• Title/Summary/Keyword: BeO

검색결과 23,375건 처리시간 0.051초

졸겔 합성에 의한 LiFeO2분말의 Mossbauer 연구 (Mossbauer studies of LiFeO2 powders by sol-gel process)

  • 안성용;김철성
    • 한국자기학회지
    • /
    • 제14권2호
    • /
    • pp.71-75
    • /
    • 2004
  • $\alpha$-LiFe $O_2$ 분말을 졸겔법을 이용하여 제조하였다. 결정학적 및 자기적 성질을 x-선 회절분석기, Mossbauer 분광기 및 진동형시료자화율측정기를 이용하여 연구하였다. $600^{\circ}C$에서 3시간 동안 공기 중에서 열처리하여 제조한 시료는 $\alpha$-LiFe $O_2$+LiFe $O_{8}$의 혼상으로 이루어졌으며 $600^{\circ}C$에서 3시간 동안 $H_2$(5%)/Ar(Bal.)혼합가스 분위기에서 열처리 한 시료는 $\alpha$-LiFe $O_2$ 상임을 확인할 수 있었다. X-선 회절분석 결과 $\alpha$-LiFe $O_2$ 분말은 cubic구조를 가졌으며 이때 격자상수 a=4.1930$\pm$0.0005 $\AA$이었다 Mossbauer 스펙트럼 분석결과 $\alpha$-LiFe $O_2$의 Neel온도는 130$\pm$3K임을 알 수 있었다.

SIMS를 이용한 SiO2/PSG/SiO2/Al-1%Si 적층 박막내의 K 게터링 분석 (Analysis of the K Gettering in SiO2/PSG/SiO2/Al-1%Si Multilevel Thin Films using SIMS)

  • 김진영
    • 한국표면공학회지
    • /
    • 제50권3호
    • /
    • pp.219-224
    • /
    • 2017
  • The K gettering in $SiO_2/PSG/SiO_2/Al-1%Si$ multilevel thin films was investigated using SIMS(secondary ion mass spectrometry) and XPS(X-ray Photoelectron Spectroscopy) analysis. DC magnetron sputter techniques and APCVD(atmosphere pressure chemical vapor deposition) were utilized for the deposition of Al-1%Si thin films and $SiO_2/PSG/SiO_2$ passivations, respectively. Heat treatment was carried out at $400^{\circ}C$ for 5 h in air. SIMS depth profiling was used to determine the distribution of K, Al, Si, P and other elements throughout the $SiO_2/PSG/SiO_2/Al-1%Si$ multilevel thin films. XPS was used to analyze binding energies of Si and P elements in PSG passivation layers. K peaks were observed throughout the $PSG/SiO_2$ passivation layers on the Al-1%Si thin films and especially at the $PSG/SiO_2$ interfaces. K gettering in $SiO_2/PSG/SiO_2/Al-1%Si$ multilevel thin films is considered to be caused by a segregation type of gettering. The chemical state of Si and P elements in PSG passivation appears to be $SiO_2$ and $P_2O_5$, respectively

자동차용 PTC써미스터 조성개발에 관한 연구 (Development of PTCR compositions for automobile)

  • 김복희;문지원;전형탁;최연규;손명성;김기주
    • 한국결정성장학회지
    • /
    • 제8권1호
    • /
    • pp.151-159
    • /
    • 1998
  • 자동차 모터 작동시에 사용되는 전류 제어 소자의 써미스터 조성을 개발하기 위하여 $BaTiO_3$에 첨가제로써 $Y_{2}O_{3}CaO,SiO_{2}$ 및 Mn을 선정하여 실험하였다. 0.2mol%의 $Y_{2}O_3$, 첨가에서 가장 낮은 상온 저항 16.5${\Omega}{\cdot}$cm를, 1.6mol% $SiO_2$ 첨가에서 50${\Omega}{\cdot}$cm를 보였다. 5mol%의 Ca를 Ba와 치환한 조성에서는 결정립의 크기가 34.95${\mu}$m에서 13.4${\mu}$m로 감소하였으며, 0.04mol% Mn에서 상온저항 및 ${\rho}_{max}/{\rho}_{min}$가 각각 30~40${\Omega}{\cdot}$cm, $1.5{\times}10^5$의 우수한 특성을 나타내었다.

