• 제목/요약/키워드: Beam-Column

검색결과 1,543건 처리시간 0.032초

Soil Nail로 보강된 현장타설말뚝의 하중전이 분석 (Load Transfer Analysis of Drilled Shafts Reinforced by Soil Nails)

  • 정상섬;함홍규;이대수
    • 한국지반공학회논문집
    • /
    • 제20권1호
    • /
    • pp.37-47
    • /
    • 2004
  • 본 연구에서는 암반에 근입된 현장타설말뚝의 지지력을 높이기 위해 말뚝 주면에 soil nail을 정착한 타설말뚝의 축하중 해석을 수행하여 그 거동을 파악하였으며, soil nail의 유ㆍ무에 따른 보강효과를 분석하였다. 이를 위해 Beam-Column모델을 이용하여 현장타설말뚝과 지반을 모델링하고 하중전이곡선을 사용하여 말뚝지반의 상호작용을 고려하였다. 무보강 말뚝의 경우, 서해대교 현장재하시험결과 및 범용 프로그램인 Shaft 4.0의 해석결과와 비교ㆍ분석을 수행하였다. 보강형 말뚝의 경우에는 말뚝이 타설되는 지반을 [사질토+풍화암], [사질토+연암], [사질토+경암]으로 나누어 지반조건에 따른 soil nail의 보강효과를 파악하였다. 본 해석결과와 현장 실측치, SHAFT 4.0의 해석결과를 분석한 결과 제안된 주면하중전이함수 중 사질토에서는 Vijayvergiya의 함수, 암반에서는 O'Neill-Hassan의 함수가 암반에 근입된 현장타설말뚝의 거동을 비교적 적절히 예측함을 알 수 있었다. 이를 토대로 예측한 보강형 현장타설말뚝의 보강효과는 soil nail까지 하중전이가 나타나는 풍화암층에서 가장 크고, 암질이 양호한 연암과 경암층에서는 그 효과가 그다지 크지 않음을 알 수 있었다.

Direct Method에 의한 鐵筋콘크리트 二方向슬라브의 最適設計에 관한 硏究 (A Study on the Optimal Design Method of Reinforced Concrete Two Way Slabs)

  • 김용희;류홍열;박문호
    • 한국농공학회지
    • /
    • 제26권2호
    • /
    • pp.97-105
    • /
    • 1984
  • We have, at present, found some studies on the optimum design of reinforced concrete about the simple slab but very few about the multi-story and multi-span slab. The aim of this study is to make a optimum design of coalesced beam and column slab constructure. Some results of the evaluation by using the optimalized algorithm that was developed in this study are as follows. 1. Slab was mainly restricted by the constraint of effective depth, bending moment, and minimum steel ratio; especially the effective depth was the preceding crifical constraint. In the optimum design of slab, therefore, the constraint about the minimum thickness should be surely considered. 2. This optimum design is good economy as much as some 3.4&~6.2% compared with the conventional design method. 3. In most case, it was converged by 3 to 6 iteratin regardless of the highest or lowest value and only in case of N=1 and case 1, there is a little oscillation after the 3rd iteration but it makes no difference in taking either the highest or lowest value because the range of oscillation is low as much as about 1.2% of the total construction cost. 4. In this study the result seeking for constraints that make no difference in the least cost design shows that shear stress and maximum steel ration may not be considered in it. 5. Bending moment was converged by one time iteration regardless of the initial value, while steel ratio, in most case, by two times because both bending moment and steel ratio are the fuction of effective depth.

  • PDF

보 상부철근의 슬래브 내 분산배근에 따른 휨강도의 수치해석적 연구 (A Numerical Study on Flexural Strength with the Spreading of Upper Reinforcement of Girder into the Adjoining Slab)

  • 박정현
    • 한국산학기술학회논문지
    • /
    • 제8권5호
    • /
    • pp.1179-1185
    • /
    • 2007
  • 본 논문은 슬래브내의 보 상부철근의 영향을 파악하기 위한 해석적 연구로 슬래브가 있는 보-기둥 접합부에서 기존의 설계방법인 직사각형 단면 내에 상부철근을 2단으로 배근한 보와 동일량의 상부철근을 직사각형 단면에 1단만 배근하고 나머지는 보의 적정 플랜지폭 내에 분산 배치하여 상부철근의 배치에 따라 보의 휨 강도가 어떻게 변화하는지를 정량적으로 평가할 수 있도록 하는 것이다. 이러한 연구 목적을 수행하기 위하여 상용화된 범용 구조해석 프로그램인 ANSYS를 이용하여 모델링하고, 비선형 구조해석을 실시하였다. 플랜지폭, 플랜지(슬래브)두께 및 상부 플랜지내에서의 철근의 위치 등을 변수로 한 수치해석을 통하여 보의 최대내력을 비교 검토한 결과, 플랜지폭의 영향은 상부 인장철근을 1단으로 직사각형 단면에서 멀리 배치할수록 내력차이가 증가하는 것을 확인하였으며, 플랜지폭이 동일한 계열에서 내력이 증가되는 비율은 플랜지두께의 영향을 크게 받지 않는 것으로 나타났고, 상부 인장철근의 위치에 따른 내력은 슬래브두께가 증가할수록 내력의 차이가 줄어드는 것으로 나타났다.

