• 한국광학회:학술대회논문집
• /
• 한국광학회 2009년도 동계학술발표회 논문집
• /
• pp.449-450
• /
• 2009

위그너 분포 함수 측정을 통하여 진행하는 laser beam의 상관함수와 진행 특성들을 연구하였다. 위그너 분포 함수는 진행하는 laser beam의 total degree of coherence, beam quality parameter, 그리고 근접장 및 원거리장의 정보들을 보여준다. 위그너 분포 함수를 이용하여 공간상관 함수와 방향상관 함수를 구할 수 있으며, 이를 Schmidt mode decomposition을 이용하여 분석하면 laser beam의 보다 여러가지 특성들을 분석 할 수 있다. 이렇게 분석된 eigenmode들은 진행하는 laser beam의 보다 정확한 coherence 특성을 이해하게 해준다.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권10호
• /
• pp.1327-1334
• /
• 1999

The stabilization control of ball-beam system is difficult because of its nonlinearity and structural unstability. Futhermore, a series of classical methods such as the PID and the full state feedback controller(FSFC) based on the local linearizations have narrow stabilizable regions. At the same time, the fine tunings of their gain parameters are also troublesome. Therefore, in this paper, three improved design techniques of stabilization controller for a ball-beam system were proposed. These parameter tuning methods in the double PID controller(DPIDC), the FSFC and the a sliding mode controller(SMC) were dependent upon the Real Value Elitist Genetic Algorithm (RVEGA). Finally, by applying the DPIDC, the FSFC and the Real Variable Elitist Genetic Algorithm based Sliding Mode Control(RVEGA SMC) to the stabilizations of a ball-beam system, the performances of the RVEGA SMC technique were showed to be superior to those of two other type controllers.

• Journal of Mechanical Science and Technology
• /
• 제20권8호
• /
• pp.1149-1158
• /
• 2006

In this paper, sliding mode control (SMC) is designed and applied to an elastic structure to suppress some of its vibration modes. The system is an elastic beam clamped on one end and the designed controller uses only the deflection measurement of the free end. The infinite dimensional mathematical model of the beam is reduced to an ordinary differential equation set to represent the behavior of required modes. Since the states of the finite dimensional model are not physically measurable quantities, an observer is designed to estimate these states by measuring the tip deflection of the beam. The performance of the observer is important because the observed states are used in the SMC design. In this study, by using the output information, an observer is designed and tested to estimate the states of the finite dimensional model of the beam. Then the designed SMC is applied to the experimental beam system which gives satisfactory suppressed vibrations.

• Current Optics and Photonics
• /
• 제3권1호
• /
• pp.22-26
• /
• 2019

A compact red-green-blue beam combiner (multiplexer) based on two-mode interference (TMI) is proposed and its feasibility is shown through three-dimensional beam propagation simulation. The first stage TMI beam combiner makes red (637 nm) and blue (446 nm) beams combined toward one output port and the second stage one combines red, blue, and green (532 nm) beams. The power transmission to the output port from the red, green, and blue input ports are 0.96, 0.99, and 0.98, respectively. When the wavelength deviation is 10 nm, the transmission is maintained to be larger than 0.9. The size of the combiner is as tiny as $0.02{\times}3.8mm^2$.

• 한국소음진동공학회논문집
• /
• 제22권3호
• /
• pp.223-233
• /
• 2012

This paper deals with free vibrations of the tapered Timoshenko beam with constant volume, in which both the rotatory inertia and shear deformation are included. The cross section of the tapered beam is chosen as the regular polygon cross section whose depth is varied with the parabolic function. The ordinary differential equations governing free vibrations of such beam are derived based on the Timoshenko beam theory by decomposing the displacements. Governing equations are solved for determining the natural frequencies corresponding with their mode shapes. In the numerical examples, three end constraints of the hinged-hinged, hinged-clamped and clamped-clamped ends are considered. The effects of various beam parameters on natural frequencies are extensively discussed. The mode shapes of both the deflections and stress resultants are presented, in which the composing rates due to bending rotation and shear deformation are determined.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.441-448
• /
• 2000

An investigation into the nonlinear free vibrations of a cantilever beam which can have not only planar motion but also nonplanar motion is made. Using Galerkin's method based on the first mode in each motion, we transform the boundary and initial value problem into an initial value problem of two-degree-of-freedom system. The system turns out to have two normal modes. By Synge's stability concept we examine the stability of each mode. In order to check validity of the stability we obtain the numerical Poincare map of the motions neighboring on each mode.

