• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.4
• /
• pp.561-568
• /
• 2010

Instrumentation radar in a test range has an important role to measure target's TSPI(time, space, position, information). It is well known that it tracks a target stably using a beacon mode. But it may fail to track a target in a certain region using a beacon mode. In this paper, we modeled a simple missile shape similar to ATCMS with two beacon antenna and analyzed an antenna radiation pattern using MLFMM(Multi Level Fast Multipole Method) method. Using the analyzed result of the radiation pattern of the antenna and the attitude data of target, we simulated beacon tracking performance of an instrumentation radar. As a result of simulation, we showed that an instrumentation radar may lose the target because it tracks a area of the beacon antenna pattern.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.21 no.1
• /
• pp.23-29
• /
• 2013

This paper presents a tracking filter of radar beacon system (RBS) for automatic takeoff and landing of an unmanned aerial vehicle. The proposed tracking filter is designed as the decoupled tracking filter to reduce the computational burden. Also, an adaptive estimation method of the measurement error covariance is proposed to provide an improved tracking performance compared to the conventional decoupled tracking filter whenever the accuracy of RBS observations is degraded. 100 times Monte Carlo runs performed to analyze the performance of the proposed tracking filter in case of normal operation and degraded operations, respectively. The simulation results show that the proposed tracking filter provides the improved tracking accuracy in comparison with the conventional decoupled tracking filter.

• Journal of IKEEE
• /
• v.24 no.4
• /
• pp.1017-1021
• /
• 2020

In the V2X communications, each vehicle periodically broadcasts a message, called a beacon, so that its neighbor vehicles can accurately predict the near-future positions of the sending vehicle. In particular, the mobility-adaptive beacon broadcast (MAB2) scheme keeps the tracking error of a sending vehicle below a fixed threshold within a few consecutive beacon losses. In this paper, we present a random-early beacon broadcast (REB2) scheme that addresses the beacon aging problem of the MAB2 scheme. The simulation results show that, for a neighbor vehicle within 100 m distance, the tracking failure probability of REB2 scheme can be reduced to less than 1/10 of that of MAB2 scheme.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.1
• /
• pp.9-16
• /
• 2016

Since most of devices in the IEEE 802.15.4 LR-WPAN are expected to operate on batteries, they must be designed to consume energy in a very conservative way. Two energy conservation algorithms are proposed for the LR-WPAN: DDC (Dynamic Duty Cycle) and DBT (Dynamic Beacon Tracking). The DDC algorithm adjusts duty cycle dynamically depending on channel conditions. The DBT algorithm switches beacon tracking mode on and off adaptively depending on traffic conditions. Combining the two algorithms reduces energy consumption more efficiently for a wide range of input loads, while maintaining frame delivery ratio and average delay at satisfactory levels.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.2
• /
• pp.157-162
• /
• 2018

Tracking the location of patients in medical facilities is important to guarantee the patients' safety and to improve the service quality. Previous studies related to location tracking systems based on Bluetooth communication need numerous prerequisite information and multiple devices to improve the accuracy. In this paper, we propose a beacon-based space partition scheme that assigns different arrangement patterns of beacons to different spaces and composes groups with the similar value of RSSI to minimize prerequisite information and the number of beacons. The proposed scheme considers a pattern arrangement scheme to minimize intereference between neighbor patterns. We also verified the applicability of our scheme to monitor the patient location by using experimental results.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.2
• /
• pp.1162-1179
• /
• 2017

In this paper, we propose indoor location tracking method using RSSI(Received Signal Strength Indicator) value received from BLE(Bluetooth Low Energy) beacon. Due to the influence of various external environmental factors, it is very difficult to improve the accuracy in indoor location tracking. In order to solve this problem, we propose a novel method of reducing the noise generated in the external environment by using a double Gaussian filter. In addition, the value of the RSSI signal generated in the BLE beacon is different for each device. In this study, we propose a method to allocate additional weights in order to compensate the intensity of signal generated in each device. This makes it possible to improve the accuracy of indoor location tracking using beacons. The experiment results show that the proposed method effectively decrease the RSSI deviation and increase location accuracy. In order to verify the usefulness of this study, we compared the Kalman filter algorithm which is widely used in signal processing. We further performed additional experiments for application area for indoor location service and find that the proposed scheme is useful for BLE-based indoor location service.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.6
• /
• pp.608-614
• /
• 2008