  • PDF

수열합성법을 이용한 ZnO 나노로드의 제조 및 이산화질소 감응 특성 (Preparation of ZnO nanorods by hydrothermal method and their $NO_2$ sensing characteristics)

  • 조평석;김기원;이종흔
    • 한국진공학회지
    • /
    • 제15권5호
    • /
    • pp.506-511
    • /
    • 2006
  • $Zn(NO_3)_2{\cdot}6H_2O$, 수산화나트륨, cyclohexylamine, 에탄올, 물이 혼합된 용액을 수열합성하여 ZnO 나노로드를 합성하고, 합성한 물질의 이산화 질소$(NO_2)$와 일산화 탄소(CO)에 대한 감응특성을 조사하였다. 혼합 용액에 첨가되는 물의 양을 변화시켜 ZnO 나노로드의 형상과 응집현상을 조절할 수 있었다. 이는 물과 cyclohexylamine의 반응에 의해 발생되는 $OH^-$ 이온의 농도변화에 의한 것으로 해석된다. 물의 함량이 낮을 때에는 뭉쳐진 성게모양의 ZnO 나노로드를, 물의 함량이 많을 때에는 잘 분산된 ZnO 나노로드를 각각 합성할 수 있었다. 잘 분산된ZnO 나노로드는 공기 중에서 50 ppm 의 CO에 노출되었을 때 주목할 만한 반응을 보이지 않는 반면, 1 ppm 의 $NO_2$에 노출되었을 때에는 저항이 1.8배 증가하였다. 이러한 선택적 반응을 보이는 ZnO 나노로드는 자동차용 자동환기 시스템의 핵심부품인 매연센서의 감응물질로 사용될 수 있다.

Growth and characterization of periodically polarity-inverted ZnO structures grown on Cr-compound buffer layers

  • Park, J.S.;Goto, T.;Hong, S.K.;Chang, J.H.;Yoon, E.;Yao, T.
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2010년도 제39회 하계학술대회 초록집
    • /
    • pp.259-259
    • /
    • 2010
  • Periodically polarity inverted (PPI) ZnO structures on (0001) Al2O3 substrates are demonstrated by plasmas assisted molecular beam epitaxy. The patterning and re-growth methods are used to realize the PPI ZnO by employing the polarity controlling method. For the in-situ polarity controlling of ZnO films, Cr-compound buffer layers are used.[1, 2] The region with the CrN intermediate layer and the region with the Cr2O3 and Al2O3 substrate were used to grow the Zn- and O-polar ZnO films, respectively. The growth behaviors with anisotropic properties of PPI ZnO heterostructures are investigated. The periodical polarity inversion is evaluated by contrast images of piezo-response microscopy. Structural and optical interface properties of PPI ZnO are investigated by the transmission electron microcopy (TEM) and micro photoluminescence ($\mu$-PL). The inversion domain boundaries (IDBs) between the Zn and the O-polar ZnO regions were clearly observed by TEM. Moreover, the investigation of spatially resolved local photoluminescence characteristics of PPI ZnO revealed stronger excitonic emission at the interfacial region with the IDBs compared to the Zn-polar or the O-polar ZnO region. The possible mechanisms will be discussed with the consideration of the atomic configuration, carrier life time, and geometrical effects. The successful realization of PPI structures with nanometer scale period indicates the possibility for the application to the photonic band-gap structures or waveguide fabrication. The details of application and results will be discussed.

