columns are arranged atypically and overestimates the stiffness of slab-wall joint.

  • PDF

A comprehensively overall track-bridge interaction study on multi-span simply supported beam bridges with longitudinal continuous ballastless slab track

  • Su, Miao;Yang, Yiyun;Pan, Rensheng
    • Structural Engineering and Mechanics
    • /
    • 제78권2호
    • /
    • pp.163-174
    • /
    • 2021
  • Track-bridge interaction has become an essential part in the design of bridges and rails in terms of modern railways. As a unique ballastless slab track, the longitudinal continuous slab track (LCST) or referred to as the China railway track system Type-II (CRTS II) slab track, demonstrates a complex force mechanism. Therefore, a comprehensive track-bridge interaction study between multi-span simply supported beam bridges and the LCST is presented in this work. In specific, we have developed an integrated finite element model to investigate the overall interaction effects of the LCST-bridge system subjected to the actions of temperature changes, traffic loads, and braking forces. In that place, the deformation patterns of the track and bridge, and the distributions of longitudinal forces and the interfacial shear stress are studied. Our results show that the additional rail stress has been reduced under various loads and the rail's deformation has become much smoother after the transition of the two continuous structural layers of the LCST. However, the influence of the temperature difference of bridges is significant and cannot be ignored as this action can bend the bridge like the traffic load. The uniform temperature change causes the tensile stress of the concrete track structure and further induce cracks in them. Additionally, the influences of the friction coefficient of the sliding layer and the interfacial bond characteristics on the LCST's performance are discussed. The systematic study presented in this work may have some potential impacts on the understanding of the overall mechanical behavior of the LCST-bridge system.

지열을 이용한 외기부하저감시스템의 외기온도와 출구온도의 상관관계 분석 (A Study on the Correlation between Outdoor Air and Outlet Air Temperature in a Fresh Air Load Reduction System by Using Geothermal Energy)

  • 손원득;박경순
    • 설비공학논문집
    • /
    • 제22권9호
    • /
    • pp.620-627
    • /
    • 2010
  • This paper presents a feasibility study of a fresh air load reduction system by using an underground double floor space. The fresh air is introduced into the double slab space and passes through the opening bored into the footing beam. The air is cooled by the heat exchange with the inside surface of the double slab space in summer, and heated in winter. This system not only reduces sensible heat load of the fresh air by heat exchange with earth but also reduces latent heat load of the fresh air by ad/de-sorption of underground double slab concrete. In this paper, we investigated the correlation between outdoor air temperature and outlet air temperature in the system. In conclusion, from the results of the high correlation we proposed a equation of regression for the outlet air temperature in the system by using linear regression analysis.

PC Beam 교의 슬래브 연속화 보강 효과에 대한 연구 (A Study on the Continuation Effect of the PC Beam Bridge Reinforced by Span-Jointing of Slab)

  • 선창호;이종석;김익현
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제6권4호
    • /
    • pp.225-232
    • /
    • 2002
  • 최근들어, 단순지지 교량의 내하력 증가를 위하여 교량을 연속교의 형식으로 바꾸는 슬래브 연속화공법이 많이 적용되고 있다. 일반적으로 연속화공법은 자중을 제외한 사하중에 대하여 연속교거동을 하게 하는 공법으로서 외부강선 보강공법과 병행해서 많이 사용된다. 본 논문에서는 이러한 연속화공법에 의하여 보강된 교량을 대상으로 하여 현장재하시험과 수치해석을 수행하여 내하력증가와 연속화효율에 관한 연구결과를 나타내었다. 연속화에 의한 교량시스템의 강성증가로 부재의 처짐 및 응력은 다소 감소하였으나 연속화효율은 완전연속과 대비하여 약 35-45% 수준으로 비교적 낮은 연속화효과를 나타내었다.