• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.3
• /
• pp.363-370
• /
• 2016

This paper proposes a Ku-band multi-mode coupler and its monopulse tracking system, which can be applied to a unmaned aircraft vehicle(UAV) platform. In general, the carrier-to-noise(C/N) level of the beacon signal from a Ku-band commercial satellite is relatively weak compared to that of a military satellite because the Ku-band satellite has been designed for commercial services. Therefore, this paper proposes a coupler and its multi-mode monopulse tracking system satisfying the tracking accuracy under a low C/N environment and analyzes the tracking accuracy. After that, we perform a real satellite tracking test and compare the accuracy of the test with the analysis result before validating the performance of the architecture of the proposed satellite tracking system.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.5
• /
• pp.38-48
• /
• 2007

In ubiquitous environment, sensor networks that sense and transmit surrounding data without human intervention will become more important. If sensors are installed for detecting vehicles and measuring their speed in the road and that real-time information is given to drivers, it will be very effective for enhancing safety and controlling traffic in the road. In this paper, we proposed a new reliable and real-time sensor MAC protocol between AP and sensor nodes in order to provide real-time traffic flow information based on ubiquitous sensor networks. The proposed MAC allocates one TDMA slot for each sensor node on the IEEE 802.15.4 based channel structure, introduces relayed communication for distant sensors, and adopts a frame structure that supports retransmission for the case of errors. In addition, the proposed MAC synchronizes with AP by using beacon and adopts a hybrid tracking mode that supports economic power consumption according to various traffic situations, We implemented a simulator for the proposed MAC by using sim++ and evaluated various performances. The simulation results show that the proposed MAC reduces the power consumption and reveals excellent performance in real-time application systems.

• Journal of Korea Multimedia Society
• /
• v.25 no.2
• /
• pp.280-286
• /
• 2022

In order to efficiently collect data, it is essential to locate the facilities and analyze the movement data. The current technology for location collection can collect data using a GPS sensor, but GPS has a strong straightness and low diffraction and reflectance, making it difficult for indoor positioning. In the case of indoor positioning, the location is determined by using wireless network technologies such as Wifi, but there is a problem with low accuracy as the error range reaches 20 to 30 m. In this paper, using BLE 4.2 built in Raspberry Pi, we implement Bluetooth Smart Ready. In detail, a beacon was produced for Advertise, and an experiment was conducted to support the serial port for data transmission/reception. In addition, advertise mode and connection mode were implemented at the same time, and a 3-count gradual algorithm and a quadrangular positioning algorithm were implemented for Bluetooth RSSI error correction. As a result of the experiment, the average error was improved compared to the first correction, and the error rate was also improved compared to before the correction, confirming that the error rate for position measurement was significantly improved.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.4
• /
• pp.247-256
• /
• 2013

According to the complete standard document for PHY/MAC layer of visible light communication through the IEEE 802.15.7 WG on Sept. 2011, visible light communication lays a good foundation for developing a variety of application services. Thus, visible light communication moves to the advanced research period for developing application services, but most of applications are limited only to PtP service model. However, PtMP communication environment for VLC is required to accommodate more various applications. In this paper, we analyze an effect of key parameters on network performance in the star topology based visible personal area network system. We implement a simulator with considering attributes of PHY and MAC layer which are defined by IEEE 802.15.7 standard documents, and analyze the VLC performance.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.4
• /
• pp.436-440
• /
• 2008

In IEEE 802.15.4 beacon-enabled mode, performance decreases as the number of devices competing in the contention access period(CAP) increases. In this letter, we propose partitioned contention access mechanism(PCAM) to compensate performance degradation. In PCAM, the PAN coordinator divides CAP into two sub-periods and activity of devices is delimited in their assigned sub-periods. Since PCAM reduces the number of devices which compete at the same time by half, collision probability between transmitted frames can be reduced. In addition, devices can save their power consumption because PCAM shorten the duration that devices stay in active state into half. We perform simulations to compare the performance of PCAM with that of the IEEE 802.15.4 standard. From the result, PCAM yields better performance than IEEE 802.15.4 standard.

