• 지역과문화
• /
• 제7권2호
• /
• pp.1-29
• /
• 2020

지역문화진흥법의 시행과 함께 문화매개 영역에 대한 관심이 증가하는 가운데, 본 연구자는 지역에서 독립적으로 활동해 온 문화매개자의 역할을 기술할 수 있는 이론적 논의와 사례 연구를 모색하였다. 이에 이 연구는 지역의 문화매개 활동을 지역과 문화를 둘러싼 능동적인 의미 생산 활동으로 의미화하고, 기존의 가치와 인식에 대해 대안적 의미를 생산하고 지역의 문화 공론장을 역동적으로 구성하는 데 기여하는 문화매개자 역할을 조명하는 데 그 목적을 두었다. 피에르 부르디외의 개념을 경유하여 지역을 둘러싼 의미 생산에 기여하는 문화매개자의 역할을 이론적으로 검토한 후, 지역과 문화의 매개가 기존의 중앙 집중화된 문화생산 구조에 대해 대안적 의미를 생산하고, 도시재생의 국면에서 지역의 구체성을 드러내는 로컬 기획이 문화 공론장을 역동적으로 구성하는 역할을 수행할 수 있다는 점을 논하였다. 구체적인 논의를 위해 인천에서 활동해 온 로컬 기획자(스페이스빔, 임시공간, 인천스펙타클)의 사례를 연구하였다. 연구 결과, 각각의 사례는 1) 주민들과 이슈를 공유하고 지역의 대안을 제시함으로써 삶의 환경을 변화시키는 역할 2) 지역의 전문예술 영역을 공적인 장으로 재구성하는 역할 3) 독립출판물을 통해 지역의 일상문화를 드러내고 네트워크를 형성하는 역할을 보여주었다. 이들은 각자의 영역과 관심 속에서 지역의 다양한 면모를 드러내는 과정을 통해 인천에서 문화를 둘러싼 공적 영역의 구성에 관여하고 있는 것으로 확인되었다. 이번 연구는 지역문화의 자율성과 다양성의 확보라는 과제를 둔 상황에서, 문화매개자의 역할을 지역에서 대안적 의미를 생산하는 활동주체로 의미화하고 각각의 매개 실천들의 특이성을 분석하고자 했다는 점에서 의미를 가진다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.732-737
• /
• 2005

Distal 3D Real Object Duplication System(RODS) consists of 3D Scanner and Solid Freeform Fabrication System(SFFS). It is a device to make three-dimensional objects directly from the drawing or the scanning data. In this research, we developed an office type SFFS based on Three Dimensional Printing Process and a industrial SFFS using Dual Laser. An office type SFFS applied sliding mode control with sliding perturbation observer(SMCSPO) algorithm for control of this system. And we measured process variables about droplet diameter measurement and powder bed formation etc. through experiments. Also, in order to develop more elaborate and speedy system for large objects than existing SLS process, this study applies a new Selective Multi-Laser Sintering(SMLS) process and 3-axis dynamic Focusing Scanner for scanning large area instead of the existing $f\theta$ lens. In this process, the temperature has a great influence on sintering of the polymer. Also the laser parameters are considered like that laser beam power, scan speed, scan spacing. Now, this study is in progress to eveluate the effect of experimental parameters on the sintering process.

• 천문학회보
• /
• 제40권1호
• /
• pp.53.2-53.2
• /
• 2015

Fiber Bragg gratings (FBGs) are the most compact and reliable method of suppressing atmospheric emission lines in the infrared for ground-based telescopes. It has been proved that real FBGs based filters were able to eliminate 63 bright sky lines with minimal interline losses in 2011 (GNOSIS). Inscribing FBGs on multi-core fibers offers advantages. Compared to arrays of individual SMFs, the multi-core fiber Bragg grating (MCFBG) is greatly reduced in size, resistant to damage, simple to fabricate, and easy to taper into a photonics lantern (PRAXIS). Multi-mode fibers should be used and the number of modes has to be large enough to capture a sufficient amount of light from the telescope. However, the fiber Bragg gratings can only be inscribed in the single-mode fiber. A photonic lantern bi-directionally converts multi-mode to single-mode. The number of cores in MCFBGs corresponds to the mode. For a writing system consisting of a single ultra-violet (UV) laser and phase mask, the standard writing method is insufficient to produce uniform MCFBGs due to the spatial variations of the field at each core within the fiber. Most significant technical challenges are consequences of the side-on illumination of the fiber. Firstly, the fiber cladding acts as a cylindrical lens, narrowing the incident beam as it passes through the air-cladding interface. Consequently, cores receive reduced or zero illumination, while the focusing induces variations in the power at those that are exposed. The second effect is the shadowing of the furthest cores by the cores nearest to the light source. Due to a higher refractive index of cores than the cladding, diffraction occurs at each core-cladding interface as well as cores absorb the light. As a result, any core that is located directly behind another in the beam path is underexposed or exposed to a distorted interference pattern from what phase mask originally generates. Technologies are discussed to overcome the problems and recent experimental results are presented as well as simulation results.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2003년도 제27회 추계학술대회
• /
• pp.71-71
• /
• 2003

