• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2009년도 춘계학술발표회 논문집
• /
• pp.41-48
• /
• 2009

본 논문에서는 측량용 3차원 레이저 스캐너의 소형화를 위해 광원으로 레이저 다이오드를 사용한 송신부 광학계의 설계를 다루었다. 레이저 다이오드를 사용할 경우 활성층의 특성상 타원형의 Beam shape를 갖게 되고 또한 비점수차를 지닐 수 밖에 없는 문제를 가지고 있다. 본 연구에서는 레이저 다이오드의 비점수차를 제거하기 위하여 시준렌즈와 원통형렌즈를 사용하였으며 1mrad 의 빔 발산각을 갖는 평행광을 만들기 위해 핀홀과 Aperture의 사용을 제안하였다. 이를 바탕으로 실제 제작된 소형 광학계를 사용하여 직경 3.5mm, 0.3mrad 이하의 빔 발산각을 갖는 평행광을 구현하였다.

• 한국정밀공학회지
• /
• 제29권7호
• /
• pp.737-744
• /
• 2012

EDM is the manufacturing process that uses the thermal energy to machine electrically conductive part. Despite a lot of research has been conducted for decades, the best aspect ratio of the micro hole using micro-EDM has not been over 30, yet. In the present study, new fabrication scheme was introduced to increase the aspect ratio of micro hole dramatically. Micro holes with less than 10 aspect ratio were aligned and welded together to manufacture a micro hole with extreme aspect ratio. Alignment of the micro hole with over 380 aspect ratio was conducted by the home-made apparatus installed with microscope and laser beam. The micro hole with extreme aspect ratio was used to shape pencil beam from proton beam generated from MC-50 cyclotron. The pencil beam was utilized to machine test specimen whose result was compared with GEANT4 computer simulation. It was shown that the experimental and simulation result were closer as the aspect ratio of the micro hole was bigger.

• Radiation Oncology Journal
• /
• 제10권1호
• /
• pp.95-100
• /
• 1992

LINAC 뇌정위적 방사선 수술은 multiple noncoplanar arc, 3 차원 선량 계산 및 많은 조사 변수들이 사용되기 때문에 간단한 경우에도 최적 선량분포를 얻기 위해서는 많은 시간이 요구된다. 본 논문에서는 실험적 방법과 분석적 방법을 통한 유용한 방법을 제시하기 위한 것으로서, 보다 자세한 방법 및 내용은 앞으로의 발표 논문에서 다루게 된다. 실험적 방법으로 2가지 방법에의하면, 첫번째 방법은 multiple isocenter를 이용하는 것이고, 두번째 방법은 beam's eye view와 field shaping을 이용한 conformal therapy이다. 분석적 방법은 최적 조사조건을 찾기 위하여 computer-aided design optimization 방법을 이용하는 것이다.

• 한국생산제조학회지
• /
• 제18권3호
• /
• pp.255-260
• /
• 2009

This paper presents an experimental result of virtual mode input shaping for positioning stage. Input shaping is liable to increase the rise time of the system, which often degrades the performance of system. The virtual mode input, shaping is an input shaper design method to improve this problem. Experiments are performed with a precise positioning stage with a flexible beam of which natural frequency is adjustable. The experimental results show that the virtual-mode shaper is useful to reduce the rise time as well as the residual vibration of precise positioning stages.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.889-890
• /
• 2010

• Current Optics and Photonics
• /
• 제1권1호
• /
• pp.23-28
• /
• 2017

The laser has been regarded as the potential illumination source for the next generation of projectors. However, currently the major issues in applying the laser as an illumination source for projectors are beam shaping and laser speckle. We present a compact solution for both issues by using a vibrating diffractive optical element (DOE). The DOE is designed and fabricated, and it successfully transforms the circular Gaussian laser beam to a low speckle contrast uniform rectangular pattern. Under a vibration frequency of 150 Hz and amplitude of $200{\mu}m$, the speckle contrast value is reduced from 67.67% to 13.78%, and the ANSI uniformity is improved from 24.36% to 85.54%. The experimental results demonstrate the feasibility and potential of the proposed scheme, and the proposed method is a feasible approach to the miniaturization of laser projection display illumination systems.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권11호
• /
• pp.654-659
• /
• 2005