• Journal of Advanced Navigation Technology
• /
• v.8 no.2
• /
• pp.98-104
• /
• 2004

When a straight-in landing from an instrument approach using ILS or VOR/DME is not possible or desirable because of topographical reason or bad weather, a circling approach maneuver is initiated by the pilot to align the aircraft with a runway for landing. Visual contact with the runway is necessary while conducting a circle to land maneuver. This research is to develop a new warning system based on a convention marker system which alerts pilots to watch out for exceeding the circling approach area. The airborne system also uses the same receiver unit without any new installations. The objective of this research is to design and develop a Yagi antenna in a special form. The research includes computer simulations to determine the size of antenna radiation pattern and to compute an expected flight path in case of alarm to validate effectiveness of the system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.5
• /
• pp.1108-1130
• /
• 2013

Wireless Body Area Networks (WBANs) are becoming increasingly important to solve the issue of health care. IEEE 802.15.6 is a wireless communication standard for WBANs, aiming to provide a real-time and continuous monitoring. In this paper, we present our development of a modified Markov Chain model and a backoff model, in which most features such as user priorities, contention windows, modulation and coding schemes (MCSs), and frozen states are taken into account. Then we calculate the normalized throughput and average access delay of IEEE 802.15.6 networks under saturation and ideal channel conditions. We make an evaluation of network performances by comparing with IEEE 802.15.4 and the results validate that IEEE 802.15.6 networks can provide high quality of service (QoS) for nodes with high priorities.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.04a
• /
• pp.163-165
• /
• 2002

현재 가장 중요하고 대중적인 통신수단으로 인식되고 있는 인터넷은 VoIP 기술을 이용하여 전화통신을 지원할 수 있게 되었다 VoIP 기술의 두드러진 장점은 기존의 인터넷망에 대해 추가적인 수정없이 음성전화 서비스를 통합함으로써 회선비용을 크게 절감하고, 단말의 이동성을 지원한다는 것이다. 이러한 장점으로 인해 VoIP는 향후의 네트워터에서 핵심 요소로 그 중요성이 점차 증가하고 있다. 본 논문에서는 다양한 VoIP 기술들 중 프로토콜 자체에 개인 이동성 지원이 명시되어 있고, 효과적인 이동호스트의 지원이 가능만 SIP을 기반으로 하여 단말이 이동중에 수신하는 beacon 신호의 감도와 빈도를 저장하여 예상 핸드오버 셀을 결정하는 SS buffer 메커니즘과 SIP server를 이용하여 계층적 이동성을 처리하는 hybrid mode를 갖춘 이동성지원 기법을 제안한다.

• Journal of information and communication convergence engineering
• /
• v.6 no.3
• /
• pp.343-347
• /
• 2008

Wakeup schemes that turn off sensors' radio when communication is not necessary have great potential in energy saving. At the start of each beacon interval in the IEEE 802.11 power saving mode specified for DCF, each node periodically wakes up for duration called the ATIM Window. However, in the power saving mechanism specified in IEEE 802.11, all nodes use the same ATIM window size. Since the ATIM window size critically affects throughput and energy consumption, a fixed ATIM window does not perform well in all situations. This paper proposes an adaptive mechanism to dynamically choose an ATIM window size according to network condition. Simulation results show that the proposed scheme outperforms the IEEE 802.11 power saving mechanism in terms of the amount of power consumed and the packet delivery ratio.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.3C
• /
• pp.224-232
• /
• 2012

Priority MAC is an important issue in every communication system when we consider differentiated service applications. In this paper, we propose a mechanism to support priority MAC based on multi-parameters for IEEE 802.15.7 visible light communication (VLC). By using three parameters such as number of backoff times (NB), backoff exponent (BE) and contention window (CW), we provide priority for multi-level differentiated service applications. We consider beacon-enabled VLC personal area network (VPAN) mode with slotted version for random access algorithm in this paper. Based on a discrete-time Markov chain, we analyze the performance of proposed mechanism under non-saturation environments. By building a Markov chain model for multi-parameters, this paper presents the throughput and transmission delay time for VLC system. Numerical results show that we can apply three parameters to control the priority for VLC MAC protocol.