• 한국광학회지
• /
• 제2권1호
• /
• pp.20-25
• /
• 1991

홑 결모양 빛살이 도파되는 광섬유와 두 결모양 빛살이 도파되는 광섬유를 스러지는 들 결합(evanescent field coupling)을 써서 두 결모양 빛살($LP_{01}, LP_{11}$)이 도파되는 광섬유에서 $LP_{11}$ 결모양 빛살만 뽑아 내었다. 이 $LP_{11}$ 결모양 빛살이 도파되는 광섬유에 짝짓게 세 개를 제작해 두 개는 결합시켜 $LP_{11}$결모양 빛살 광섬유 공진고리 간섭계를 구성 하였다. 구성된 간섭계의 출력 광섬유의 짝짓게판과 프리즘 츨력 짝짓게를 결합시켜 광섬유로부터 방사 결모양 빛살을 뽑아 내어 도파되는 결모양수를 조사하였다. 외부 섭동이 간섭계 고리에 가해질 때 프리즘 출력 짝짓게에서 나온 방사 결모양 빛살의 변화와 출력끝에서 나온 방사 빛살모양의 변화를 조사하였다. $LP_{11}$ 결모양 빛살의 edit 두 반구에 광 다이오우드 2개를 놓아 빛살을 받아 오실로스코우프에 입력시켜 Lissajous 모양을 만들어 그 궤도에서 돌아가는 방향으로 위상변화의 증가 혹은 감소되는 방향을 알 수 있다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.392-393
• /
• 2009

The study is aimed at studying a weakly relativistic oversized BWO with a Bragg reflector entrance of SWS. The Bragg reflector reflects microwaves, while it is open for beam propagations. By changing the boundary condition at the beam entrance, the effect of the Bragg reflector on the BWO performance is examined.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 춘계학술대회 논문집
• /
• pp.13-17
• /
• 1993

Analytical models for the prediction of the size of hardened zone in laser surface hardening are presented. The models are based on the solutions to the problem of three-dimensional heat flow in plates with infinite thickness. The validity of the model was tested on medium carbon steel for Gaaussian mode of beam. Then the model for rectangular beam was used for the prediction of the size of harened zone on various hardening process parameters. From the calculation results it appeared that the size and shape of the hardened zone are strongly dependent on process parameters suchas beam mode, beam size, and traverse speed.

• 한국광학회지
• /
• 제18권4호
• /
• pp.280-285
• /
• 2007

다중모드 광섬유 테이퍼(taper)를 이용하여 레이저와 광섬유 혹은 두 개의 서로 다른 광섬유 사이의 효과적인 광결합을 위한 모드 크기 변환기를 제안하고 구현하였다. 이 소자의 입력 단은 다중 모드 구조이고 출력단은 단일 모드 구조이다. 소자의 구조 및 광원과 소자사이의 결합 조건이 결합 효율에 미치는 영향을 이론적으로 분석하였다. 이론적 결과는 제안된 소자가 가우시안 빔을 단일모드 광섬유로 거의 손실 없이 결합할 수 있는 것을 보였다. 제안된 소자를 두 개의 마이크로 토치가 부착된 장비를 이용해 제작하였다. 실험 결과 제작된 다중모드광섬유 테이퍼를 통해 $50\;{\mu}m$ 빔 크기를 가지는 가우시안 빔을 단일모드 광섬유로 효과적으로 결합할 수 있는 것을 보였다. 소자의 삽입 손실은 1.3 dB였다.