An improved power supply for APD(Avalanche Photo Diode) with a received optical power monitoring circuit allows the received optical power increase temporary without of the degradation of the electrical signal. For the cost reduction and simple fabrication, an improved power supply has been proposed that it was designed for driving a APD as a receiving device of a wireless optical transmission system. It was demonstrated that it was possible to improve a dynamic range by compensating the temperature coefficient of the APD up to 1.0 V/$^{\circ}C$ through the power supply. Also, for an efficient transmission at the receiver end, a simple structure of a single cylindrical micro-lens configuration was used in conjunction with the laser diode to partially compensate a laser beam ellipticity. For this purpose, an astigmatism introduced by the micro-lens is utilized for the additional compensation of the beam ellipticity at the receiver end. In this paper, it is demonstrated that an efficient beam shaping is realized by using the proposed configuration consisting of the single lens attached to the laser diode.

• 한국레이저가공학회지
• /
• 제16권3호
• /
• pp.27-31
• /
• 2013

To engrave high-density circuit-line patterns in IC substrates, we applied a projection ablation technique in which a dielectric ($ZrO_2/SiO_2$) mask, a DPSS UV laser instead of an excimer laser, a refractive beam shaping optics and a galvo scanner are used. The line/space dimension of line patterns of the dielectric mask is $10{\mu}m/10{\mu}m$. Using a ${\pi}$ -shaper and a square aperture, the Gaussian beam from the laser is shaped into a square flap-top beam; and a telecentric f-${\theta}$ lens focuses it to a $115{\mu}m{\times}105{\mu}m$ flat-top beam on the mask. The galvo scanner before the f-${\theta}$ lens moves the beam across the scan area of $40mm{\times}40mm$. An 1:1 projection lens was used. Experiments showed that the widths of the engraved patterns in a buildup film ranges from $8.1{\mu}m$ to $10.2{\mu}m$ and the depths from $8.8{\mu}m$ to $11.7{\mu}m$. Results indicates that it is required to increase the projection ratio to enhance profiles of the engraved patterns.

• 한국레이저가공학회지
• /
• 제16권4호
• /
• pp.1-6
• /
• 2013

Femtosecond laser patterning of ITO on a touch screen panel with a shaped fs laser beam was investigated. A quasi flat-top beam was formed using a variable mask and a planoconvex lens. The spatial profile of the original Gaussian beam and the shaped beam were monitored by a CCD beam profiler. The laser patterned ITO film was examined using an optical microscope, Scanning Electron Microscope (SEM) with Energy Dispersive X-ray Spectroscopy (EDS), and Atomic Force Microscope (AFM). It turned out that the quality of the ITO pattern fabricated by a shaped beam is superior to that of the pattern without beam shaping in terms of debris generation, height of the craters, and homogeneity of the bottom. Optimum processing window was determined at the laser irradiance exhibiting 100% removal of Sn. The removal rate of In was measured to be 83%.

• Radiation Oncology Journal
• /
• 제11권2호
• /
• pp.431-437
• /
• 1993

방사선 수술에 있어서 선량 형태를 변형시키기 위한 조사변수들의 선택은 중요한 문제이다. 선형가속기를 이용한 뇌정위적 방사선 수술은 통상 원형 조사면과 다중 arc를 이용하여 구형 형태의 선량을 얻는 방법을 이용하고 있다. 그러나, 병소가 임의의 형태인 경우 구형의 선량으로서는 병소 이외에 정상조직도 많은 선량이 가해지게 된다. 현재 병소형태의 선량을 얻기 위한 방법으로 multiple isocenters를 이용하거나, 각 arc에 달리 weights를 주는 방법을 사용하고 있다. 본 논문에서는 병소의 beam's eye view를 이용하여 조사 위치에서 조사면을 shaping하는 새로운 방법에 대하여 논의하고자 한다. 이러한 conformal조사 방법은 병소와 정상조직의 가시적인 3차원 선량분포와 dose volume histogram의 분석 방법을 통하여 검증되었다. conformal 방법을 이용한 경우 multiple isocenter를 이용한 경우보다 적은 arc 수를 가지고도 상응하는 dose gradient와 더 나은 선량의 균질성을 얻을 수 있었다.