  • PDF

2차 탄성해석법에 의한 강뼈대 구조물의 최적설계 (An Optimum Design of Steel Frames by Second Order Elastic Analysis)

  • 박문호;장준호;김기욱
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제10권2호
    • /
    • pp.123-133
    • /
    • 2006
  • 본 연구의 목적은 다단계 동적계획법 및 축차무제약 최소화기법을 이용하여 강접 및 다양한 반강접 접합부 모델을 가진 뼈대 구조물의 최적화 알고리즘을 개발하는데 있다. Bowing effect를 고려한 비선형 보-기둥이론을 사용하였으며, 보-기둥의 접합부는 반강접접합부인 양면 복부앵글을 가진 접합부, 상 하플랜지 접합부, 양면복부앵글을 가진 상 하플랜지 접합부를 고려하여 연구를 수행하였으며, 각 접합부의 해석모델은 수정된 지수모델, 다항식 모델, 파워모델을 사용하였다. 최적화문제에 있어서 목적함수는 강재의 중량을 취하였으며, 설계변수는 부재의 단면치수를 선택하였다. 설계제약조건은 축력, 전단력 및 휨모멘트의 저항성과 사용성에 대해 수식화하였다. 본 연구에서 개발된 기하학적 비선형을 고려한 2차 탄성해석법을 이용하여 강접 및 다양한 모델을 가진 반강접 강뼈대 구조물의 종합적인 연속 최적설계 프로그램을 개발하였다.

In-situ Production Analysis of Composite Precast Concrete Members of Green Frame

  • Lim, Chae-Yeon;Joo, Jin-Kyu;Lee, Goon-Jae;Kim, Sun-Kuk
    • 한국건축시공학회지
    • /
    • 제11권5호
    • /
    • pp.501-514
    • /
    • 2011
  • Recently, there have been many cases in which the difficulty of repair and replacement of principal elements in the bearing wall structure for apartment buildings, which is a major part of apartment buildings in Korea, has led to the reconstruction of buildings rather than their remodeling. To address this problem, the Korea government now allows a floor area ratio of up to 20 %, and has relaxed the building height limits to encourage the use of a rahmen structure instead of a bearing wall structure. However, since reinforced concrete rahmen structures have many problems, including higher floor height and greater construction cost, a great deal of research into rahmen composite precast concrete structures have been conducted. Green Frame, one of the developed prototypes, is expected to provide economic benefits through in-situ production for precast concrete column and beam. For in-situ production of composite precast concrete members, a detailed plan for production, curing, and installation is needed. However, it needs to be confirmed that the space is sufficient to produce the precast concrete members on-site before planning those activities. Therefore, this study proposes in-situ production analysis of composite precast concrete members of Green Frame with the evaluation of structural safety and available area on the parking structure. The result of this study shows that the in-situ production of precast concrete members is possible through a case study.

개선소성힌지해석과 유전자 알고리듬을 이용한 평면 강골조 구조물의 퍼지최적설계 (Fuzzy Optimum Design of Plane Steel Frames Using Refined Plastic Hinge Analysis and a Genetic Algorithm)

  • 이말숙;윤영묵;손수덕
    • 한국강구조학회 논문집
    • /
    • 제18권2호
    • /
    • pp.147-160
    • /
    • 2006
  • 본 논문에서는 개선소성힌지해석과 유전자 알고리듬을 이용한 평면 강골조 구조물의 퍼지최적설계 방법을 제시하였다. 개선소성힌지해석에서는 강골조 구조물의 기하학적 비선형성을 고려하기 위해 보-기둥 요소의 안정함수를 사용하였으며, 재료적 비선형을 고려하기 위해 잔류응력, 소성힌지, 그리고 기하학적 불완전성 등에 의한 점진적인 강성감소모델을 사용하였다. 유전자 알고리듬에서는 토너먼트 선택방법과 마이크로 유전자 알고리즘을 사용하였다. 목적함수로는 구조물의 총중량을 사용하였으며, 제약조건으로는 하중-저항능력, 사용성, 연성도, 그리고 시공성에 관한 기준을 고려하였다. 퍼지최적설계에서는 명확한 목적함수와 퍼지제약을 가지는 경우에 한하여 허용 오차는 제한값의 5%로 선택하고 비소속함수와 레벨컷 방법을 이용하여 0에서 1까지 0.2간격으로 나누어 최적화하였다. 여러 평면 강골조 구조물의 최적설계를 수행하여 일반GA최적설계와 퍼지GA최적설계의 최적값을 비교하였다.