  • PDF

Flexible 3D ZnO/Polymer Composite by Simple-Step Growth Processing for Highly Photocatalytic Performance

  • Lee, Hyun Uk;Park, So Young;Seo, Jung Hye;Son, Byoungchul;Lee, Jouhahn
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
    • /
    • pp.412-412
    • /
    • 2014
  • Zinc oxide (ZnO) is one of the most powerful materials for purifying organic pollutants using photocatalytic activity. In this study, we have introduced a novel method to design highly photoreactive flexible 3 dimensional (3D) ZnO nanocomposite [F-ZnO-m (m: reaction time, min)] by electrospinning and simple-step ZnO growth processing (one-step ZnO seed coating/growth processing). Significantly, the F-ZnO-m could be a new platform (or candidate) as a photocatalytic technology for both morphology control and large-area production. The highest photocatalytic degradation rate ([k]) was observed for F-ZnO-m at 2.552 h-1, which was 8.1 times higher than that of ZnO nanoparticles (NPs; [k] = 0.316 h-1). The enhanced photocatalytic activity of F-ZnO-m may be attributed to factors such as large surface area. The F-ZnO-m is highly recyclable and retained 98.6% of the initial decolorization rate after fifteen cycles. Interestingly, the F-ZnO-m samples show very strong antibacterial properties against both Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus) after exposure to UV-light for 30 min. The antibacterial properties of F-ZnO-m samples are more effective than those of ZnO NPs. More than 96.6% of the E. coli is sterilized after ten cycles. These results indicate that F-ZnO-m samples might have utility in several promising applications such as highly efficient water/air treatment and inactivation of pathogenic microorganisms.

  • PDF

Pt 및 $SnO_2$ 촉매하에서의 일산화탄소의 산화반응 (Catalytic Oxidation of Carbon Monoxide on Pt and $SnO_2$)

  • 주광렬;김하석;부봉현
    • 대한화학회지
    • /
    • 제24권3호
    • /
    • pp.183-192
    • /
    • 1980
  • $SnO_2$, Sb-doped $SnO_2$>, 그리고 백금촉매하에서 일산화탄소의 산화반응을 연구하였다. $SnO_2$ 및 Sb-doped $SnO_2$ 촉매하에서 산화반응은 CO 및 $O_2$에 대해서 각각 1차, 백금 촉매하에서는 1/2차 반응에 따랐다. $SnO_2$에 소량의 Sb첨가(dopant composition : 0.05∼0.1mole%)는 반응속도를 증가시키고 그 이상의 첨가는 오히려 반응속도를 감소시켰다. 백금 촉매하의 산화반응에서는 일산화탄소의 농도가 증가함에 따라 반응속도가 오히려 감소하는 억제효과를 보여주었다. 각 촉매하에서 산화반응의 활성화에너지는 Sb-dopoped $SnO_2$ 촉매 (dopant compisito : 0.05 mole%)에서 5.7 kcal, 백금 촉매에서 6.4 kcal이었다. 실험적으로 얻은 반응차수와 doping 효과로부터 가능한 반응메카니즘을 제안하였다.

  • PDF

이소부탄의 산화탈수소반응에 대한 여러 담지체에 따른 V-Sb 산화물 촉매 성능 효과 (Effect of Various Supports on the Catalytic Performance of V-Sb Oxides in the Oxidative Dehydrogenation of sobutane)

  • Shamilov, N.T.;Vislovskiy, V.P.
    • 대한화학회지
    • /
    • 제55권1호
    • /
    • pp.81-85
    • /
    • 2011
  • 이소부탄의 산화탈수소반응(ODH)에 대한 $V_{0.9}Sb_{0.1}O_x$ 촉매계의 5가지 담지체의 촉진효과를 조사하였다. 사용된 5가지 담지체는 감마-알루미나, 알파-알루미나, 실리카-알루미나, 실리카겔, 마그네슘 산화물이다. 촉매는 사용된 담지체에 따라 그 효과가 다르게 나타났다: ${\gamma}-Al_2O_3$ > $\alpha$-$Al_2O_3$ > Si-Al-O> $SiO_2$ $\approx$MgO$\gg$unsupported. V-Sb-O 비율은 별로 촉매 활성과 선택성에 영향을 미치지 않았다. 촉매 성분들이 담지체에 골고루 잘 분포된 이유로 인해 감마-알루미나에 담지된 $V_{0.9}Sb_{0.1}O_x$ 촉매계가 성능이 제일 뛰어났다.