The study on magnetic field combined radiation therapy, as a new technique to modify the dose distributions using external magnetic field, has been investigated. The goal of the study is to develop the techniques for dose localization, as a particle beam, from the strong magnetic fields. In this study, in order to study the principle of dose deposition in external fields, as a basic approach, we have calculated approximately the paths of traveling electrons in water under external magnetic fields with numerical methods. The calculations are performed for a primary particle by cumulating the steps which are defined as small path lengths which energy loss can be ignored. In this calculation, the energy loss and direction change for a step was calculated by using total stopping power and Lorentz force equation respectively. We have examined the deflected paths of the electron through water as a function of external magnetic field and incident electron s energy. Since we did not take account of the multiple scattering effects for electrons through water, there are errors in this calculation. However, from the results we can explain the principle of dose variation and dose focusing for electron beams under strong magnetic fields in water.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2005년도 추계 학술대회 논문집
• /
• pp.87-95
• /
• 2005

삼중수소를 사용하는 자발광유리관의 제조에 필요한 4가지 핵심 기술 중 레이저를 이용한 밀봉/절단기술을 개발하였다. 상용 제품을 분석한 결과 유리관의 재질은 pyrex 이었고 레이저는 유리가공에 적절한 펄스형 이산화탄소 레이저를 사용하였다 유리관의 밀봉/절단에 영향을 미치는 인자들로는 레이저빔의 강도 지속시간 조사 방법, 유리관 내부의 압력 등이었다. 전 공정은 2단계로 이루어져 1단계에서는 삼중수소를 주입하고 유리관의 양단을 밀봉하였으며 2단계에서는 삼중수소가 봉입된 유리관을 원하는 길이로 밀봉/절단하였다. 각 공정에서 유리관의 밀봉은 defocusing된 레이저빔을 사용하였으며 절단은 focusing된 빔을 사용하였다. 밀봉/절단 후에는 잔여 열응력에 의한 파열을 방지하기 위하여 열처리를 하였다.

• 한국위성정보통신학회논문지
• /
• 제11권3호
• /
• pp.133-137
• /
• 2016

실내 고속 데이터 전송을 목표로 하는 밀리미터파 무선통신 시스템은 고 품질의 무선 링크에 대한 요구 사항이 매우 중요하다. 그러나, 이러한 주파수 대역에서 전자기파는 상대적으로 작은 파장으로 인하여 발생하는 높은 전파 손실을 감수해야 한다. 이러한 상황에서 방사전력을 특정 방향으로 집중하여 링크 품질을 향상시킬 수 있는 빔포밍 기법은 밀리미터파 대역 무선통신에서 가장 중요한 기법 중의 하나가 되었다. 최근 몇 년간, 무선 시스템의 성능을 향상시키기 위한 빔포밍 관련 연구가 많이 이루어지고 있다. 본 논문에서는 다중절차와 3상 빔 선택을 기반으로 한 단순화된 코드북 기반의 빔포밍 기법의 성능을 평가한다. 이 단순화된 기법은 전수검색, IEEE 802.15.3c 표준이 적용된 2-레벨 검색 및 기존의 멀티레벨 기법과 비교하여 빔포밍 준비에 필요한 시간 감소를 달성할 수 있음을 보여준다.

• Journal of Korean Neurosurgical Society
• /
• 제57권5호
• /
• pp.315-322
• /
• 2015

Intracranial germ cell tumors (ICGCT) occur in 2-11% of children with brain tumors between 0-19 years of age. For treatment of germinoma, relatively low radiation doses with or without chemotherapy show excellent 10 year survival rate of 80-100%. Past studies showed that neoadjuvant chemotherapy combined with focal radiotherapy resulted in unacceptably high rates of periventricular tumor recurrence. The use of generous radiation volume which covers the whole ventricular space with later boost treatment to primary site is considered as standard treatment of intracranial germinomas. For non-germinomatous germ cell tumors (NGGCT), 10-year overall survival rate is still much inferior than that of intracranial germinoma despite intensive chemotherapy and high-dose radiotherapy. Craniospinal radiotherapy combined with cisplatin-based chemotherapy provides the best treatment outcome for NGGCT; 60-70% of overall survival rate. There is a debate on the surgical role whether surgery can contribute to improved treatment outcome of NGGCT when added to combined chemoradiotherapy. Because higher dose of radiotherapy is required for treatment of NGGCT than for germinoma, it is tested whether whole ventricular irradiation can replace craniospinal irradiation in intermediate risk group of NGGCT to minimize radiation-related late toxicity in the recent studies. To minimize the treatment-related neural deficit and late sequelae while maintaining long-term survival rate of ICGCT patients, optimized administration of chemotherapy and radiotherapy should be selected. Use of technically upgraded radiotherapy modalities such as intensity-modulated radiotherapy or proton beam therapy is expected to bring an improved neurocognitive outcome with longitudinal assessment of the patients.