This paper describes a location tracking system to guide landing process of an Unmanned Helicopter(UMH) exploiting MIT Cricket nodes. For automatic landing of a UMH, a precise positioning system is indispensable. However, GPS(Global Positioning System) is inadequate for tracking the three dimensional position of a UMH because of large positioning errors. The Cricket systems use Time-Difference-of-Arrival(TDoA) method with ultrasonic and RF(Radio Frequency) signals to measure distances. They operate in passive mode in that a listener attached to a moving device receives distance signals from several beacons located at fixed points on ground. Inevitably, this passive type of implementation causes large disturbances in measuring distances between beacons and the listener due to wind blow from propeller and turbulence of UMH body. To cope with this problem, we proposed active type of implementation for positioning a UMH. In this implementation, a beacon is set up at UMH body and four listeners are located at ground area at least where the UMH will land. A pair of Ultrasonic and RF signals from the beacon arrives at several listeners to calculate the position of the UMH. The distance signals among listeners are synchronized with a counter value appended to each distance signals from the beacon.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10d
• /
• pp.625-630
• /
• 2006

Zigbee 센서 네트워크에서는 multihop 전송을 위하여 tree topology와 beacon-enabled 네트워크 구성을 갖는다. 이러한 multihop beaconing 네트워크의 목적은 routing 노드들에게 Sleep할 기회를 주어 파워의 소모를 줄이고자 하는 데 있다. 파워의 소모를 줄이고 beacon 전송시의 충돌을 방지하기 위하여 beacon 전송 스케줄링이 필요한데 본 논문은 multihop을 지원하고 에너지 효율에 효과적인 beacon 전송 스케줄링 알고리즘과 이를 바탕으로 에너지 효율적인 라우팅 기법을 제안한다. 본 제안은 Zigbee coordinator의 beacon interval(BI)이 결정되면 네트워크 내의 beacon을 전송하는 모든 노드들은 Zigbee coordinator의 BI를 알고 모든 노드의 superframe duration(SD)은 동일하다고 가정한다. 이러한 가정하에서 beacon을 전송하는 노드들이 Zigbee coordinator의 BI 구간 중 항상 정해진 시간에 자신의 beacon을 전송한다면 beacon의 충돌을 막을 수 있음을 보여 준다. 또한 노드들이 서로의 beacon 전송 시간을 알 수 있기 때문에 목적지 노드의 beacon을 tracking하지 않고도 목적지 노드가 active 되는 시점에 패킷을 전송하면 에너지 측면에서 좀 더 효율적인 라우팅 기반을 제공한다는 것을 보여 준다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.4
• /
• pp.341-348
• /
• 2013

A location estimation algorithm based on the sea-surface beacon is proposed in this paper. The beacon is utilized to provide ultrasonic signals to the underwater vehicles around the beacon to estimate precise position of underwater vehicles (ROV, AUV, Diver robot), which is named as USBL (Ultra Short Baseline) system. It utilizes GPS and INS data for estimating its position and adopts DWT (Discrete Wavelet Transform) de-noising filter and UKF (Unscented KALMAN Filter) elaborating the position estimation. The beacon system aims at estimating the precise position of underwater vehicle by using USBL to receive the tracking signals. The most important one for the precise position estimation of underwater vehicle is estimating the position of the beacon system precisely. Since the beacon is on the sea-waves, the received GPS signals are noisy and unstable most of times. Therefore, the INS data (gyroscope sensor, accelerometer, magnetic compass) are obtained at the beacon on the sea-surface to compensate for the inaccuracy of the GPS data. The noises in the acceleration data from INS data are reduced by using DWT de-noising filter in this research. Finally the UKF localization system is proposed in this paper and the system performance is verified by real experiments.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.5
• /
• pp.582-589
• /
• 2016

Multi-mode monopulse system is widely used for satellite terminal like UAV because of high tracking accuracy and low size/weight profile. In order to calculate tracking error, Multi-mode monopulse system utilizes high-order mode signal, and it should have enough C/N(carrier to noise) level therefore tracking system needs narrow band filtering of received satellite beacon signal as much as possible. However, UAV suffers for beacon frequency drift derived from Doppler effect due to satellite figure 8 movement and UAV maneuvering. Therefore wideband signal processing needs to be considered in advance for exact doppler compensation and consequent time delay. In this paper, we propose the multi-stage Digital Signal processing system for beacon signal, which could minimize the signal delay under high Doppler and low C/N condition.