부산 북항 O-2 정박지의 운영개선 방안 (Improvement Plan on Operation of O-2 Anchorage at the Busan North Port)

  • 송계의
    • 한국항만경제학회지
    • /
    • 제25권1호
    • /
    • pp.29-46
    • /
    • 2009
  • 전문가 및 항만관련기관에서도 57%가 동의하고 있고, 북빈대체부두 물양장 건설로 인해 물양장에 입출항하는 선박의 통항로를 확보하여 주기 위해, 동삼안벽 전면 수역 쪽의 O-2 정박지 220m 정도를 축소 폐지하는 것이 요구된다. 이것은 결국 북빈대체부두 물양장을 통항하는 소형선 때문에 O-2 정박지 주변의 통항 혼잡과 통항안전위험의 증가를 초래할 것이다. 따라서 북항 내 정박지 중 최대의 이용률(70% 이상)을 보이고 있는 O-2 정박지의 원래의 수용규모를 유지하고, 중앙부두 정박지의 폐쇄와 북항내 증가하고 있는 수요를 수용하기 위해 내항 방파제 전면 수역 쪽으로 250m 정도를 확대하여야 한다. 이와 같이 O-2 정박지를 축소 및 확대하여 운영하는데 따르는 자연환경, 수심, 주변 안벽 접안선박 통항지장여부, 북항 주항로 통항선박과의 안전성 문제는 발생하지 않는 것으로 판단된다. 결론적으로 O-2 정박지를 축소 및 확대하여 운영하는 것은 O-2 정박지 주변의 통항혼잡을 줄이고, 통항안전성을 높이는 결과를 초래할 것이고, 더 나아가 O-2 정박지의 운영 효율성을 높일 것이다.

  • PDF

Highly Photocatalytic Performance of flexible 3 Dimensional (3D) ZnO nanocomposite

  • Lee, Hyun Uk;Seo, Jung Hye;Son, Byoungchul;Kim, Hyeran;Yun, Hyung Joong;Jeon, Cheolho;Lee, Jouhahn
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
    • /
    • pp.270.1-270.1
    • /
    • 2013
  • Zinc oxide (ZnO) is one of the most powerful materials for purifying organic pollutants using photocatalytic activity. In this study, we have introduced a novel method to design highly photoreactive flexible 3 dimensional (3D) ZnO nanocomposite [F-ZnO-m (m: reaction time, min)] by electrospinning and simple-step ZnO growth processing (one-step ZnO seed coating/growth processing). Significantly, the F-ZnO-m could be a new platform (or candidate) as a photocatalytic technology for both morphology control and largearea production. The highest photocatalytic degradation rate ([k]) was observed for F-ZnO-m at 2.552 h-1, which was 8.1 times higher than that of ZnO nanoparticles (NPs; [k] = 0.316 h-1). The enhanced photocatalytic activity of F-ZnO-m may be attributed to factors such as large surface area. The F-ZnO-m is highly recyclable and retained 98.6% of the initial decolorization rate after fifteen cycles. Interestingly, the F-ZnO-m samples show very strong antibacterial properties against both Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus) after exposure to UV-light for 30 min. The antibacterial properties of F-ZnO-m samples are more effective than those of ZnO NPs. More than 96.6% of the E. coli is sterilized after ten cycles. These results indicate that F-ZnO-m samples might have utility in several promising applications such as highly efficient water/air treatment and inactivation of pathogenic microorganisms.

  • PDF