• 대한방사선치료학회지
• /
• 제1권1호
• /
• pp.63-69
• /
• 1985

High energy electron beams took effect for tumor radio-therapy, however, had a lot of problems in clinical application because of various conversion factors and complication of physical reactions. Therefore, we had experimentally studied the important properties of high energy electron beams from the linear accelerator, LMR-13, installed in Yonsei Cancer Center. The results of experimental studies on the problems in the 8, 10, 12 Mev electron beam therapy were reported as following. 1. On the measurements of the outputs and absorbed does, the ionization type dosimeters that had calibrated by $^{90}Sr$ standard source were suitable as under $3\%$ errors for high energy electrons to measure, but measuring doses in small field sizes and the regions of rapid fall off dose with ionization chambers were difficult. 2. The electron energy were measured precisely with energy spectrometer consisted of magnet analyzer and tele-control detector and the practical electron energy was calculated under $5\%$ errors by maximum range of high energy electron beam in the water. 3. The correcting factors of perturbated dose distributions owing to radiation field, energy and material of the treatment cone were checked and described systematically and variation of dose distributions due to inhomogeneous tissues and sloping skin surfaces were completely compensated. 4. The electron beams, using the scatters; i.e., gold, tin, copper, lead, aluminium foils, were adequately diffused and minimizing the bremsstrahlung X-ray induced by the electron energy, irradiation field size and material of scatterers, respectively. 5. Inproving of the dose distribution from the methods of pendulum, slit, grid and focusing irradiations, the therapeutic capacity with limited electron energy could be extended.

• Journal of Radiation Protection and Research
• /
• 제3권1호
• /
• pp.6-22
• /
• 1978

High energy electron beams took effect for tumor radio-therapy, however, had a lot of problems in clinical application because of various conversion factors and complication of physical reactions. Therefor, we had experimentally studied the important properties of high energy electron beams from the linear accelerator, LMR-13, installed in Yonsei Cancer Center. The results of experimental studies on the problems in the 8, 10, 12 Mev electron beam therapy were reported as following. 1. On the measurements of the outputs and absorbed doses, the ionization type dosimeters that had calibrated by $^{90}Sr$ standard source were suitable as under 3% errors for high energy electrons to measure, but measuring doses in small field sizes and the regions of rapid fall off dose with ionization chambers were difficult. 2. The electron energy were measured precisely with energy spectrometer consisted of magnet analyzer and tele-control detector and the practical electron energy was calculated under 5% errors by maximum range of high energy electron beam in the water. 3. The correcting factors of perturbated dose distributions owing to radiation field, energy and material of the treatment cone were checked and described systematically and variation of dose distributions due to inhomogeneous tissues and sloping skin surfaces were completely compensated. 4. The electron beams, using the scatterers; ie., gold, tin, copper, lead, aluminium foils, were adequately diffused and minimizing the bremsstrahlung X-ray induced by the electron energy, irradiation field size and material of scatterers, respectively. 5. Inproving of the dose distribution from the methods of pendulum, slit, grid and focusing irradiations, the therapeutic capacity with limited electron energy could be extended.

• 한국광학회지
• /
• 제13권6호
• /
• pp.548-553
• /
• 2002

유도 브릴루앙 산란 위상공액 거울(SBS-PCM)을 이용한 Nd:YAG 레이저 발진기를 구성하고 특성을 조사하였다. SBS-PCM은 SBS-cell과 렌즈계의 조합으로 구성되어 있다. Q-switcher를 사용하지 않은 경우, SBS-cell이 SBS-PCM으로 작용하지 않은 것을 확인하였고, Cr:YAG(T=50%) Q-switcher가 사용된 경우는 SBS-cell이 SBS-PCM으로 작용하였다. 이 경우 에너지 출력특성은 SBS-PCM의 유무에 관계엾이 차이가 없으나, 출력의 빔프로파일은 크게 향상되었다. 이를 설명하기 위해 초평면에서의 세기에 따른 반사율차이를 이용한 간단한 공간주파수 여과모형을 제시하고 시뮬레이션 하였다.