현장조사를 통한 철근콘크리트 구조 부재의 시공오차에 관한 연구 (Field Survey on the Construction Errors for the Members of Reinforced Concrete Structures)

  • 윤상천;지남용;최기봉
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제14권3호
    • /
    • pp.201-208
    • /
    • 2010
  • 본 연구에서는 현장타설 철근콘크리트 구조체에 대한 국내외 허용오차 관련기준을 검토하여, 현행 국내 허용오차 기준의 수준을 검토함과 동시에 합리적인 시공오차 측정방법과 측정기기를 제시하였다. 또한 국내 공동주택을 대상으로 철근콘크리트 구조 부재의 시공오차를 조사하여 현재 국내 시공오차 허용범위 만족도를 검토하고, 구조체의 저항능력 평가 시, 부재크기 오차의 불확실성을 고려한 합리적인 안전성 평가를 위한 자료를 제공한다.

Research on prefabricated concrete beam-column joint with high strength bolt-end plate

  • Shufeng, Li;Di, Zhao;Qingning, Li;Huajing, Zhao;Jiaolei, Zhang;Dawei, Yuan
    • Structural Engineering and Mechanics
    • /
    • 제74권3호
    • /
    • pp.395-406
    • /
    • 2020
  • Many prefabricated concrete frame joints have been proposed, and most of them showed good seismic performance. However, there are still some limitations in the proposed fabricated joints. For example, for prefabricated prestressed concrete joints, prefabricated beams and prefabricated columns are assembled as a whole by the pre-stressed steel bar and steel strand in the beams, which brings some troubles to the construction, and the reinforcement in the core area of the joints is complex, and the mechanical mechanism is not clear. Based on the current research results, a new type of fabricated joint of prestressed concrete beams and confined concrete columns is proposed. To study the seismic performance of the joint, the quasi-static test is carried out. The test results show that the nodes exhibit good ductility and energy dissipation. According to the experimental fitting method and the "fixed point pointing" law, the resilience model of this kind of nodes is established, and compared with the experimental results, the two agree well, which can provides a certain reference for elasto-plastic seismic response analysis of this type of structure. Besides, based on the analysis of the factors affecting the shear capacity of the node core area, the formula of shear capacity of the core area of the node is proposed, and the theoretical values of the formula are consistent with the experimental value.

깊은굴착 설계를 위한 인공신경망 개발에 관한 연구 (A Study on Development of Artificial Neural Network (ANN) for Deep Excavation Design)

  • 유충식;양재원
    • 한국지반신소재학회논문집
    • /
    • 제17권4호
    • /
    • pp.199-212
    • /
    • 2018
  • 본 연구에서는 깊은 굴착에 따른 인접구조물의 손상 평가 및 벽체 구조물의 안정성 평가를 하기 위한 지표의 거동 및 벽체 부재력의 효율적인 예측기법에 대한 내용을 다루었다. 우선적으로 지표의 거동 및 벽체 부재력에 영향을 미치는 매개 변수에 대한 연구를 수행하였고, 이를 토대로 다양한 굴착 조건에 대해 수치해석을 실시한 결과를 통해 데이터베이스를 구축하였다. 구축된 데이터베이스를 토대로 벽체의 부재력과 지표의 거동 각각의 해석 결과에 대한 인공신경망 엔진 학습을 수행하였으며 학습된 인공신경망을 이용하여 예측된 결과와 사용된 데이터베이스의 결과를 비교하여 인공신경망 엔진이 벽체의 부재력 및 지표의 거동예측에 효율적임을 검증하였다.

디씨알이 인천공장 발파해체 시공사례 (Case Study on the Explosive Demolition of DCRE Incheon Plant)

  • 김상민;박근순;김호준;김희도;김갑수;안경로
    • 화약ㆍ발파
    • /
    • 제37권1호
    • /
    • pp.34-47
    • /
    • 2019
  • 본 사례연구는 인천 학익동에 위치한 디씨알이 인천공장 발파해체 프로젝트에 관한 것이다. 대상건물은 건물내부에 위치한 굴뚝형태의 강구조 설비들이 가동 시 내뿜었던 수백도의 고열과 해풍 등의 영향으로 주요 구조체에 극심한 노후화가 진행되었다. 이로 인해 기둥과 보의 콘크리트들이 탈락하여 녹이 슨 철근들이 노출되어 있었고, 일부 슬래브들은 커다랗게 구멍이 뚫려있어 작업 인원의 접근도 힘들 만큼 구조물이 위험한 상태였다. 따라서 중장비가 건물 내부로 진입하여 작업하는 기계식 철거방법의 적용이 불가능하여 건물 내부의 설비구조물들을 그대로 두고 해체 할 수 있는 발파해체공법을 적용하였다. 발파순서는 (1)탄화탑 ${\rightarrow}$ (2)연돌 2 ${\rightarrow}$ (3)연돌 1의 순서로 진행되도록 계획하였다. 탄화탑과 연돌들에 설치된 폭약을 순차적으로 기폭시키는 데에는 총 406개의 전자뇌관(Unitronic 600)이 사용되었다.